Hi On 2016-07-22, Arnd Bergmann wrote: > On Friday, July 22, 2016 7:55:36 AM CEST Jes Sorensen wrote: > > Stefan Lippers-Hollmann <s.l-h@xxxxxx> writes: > > > On 2016-07-20, Arnd Bergmann wrote: > > >> On Wednesday, July 20, 2016 11:33:43 AM CEST Jes Sorensen wrote: > > >> > Arnd Bergmann <arnd@xxxxxxxx> writes: > > >> > > On Wednesday, July 20, 2016 7:25:19 AM CEST Jes Sorensen wrote: > > >> > >> Arnd Bergmann <arnd@xxxxxxxx> writes: [...] > > > While probably not overly common, it was/ is (hardware-wise) a pretty > > > interesting device due to its support for 5 GHz[1] - actually I hoped > > > it to be a (supported-) RTL8192CU variant when I bought it. > > > Unfortunately no driver[2] made it to staging or the proper kernel. > > > > I actually have one of those in my USB dongle box, but as you say, not > > overly common so not sure if/when I'll get to it. > > > > Adding 8192du support for 2.4GHz to rtl8xxxu probably wouldn't be too > > complicated. > > My guess is that these devices have largely been replaced by > 802.11ac devices on the market, and whoever has one of the old ones > probably bought it because of the 5GHz support, so adding 2.4GHz-only > support for it may not help all that much either. Talking purely for myself, I've certainly bought the rtl8192du device because of its 5 GHz support, as I've made it a fairly hard policy for me not to buy 2.4 GHz only devices anymore. But this doesn't mean that a mainline driver only supporting 2.4 GHz for the time being would not be appreciated dearly, given that the current state of the device is pretty much being a doorstop[1] - especially considering that 5 GHz support might even become a possibility at a later time, when 802.11ac devices start demanding most of the functionality for potentially more common newer chipset generations. So even with my current personal policy of only buying 5 GHz capable devices, in practice you probably won't find 5 GHz only AP installations (aside from long range/ outdoor point-to-point connections), be it because of the plethora of existing 2.4 GHz only devices or just because of the longer indoor (walls) range of the 2.4 GHz band. In practice, by far most of my existing wireless devices don't support 5 GHz (the router does, of course) because of the reasons mentioned above, but replacing older devices takes its time. Regards Stefan Lippers-Hollmann [1] yes, I know about https://github.com/lwfinger/rtl8192du/ and even have a couple of clean-up patches pending[2] for the kernel-version branch, but those need some further testing. [2] http://aptosid.com/slh/rtl8192du/kernel-version/ _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
