This patch fixes the following checkpatch.pl warning:
Block comments use * on subsequent lines
Signed-off-by: Shaily Sangwan <shaily15297@xxxxxxxxx>
---
drivers/staging/rtl8712/rtl8712_recv.h | 14 +-
drivers/staging/rtl8712/rtl871x_cmd.h | 264 ++++++++++++++++-----------------
2 files changed, 139 insertions(+), 139 deletions(-)
diff --git a/drivers/staging/rtl8712/rtl8712_recv.h b/drivers/staging/rtl8712/rtl8712_recv.h
index 96ca3e2..0b0c273 100644
--- a/drivers/staging/rtl8712/rtl8712_recv.h
+++ b/drivers/staging/rtl8712/rtl8712_recv.h
@@ -116,13 +116,13 @@ struct recv_buf {
};
/*
- head ----->
- data ----->
- payload
- tail ----->
- end ----->
- len = (unsigned int )(tail - data);
-*/
+ * head ----->
+ * data ----->
+ * payload
+ * tail ----->
+ * end ----->
+ * len = (unsigned int )(tail - data);
+ */
struct recv_frame_hdr {
struct list_head list;
_pkt *pkt;
diff --git a/drivers/staging/rtl8712/rtl871x_cmd.h b/drivers/staging/rtl8712/rtl871x_cmd.h
index a2cee36..3284dcf 100644
--- a/drivers/staging/rtl8712/rtl871x_cmd.h
+++ b/drivers/staging/rtl8712/rtl871x_cmd.h
@@ -217,15 +217,15 @@ struct SetMacAddr_param {
};
/*
-Caller Ad-Hoc/AP
-
-Command -Rsp(AID == CAMID) mode
-
-This is to force fw to add an sta_data entry per driver's request.
-
-FW will write an cam entry associated with it.
-
-*/
+ * Caller Ad-Hoc/AP
+ *
+ * Command -Rsp(AID == CAMID) mode
+ *
+ * This is to force fw to add an sta_data entry per driver's request.
+ *
+ * FW will write an cam entry associated with it.
+ *
+ */
struct set_assocsta_parm {
u8 addr[ETH_ALEN];
};
@@ -236,27 +236,27 @@ struct set_assocsta_rsp {
};
/*
- Caller Ad-Hoc/AP
-
- Command mode
-
- This is to force fw to del an sta_data entry per driver's request
-
- FW will invalidate the cam entry associated with it.
-
-*/
+ * Caller Ad-Hoc/AP
+ *
+ * Command mode
+ *
+ * This is to force fw to del an sta_data entry per driver's request
+ *
+ * FW will invalidate the cam entry associated with it.
+ *
+ */
struct del_assocsta_parm {
u8 addr[ETH_ALEN];
};
/*
-Caller Mode: AP/Ad-HoC(M)
-
-Notes: To notify fw that given staid has changed its power state
-
-Command Mode
-
-*/
+ * Caller Mode: AP/Ad-HoC(M)
+ *
+ * Notes: To notify fw that given staid has changed its power state
+ *
+ * Command Mode
+ *
+ */
struct setstapwrstate_parm {
u8 staid;
u8 status;
@@ -264,25 +264,25 @@ struct setstapwrstate_parm {
};
/*
-Caller Mode: Any
-
-Notes: To setup the basic rate of RTL8711
-
-Command Mode
-
-*/
+ * Caller Mode: Any
+ *
+ * Notes: To setup the basic rate of RTL8711
+ *
+ * Command Mode
+ *
+ */
struct setbasicrate_parm {
u8 basicrates[NumRates];
};
/*
-Caller Mode: Any
-
-Notes: To read the current basic rate
-
-Command-Rsp Mode
-
-*/
+ * Caller Mode: Any
+ *
+ * Notes: To read the current basic rate
+ *
+ * Command-Rsp Mode
+ *
+ */
struct getbasicrate_parm {
u32 rsvd;
};
@@ -292,13 +292,13 @@ struct getbasicrate_rsp {
};
/*
-Caller Mode: Any
-
-Notes: To setup the data rate of RTL8711
-
-Command Mode
-
-*/
+ * Caller Mode: Any
+ *
+ * Notes: To setup the data rate of RTL8711
+ *
+ * Command Mode
+ *
+ */
struct setdatarate_parm {
u8 mac_id;
u8 datarates[NumRates];
@@ -334,13 +334,13 @@ struct SetChannelPlan_param {
};
/*
-Caller Mode: Any
-
-Notes: To read the current data rate
-
-Command-Rsp Mode
-
-*/
+ * Caller Mode: Any
+ *
+ * Notes: To read the current data rate
+ *
+ * Command-Rsp Mode
+ *
+ */
struct getdatarate_parm {
u32 rsvd;
@@ -351,36 +351,36 @@ struct getdatarate_rsp {
/*
-Caller Mode: Any
-AP: AP can use the info for the contents of beacon frame
-Infra: STA can use the info when sitesurveying
-Ad-HoC(M): Like AP
-Ad-HoC(C): Like STA
-
-
-Notes: To set the phy capability of the NIC
-
-Command Mode
-
-*/
+ * Caller Mode: Any
+ * AP: AP can use the info for the contents of beacon frame
+ * Infra: STA can use the info when sitesurveying
+ * Ad-HoC(M): Like AP
+ * Ad-HoC(C): Like STA
+ *
+ *
+ * Notes: To set the phy capability of the NIC
+ *
+ * Command Mode
+ *
+ */
/*
-Caller Mode: Any
-
-Notes: To set the channel/modem/band
-This command will be used when channel/modem/band is changed.
-
-Command Mode
-
-*/
+ * Caller Mode: Any
+ *
+ * Notes: To set the channel/modem/band
+ * This command will be used when channel/modem/band is changed.
+ *
+ * Command Mode
+ *
+ */
/*
-Caller Mode: Any
-
-Notes: To get the current setting of channel/modem/band
-
-Command-Rsp Mode
-
-*/
+ * Caller Mode: Any
+ *
+ * Notes: To get the current setting of channel/modem/band
+ *
+ * Command-Rsp Mode
+ *
+ */
struct getphy_rsp {
u8 rfchannel;
u8 modem;
@@ -430,58 +430,58 @@ struct getrfintfs_parm {
};
/*
- Notes: This command is used for H2C/C2H loopback testing
-
- mac[0] == 0
- ==> CMD mode, return H2C_SUCCESS.
- The following condition must be ture under CMD mode
- mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0;
- s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7;
- s2 == (b1 << 8 | b0);
-
- mac[0] == 1
- ==> CMD_RSP mode, return H2C_SUCCESS_RSP
-
- The rsp layout shall be:
- rsp: parm:
- mac[0] = mac[5];
- mac[1] = mac[4];
- mac[2] = mac[3];
- mac[3] = mac[2];
- mac[4] = mac[1];
- mac[5] = mac[0];
- s0 = s1;
- s1 = swap16(s0);
- w0 = swap32(w1);
- b0 = b1
- s2 = s0 + s1
- b1 = b0
- w1 = w0
-
- mac[0] == 2
- ==> CMD_EVENT mode, return H2C_SUCCESS
- The event layout shall be:
- event: parm:
- mac[0] = mac[5];
- mac[1] = mac[4];
- mac[2] = event's sequence number, starting from 1 to parm's marc[3]
- mac[3] = mac[2];
- mac[4] = mac[1];
- mac[5] = mac[0];
- s0 = swap16(s0) - event.mac[2];
- s1 = s1 + event.mac[2];
- w0 = swap32(w0);
- b0 = b1
- s2 = s0 + event.mac[2]
- b1 = b0
- w1 = swap32(w1) - event.mac[2];
-
- parm->mac[3] is the total event counts that host requested.
-
-
- event will be the same with the cmd's param.
-
-*/
+ * Notes: This command is used for H2C/C2H loopback testing
+ *
+ * mac[0] == 0
+ * ==> CMD mode, return H2C_SUCCESS.
+ * The following condition must be ture under CMD mode
+ * mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0;
+ * s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7;
+ * s2 == (b1 << 8 | b0);
+ *
+ * mac[0] == 1
+ * ==> CMD_RSP mode, return H2C_SUCCESS_RSP
+ *
+ * The rsp layout shall be:
+ * rsp: parm:
+ * mac[0] = mac[5];
+ * mac[1] = mac[4];
+ * mac[2] = mac[3];
+ * mac[3] = mac[2];
+ * mac[4] = mac[1];
+ * mac[5] = mac[0];
+ * s0 = s1;
+ * s1 = swap16(s0);
+ * w0 = swap32(w1);
+ * b0 = b1
+ * s2 = s0 + s1
+ * b1 = b0
+ * w1 = w0
+ *
+ * mac[0] == 2
+ * ==> CMD_EVENT mode, return H2C_SUCCESS
+ * The event layout shall be:
+ * event: parm:
+ * mac[0] = mac[5];
+ * mac[1] = mac[4];
+ * mac[2] = event's sequence number, starting from 1 to parm's marc[3]
+ * mac[3] = mac[2];
+ * mac[4] = mac[1];
+ * mac[5] = mac[0];
+ * s0 = swap16(s0) - event.mac[2];
+ * s1 = s1 + event.mac[2];
+ * w0 = swap32(w0);
+ * b0 = b1
+ * s2 = s0 + event.mac[2]
+ * b1 = b0
+ * w1 = swap32(w1) - event.mac[2];
+ *
+ * parm->mac[3] is the total event counts that host requested.
+ *
+ *
+ * event will be the same with the cmd's param.
+ *
+ */
/* CMD param Formart for DRV INTERNAL CMD HDL*/
struct drvint_cmd_parm {
--
2.7.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
