Fix the checkpatch.pl issues: WARNING: Block comments use * on subsequent lines WARNING: Block comments use a trailing */ on a separate line Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> Cc: Ian Abbott <abbotti@xxxxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/staging/comedi/drivers/ni_pcidio.c | 95 +++++++++++++++--------------- 1 file changed, 48 insertions(+), 47 deletions(-) diff --git a/drivers/staging/comedi/drivers/ni_pcidio.c b/drivers/staging/comedi/drivers/ni_pcidio.c index 35ef192..deaa7f2 100644 --- a/drivers/staging/comedi/drivers/ni_pcidio.c +++ b/drivers/staging/comedi/drivers/ni_pcidio.c @@ -1,50 +1,49 @@ /* - comedi/drivers/ni_pcidio.c - driver for National Instruments PCI-DIO-32HS - - COMEDI - Linux Control and Measurement Device Interface - Copyright (C) 1999,2002 David A. Schleef <ds@xxxxxxxxxxx> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. -*/ + * Comedi driver for National Instruments PCI-DIO-32HS + * + * COMEDI - Linux Control and Measurement Device Interface + * Copyright (C) 1999,2002 David A. Schleef <ds@xxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + /* -Driver: ni_pcidio -Description: National Instruments PCI-DIO32HS, PCI-6533 -Author: ds -Status: works -Devices: [National Instruments] PCI-DIO-32HS (ni_pcidio) - [National Instruments] PXI-6533, PCI-6533 (pxi-6533) - [National Instruments] PCI-6534 (pci-6534) -Updated: Mon, 09 Jan 2012 14:27:23 +0000 - -The DIO32HS board appears as one subdevice, with 32 channels. -Each channel is individually I/O configurable. The channel order -is 0=A0, 1=A1, 2=A2, ... 8=B0, 16=C0, 24=D0. The driver only -supports simple digital I/O; no handshaking is supported. - -DMA mostly works for the PCI-DIO32HS, but only in timed input mode. - -The PCI-DIO-32HS/PCI-6533 has a configurable external trigger. Setting -scan_begin_arg to 0 or CR_EDGE triggers on the leading edge. Setting -scan_begin_arg to CR_INVERT or (CR_EDGE | CR_INVERT) triggers on the -trailing edge. - -This driver could be easily modified to support AT-MIO32HS and -AT-MIO96. - -The PCI-6534 requires a firmware upload after power-up to work, the -firmware data and instructions for loading it with comedi_config -it are contained in the -comedi_nonfree_firmware tarball available from http://www.comedi.org -*/ + * Driver: ni_pcidio + * Description: National Instruments PCI-DIO32HS, PCI-6533 + * Author: ds + * Status: works + * Devices: [National Instruments] PCI-DIO-32HS (ni_pcidio) + * [National Instruments] PXI-6533, PCI-6533 (pxi-6533) + * [National Instruments] PCI-6534 (pci-6534) + * Updated: Mon, 09 Jan 2012 14:27:23 +0000 + * + * The DIO32HS board appears as one subdevice, with 32 channels. Each + * channel is individually I/O configurable. The channel order is 0=A0, + * 1=A1, 2=A2, ... 8=B0, 16=C0, 24=D0. The driver only supports simple + * digital I/O; no handshaking is supported. + * + * DMA mostly works for the PCI-DIO32HS, but only in timed input mode. + * + * The PCI-DIO-32HS/PCI-6533 has a configurable external trigger. Setting + * scan_begin_arg to 0 or CR_EDGE triggers on the leading edge. Setting + * scan_begin_arg to CR_INVERT or (CR_EDGE | CR_INVERT) triggers on the + * trailing edge. + * + * This driver could be easily modified to support AT-MIO32HS and AT-MIO96. + * + * The PCI-6534 requires a firmware upload after power-up to work, the + * firmware data and instructions for loading it with comedi_config + * it are contained in the comedi_nonfree_firmware tarball available from + * http://www.comedi.org + */ #define USE_DMA @@ -649,8 +648,10 @@ static int ni_pcidio_cmd(struct comedi_device *dev, struct comedi_subdevice *s) writeb(1, dev->mmio + AckDelay); writeb(0x0b, dev->mmio + AckNotDelay); writeb(0x01, dev->mmio + Data1Delay); - /* manual, page 4-5: ClockSpeed comment is incorrectly listed - * on DAQOptions */ + /* + * manual, page 4-5: + * ClockSpeed comment is incorrectly listed on DAQOptions + */ writew(0, dev->mmio + ClockSpeed); writeb(0, dev->mmio + DAQOptions); } else { -- 2.9.0 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
