Fix checkpatch.pl warnings
Signed-off-by: Harsh Jain <harshjain32@xxxxxxxxx>
---
drivers/staging/rts5208/rtsx.c | 21 ++++++++++++++-------
1 files changed, 14 insertions(+), 7 deletions(-)
diff --git a/drivers/staging/rts5208/rtsx.c b/drivers/staging/rts5208/rtsx.c
index 25d095a..d46ee90 100644
--- a/drivers/staging/rts5208/rtsx.c
+++ b/drivers/staging/rts5208/rtsx.c
@@ -88,7 +88,8 @@ static int slave_configure(struct scsi_device *sdev)
* of 512, we'll use that as the scsi device queue's DMA alignment
* mask. Guaranteeing proper alignment of the first buffer will
* have the desired effect because, except at the beginning and
- * the end, scatter-gather buffers follow page boundaries. */
+ * the end, scatter-gather buffers follow page boundaries.
+ */
blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
/* Set the SCSI level to at least 2. We'll leave it at 3 if that's
@@ -187,7 +188,8 @@ static int command_abort(struct scsi_cmnd *srb)
}
/* This invokes the transport reset mechanism to reset the state of the
- * device */
+ * device
+ */
static int device_reset(struct scsi_cmnd *srb)
{
int result = 0;
@@ -661,14 +663,16 @@ static void rtsx_release_resources(struct rtsx_dev *dev)
}
/* First stage of disconnect processing: stop all commands and remove
- * the host */
+ * the host
+ */
static void quiesce_and_remove_host(struct rtsx_dev *dev)
{
struct Scsi_Host *host = rtsx_to_host(dev);
struct rtsx_chip *chip = dev->chip;
/* Prevent new transfers, stop the current command, and
- * interrupt a SCSI-scan or device-reset delay */
+ * interrupt a SCSI-scan or device-reset delay
+ */
mutex_lock(&dev->dev_mutex);
scsi_lock(host);
rtsx_set_stat(chip, RTSX_STAT_DISCONNECT);
@@ -682,7 +686,8 @@ static void quiesce_and_remove_host(struct rtsx_dev *dev)
/* queuecommand won't accept any new commands and the control
* thread won't execute a previously-queued command. If there
- * is such a command pending, complete it with an error. */
+ * is such a command pending, complete it with an error.
+ */
mutex_lock(&dev->dev_mutex);
if (chip->srb) {
chip->srb->result = DID_NO_CONNECT << 16;
@@ -703,7 +708,8 @@ static void release_everything(struct rtsx_dev *dev)
rtsx_release_resources(dev);
/* Drop our reference to the host; the SCSI core will free it
- * when the refcount becomes 0. */
+ * when the refcount becomes 0.
+ */
scsi_host_put(rtsx_to_host(dev));
}
@@ -943,7 +949,8 @@ static int rtsx_probe(struct pci_dev *pci,
rtsx_init_chip(dev->chip);
/* set the supported max_lun and max_id for the scsi host
- * NOTE: the minimal value of max_id is 1 */
+ * NOTE: the minimal value of max_id is 1
+ */
host->max_id = 1;
host->max_lun = dev->chip->max_lun;
--
1.7.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
