From: David Binder <david.binder@xxxxxxxxxx>
This patch ONLY touches comment lines, i.e., NO executable code is
affected.
* All functions worthy of documenting now use standard kerneldoc
formatting.
* Improper uses of kerneldoc formatting were converted to standard
multi-line comments.
* Multi-line comments were tweaked so as to use appropriate conventions.
Signed-off-by: David Binder <david.binder@xxxxxxxxxx>
Signed-off-by: Tim Sell <Timothy.Sell@xxxxxxxxxx>
Signed-off-by: David Kershner <david.kershner@xxxxxxxxxx>
---
drivers/staging/unisys/visorbus/visorbus_main.c | 420 ++++++++++++++++--------
1 file changed, 289 insertions(+), 131 deletions(-)
diff --git a/drivers/staging/unisys/visorbus/visorbus_main.c b/drivers/staging/unisys/visorbus/visorbus_main.c
index 8c1754f9..2468264 100644
--- a/drivers/staging/unisys/visorbus/visorbus_main.c
+++ b/drivers/staging/unisys/visorbus/visorbus_main.c
@@ -44,11 +44,11 @@ static int visorbus_uevent(struct device *xdev, struct kobj_uevent_env *env);
static int visorbus_match(struct device *xdev, struct device_driver *xdrv);
static void fix_vbus_dev_info(struct visor_device *visordev);
-/* BUS type attributes
- *
- * define & implement display of bus attributes under
- * /sys/bus/visorbus.
+/*
+ * BUS type attributes
*
+ * define & implement display of bus attributes under
+ * /sys/bus/visorbus.
*/
static ssize_t version_show(struct bus_type *bus, char *buf)
@@ -104,7 +104,8 @@ static const struct attribute_group *visorbus_dev_groups[] = {
NULL,
};
-/** This describes the TYPE of bus.
+/*
+ * This describes the TYPE of bus.
* (Don't confuse this with an INSTANCE of the bus.)
*/
struct bus_type visorbus_type = {
@@ -115,8 +116,8 @@ struct bus_type visorbus_type = {
.bus_groups = visorbus_bus_groups,
};
-static long long bus_count; /** number of bus instances */
- /** ever-increasing */
+static long long bus_count; /* number of bus instances */
+ /* ever-increasing */
static void chipset_bus_create(struct visor_device *bus_info);
static void chipset_bus_destroy(struct visor_device *bus_info);
@@ -125,8 +126,9 @@ static void chipset_device_destroy(struct visor_device *dev_info);
static void chipset_device_pause(struct visor_device *dev_info);
static void chipset_device_resume(struct visor_device *dev_info);
-/** These functions are implemented herein, and are called by the chipset
- * driver to notify us about specific events.
+/*
+ * These functions are implemented herein, and are called by the chipset
+ * driver to notify us about specific events.
*/
static struct visorchipset_busdev_notifiers chipset_notifiers = {
.bus_create = chipset_bus_create,
@@ -137,8 +139,9 @@ static struct visorchipset_busdev_notifiers chipset_notifiers = {
.device_resume = chipset_device_resume,
};
-/** These functions are implemented in the chipset driver, and we call them
- * herein when we want to acknowledge a specific event.
+/*
+ * These functions are implemented in the chipset driver, and we call them
+ * herein when we want to acknowledge a specific event.
*/
static struct visorchipset_busdev_responders chipset_responders;
@@ -147,9 +150,9 @@ static struct ultra_vbus_deviceinfo chipset_driverinfo;
/* filled in with info about this driver, wrt it servicing client busses */
static struct ultra_vbus_deviceinfo clientbus_driverinfo;
-/** list of visor_device structs, linked via .list_all */
+/* list of visor_device structs, linked via .list_all */
static LIST_HEAD(list_all_bus_instances);
-/** list of visor_device structs, linked via .list_all */
+/* list of visor_device structs, linked via .list_all */
static LIST_HEAD(list_all_device_instances);
static int
@@ -166,9 +169,14 @@ visorbus_uevent(struct device *xdev, struct kobj_uevent_env *env)
return 0;
}
-/* This is called automatically upon adding a visor_device (device_add), or
- * adding a visor_driver (visorbus_register_visor_driver), and returns 1 iff the
- * provided driver can control the specified device.
+/**
+ * visorbus_match() - called automatically upon adding a visor_device
+ * (device_add), or adding a visor_driver
+ * (visorbus_register_visor_driver)
+ * @xdev: struct device for the device being matched
+ * @xdrv: struct device_driver for driver to match device against
+ *
+ * Return: 1 iff the provided driver can control the specified device
*/
static int
visorbus_match(struct device *xdev, struct device_driver *xdrv)
@@ -200,9 +208,11 @@ visorbus_match(struct device *xdev, struct device_driver *xdrv)
return 0;
}
-/** This is called when device_unregister() is called for the bus device
- * instance, after all other tasks involved with destroying the device
- * are complete.
+/**
+ * visorbus_releae_busdevice() - called when device_unregister() is called for
+ * the bus device instance, after all other tasks
+ * involved with destroying the dev are complete
+ * @xdev: struct device for the bus being released
*/
static void
visorbus_release_busdevice(struct device *xdev)
@@ -212,8 +222,10 @@ visorbus_release_busdevice(struct device *xdev)
kfree(dev);
}
-/** This is called when device_unregister() is called for each child
- * device instance.
+/**
+ * visorbus_release_device() - called when device_unregister() is called for
+ * each child device instance
+ * @xdev: struct device for the visor device being released
*/
static void
visorbus_release_device(struct device *xdev)
@@ -227,9 +239,11 @@ visorbus_release_device(struct device *xdev)
kfree(dev);
}
-/* begin implementation of specific channel attributes to appear under
-* /sys/bus/visorbus<x>/dev<y>/channel
-*/
+/*
+ * begin implementation of specific channel attributes to appear under
+ * /sys/bus/visorbus<x>/dev<y>/channel
+ */
+
static ssize_t physaddr_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
@@ -334,15 +348,11 @@ static const struct attribute_group *visorbus_channel_groups[] = {
/* end implementation of specific channel attributes */
-/* BUS instance attributes
+/*
+ * BUS instance attributes
*
* define & implement display of bus attributes under
- * /sys/bus/visorbus/busses/visorbus<n>.
- *
- * This is a bit hoaky because the kernel does not yet have the infrastructure
- * to separate bus INSTANCE attributes from bus TYPE attributes...
- * so we roll our own. See businst.c / businst.h.
- *
+ * /sys/bus/visorbus/devices/visorbus<n>.
*/
static ssize_t partition_handle_show(struct device *dev,
@@ -493,11 +503,11 @@ static const struct attribute_group *visorbus_groups[] = {
NULL
};
-/* DRIVER attributes
+/*
+ * DRIVER attributes
*
* define & implement display of driver attributes under
* /sys/bus/visorbus/drivers/<drivername>.
- *
*/
static ssize_t
@@ -556,10 +566,20 @@ dev_stop_periodic_work(struct visor_device *dev)
put_device(&dev->device);
}
-/** This is called automatically upon adding a visor_device (device_add), or
- * adding a visor_driver (visorbus_register_visor_driver), but only after
- * visorbus_match has returned 1 to indicate a successful match between
- * driver and device.
+/**
+ * visordriver_probe_device() - handle new visor device coming online
+ * @xdev: struct device for the visor device being probed
+ *
+ * This is called automatically upon adding a visor_device (device_add), or
+ * adding a visor_driver (visorbus_register_visor_driver), but only after
+ * visorbus_match() has returned 1 to indicate a successful match between
+ * driver and device.
+ *
+ * If successful, a reference to the device will be held onto via get_device().
+ *
+ * Return: 0 if successful, meaning the function driver's probe() function
+ * was successful with this device, otherwise a negative errno
+ * value indicating failure reason
*/
static int
visordriver_probe_device(struct device *xdev)
@@ -588,9 +608,15 @@ visordriver_probe_device(struct device *xdev)
return res;
}
-/** This is called when device_unregister() is called for each child device
- * instance, to notify the appropriate visorbus_driver that the device is
- * going away, and to decrease the reference count of the device.
+/**
+ * visordriver_remove_device() - handle visor device going away
+ * @xdev: struct device for the visor device being removed
+ *
+ * This is called when device_unregister() is called for each child device
+ * instance, to notify the appropriate visorbus function driver that the device
+ * is going away, and to decrease the reference count of the device.
+ *
+ * Return: 0 iff successful
*/
static int
visordriver_remove_device(struct device *xdev)
@@ -611,47 +637,54 @@ visordriver_remove_device(struct device *xdev)
return 0;
}
-/** A particular type of visor driver calls this function to register
- * the driver. The caller MUST fill in the following fields within the
- * #drv structure:
- * name, version, owner, channel_types, probe, remove
+/**
+ * visorbus_register_visor_driver() - registers the provided visor driver
+ * for handling one or more visor device
+ * types (channel_types)
+ * @drv: the driver to register
*
- * Here's how the whole Linux bus / driver / device model works.
+ * A visor function driver calls this function to register
+ * the driver. The caller MUST fill in the following fields within the
+ * #drv structure:
+ * name, version, owner, channel_types, probe, remove
*
- * At system start-up, the visorbus kernel module is loaded, which registers
- * visorbus_type as a bus type, using bus_register().
+ * Here's how the whole Linux bus / driver / device model works.
*
- * All kernel modules that support particular device types on a
- * visorbus bus are loaded. Each of these kernel modules calls
- * visorbus_register_visor_driver() in their init functions, passing a
- * visor_driver struct. visorbus_register_visor_driver() in turn calls
- * register_driver(&visor_driver.driver). This .driver member is
- * initialized with generic methods (like probe), whose sole responsibility
- * is to act as a broker for the real methods, which are within the
- * visor_driver struct. (This is the way the subclass behavior is
- * implemented, since visor_driver is essentially a subclass of the
- * generic driver.) Whenever a driver_register() happens, core bus code in
- * the kernel does (see device_attach() in drivers/base/dd.c):
+ * At system start-up, the visorbus kernel module is loaded, which registers
+ * visorbus_type as a bus type, using bus_register().
*
- * for each dev associated with the bus (the bus that driver is on) that
- * does not yet have a driver
- * if bus.match(dev,newdriver) == yes_matched ** .match specified
- * ** during bus_register().
- * newdriver.probe(dev) ** for visor drivers, this will call
- * ** the generic driver.probe implemented in visorbus.c,
- * ** which in turn calls the probe specified within the
- * ** struct visor_driver (which was specified by the
- * ** actual device driver as part of
- * ** visorbus_register_visor_driver()).
+ * All kernel modules that support particular device types on a
+ * visorbus bus are loaded. Each of these kernel modules calls
+ * visorbus_register_visor_driver() in their init functions, passing a
+ * visor_driver struct. visorbus_register_visor_driver() in turn calls
+ * register_driver(&visor_driver.driver). This .driver member is
+ * initialized with generic methods (like probe), whose sole responsibility
+ * is to act as a broker for the real methods, which are within the
+ * visor_driver struct. (This is the way the subclass behavior is
+ * implemented, since visor_driver is essentially a subclass of the
+ * generic driver.) Whenever a driver_register() happens, core bus code in
+ * the kernel does (see device_attach() in drivers/base/dd.c):
*
- * The above dance also happens when a new device appears.
- * So the question is, how are devices created within the system?
- * Basically, just call device_add(dev). See pci_bus_add_devices().
- * pci_scan_device() shows an example of how to build a device struct. It
- * returns the newly-created struct to pci_scan_single_device(), who adds it
- * to the list of devices at PCIBUS.devices. That list of devices is what
- * is traversed by pci_bus_add_devices().
+ * for each dev associated with the bus (the bus that driver is on) that
+ * does not yet have a driver
+ * if bus.match(dev,newdriver) == yes_matched ** .match specified
+ * ** during bus_register().
+ * newdriver.probe(dev) ** for visor drivers, this will call
+ * ** the generic driver.probe implemented in visorbus.c,
+ * ** which in turn calls the probe specified within the
+ * ** struct visor_driver (which was specified by the
+ * ** actual device driver as part of
+ * ** visorbus_register_visor_driver()).
*
+ * The above dance also happens when a new device appears.
+ * So the question is, how are devices created within the system?
+ * Basically, just call device_add(dev). See pci_bus_add_devices().
+ * pci_scan_device() shows an example of how to build a device struct. It
+ * returns the newly-created struct to pci_scan_single_device(), who adds it
+ * to the list of devices at PCIBUS.devices. That list of devices is what
+ * is traversed by pci_bus_add_devices().
+ *
+ * Return: integer indicating success (zero) or failure (non-zero)
*/
int visorbus_register_visor_driver(struct visor_driver *drv)
{
@@ -666,7 +699,8 @@ int visorbus_register_visor_driver(struct visor_driver *drv)
drv->driver.remove = visordriver_remove_device;
drv->driver.owner = drv->owner;
- /* driver_register does this:
+ /*
+ * driver_register does this:
* bus_add_driver(drv)
* ->if (drv.bus) ** (bus_type) **
* driver_attach(drv)
@@ -688,8 +722,12 @@ int visorbus_register_visor_driver(struct visor_driver *drv)
}
EXPORT_SYMBOL_GPL(visorbus_register_visor_driver);
-/** A particular type of visor driver calls this function to unregister
- * the driver, i.e., within its module_exit function.
+/**
+ * visorbus_unregister_visor_driver() - unregisters the provided driver
+ * @drv: the driver to unregister
+ *
+ * A visor function driver calls this function to unregister the driver,
+ * i.e., within its module_exit function.
*/
void
visorbus_unregister_visor_driver(struct visor_driver *drv)
@@ -699,6 +737,19 @@ visorbus_unregister_visor_driver(struct visor_driver *drv)
}
EXPORT_SYMBOL_GPL(visorbus_unregister_visor_driver);
+/**
+ * visorbus_read_channel() - reads from the designated channel into
+ * the provided buffer
+ * @dev: the device whose channel is read from
+ * @offset: the offset into the channel at which reading starts
+ * @dest: the destination buffer that is written into from the channel
+ * @nbytes: the number of bytes to read from the channel
+ *
+ * If receiving a message, use the visorchannel_signalremove()
+ * function instead.
+ *
+ * Return: integer indicating success (zero) or failure (non-zero)
+ */
int
visorbus_read_channel(struct visor_device *dev, unsigned long offset,
void *dest, unsigned long nbytes)
@@ -707,6 +758,19 @@ visorbus_read_channel(struct visor_device *dev, unsigned long offset,
}
EXPORT_SYMBOL_GPL(visorbus_read_channel);
+/**
+ * visorbus_write_channel() - writes the provided buffer into the designated
+ * channel
+ * @dev: the device whose channel is written to
+ * @offset: the offset into the channel at which writing starts
+ * @src: the source buffer that is written into the channel
+ * @nbytes: the number of bytes to write into the channel
+ *
+ * If sending a message, use the visorchannel_signalinsert()
+ * function instead.
+ *
+ * Return: integer indicating success (zero) or failure (non-zero)
+ */
int
visorbus_write_channel(struct visor_device *dev, unsigned long offset,
void *src, unsigned long nbytes)
@@ -715,8 +779,13 @@ visorbus_write_channel(struct visor_device *dev, unsigned long offset,
}
EXPORT_SYMBOL_GPL(visorbus_write_channel);
-/** We don't really have a real interrupt, so for now we just call the
- * interrupt function periodically...
+/**
+ * visorbus_enable_channel_interrupts() - enables interrupts on the
+ * designated device
+ * @dev: the device on which to enable interrupts
+ *
+ * Currently we don't yet have a real interrupt, so for now we just call the
+ * interrupt function periodically via a timer.
*/
void
visorbus_enable_channel_interrupts(struct visor_device *dev)
@@ -725,6 +794,11 @@ visorbus_enable_channel_interrupts(struct visor_device *dev)
}
EXPORT_SYMBOL_GPL(visorbus_enable_channel_interrupts);
+/**
+ * visorbus_disable_channel_interrupts() - disables interrupts on the
+ * designated device
+ * @dev: the device on which to disable interrupts
+ */
void
visorbus_disable_channel_interrupts(struct visor_device *dev)
{
@@ -732,19 +806,28 @@ visorbus_disable_channel_interrupts(struct visor_device *dev)
}
EXPORT_SYMBOL_GPL(visorbus_disable_channel_interrupts);
-/** This is how everything starts from the device end.
- * This function is called when a channel first appears via a ControlVM
- * message. In response, this function allocates a visor_device to
- * correspond to the new channel, and attempts to connect it the appropriate
- * driver. If the appropriate driver is found, the visor_driver.probe()
- * function for that driver will be called, and will be passed the new
- * visor_device that we just created.
+/**
+ * create_visor_device() - create visor device as a result of receiving the
+ * controlvm device_create message for a new device
+ * @dev: a freshly-zeroed struct visor_device, containing only filled-in values
+ * for chipset_bus_no and chipset_dev_no, that will be initialized
+ *
+ * This is how everything starts from the device end.
+ * This function is called when a channel first appears via a ControlVM
+ * message. In response, this function allocates a visor_device to
+ * correspond to the new channel, and attempts to connect it the appropriate
+ * driver. If the appropriate driver is found, the visor_driver.probe()
+ * function for that driver will be called, and will be passed the new
+ * visor_device that we just created.
*
- * It's ok if the appropriate driver is not yet loaded, because in that case
- * the new device struct will just stick around in the bus' list of devices.
- * When the appropriate driver calls visorbus_register_visor_driver(), the
- * visor_driver.probe() for the new driver will be called with the new
- * device.
+ * It's ok if the appropriate driver is not yet loaded, because in that case
+ * the new device struct will just stick around in the bus' list of devices.
+ * When the appropriate driver calls visorbus_register_visor_driver(), the
+ * visor_driver.probe() for the new driver will be called with the new
+ * device.
+ *
+ * Return: 0 if successful, otherwise the negative value returned by
+ * device_add() indicating the reason for failure
*/
static int
create_visor_device(struct visor_device *dev)
@@ -767,14 +850,16 @@ create_visor_device(struct visor_device *dev)
dev->timer.data = (unsigned long)(dev);
dev->timer.function = dev_periodic_work;
- /* bus_id must be a unique name with respect to this bus TYPE
+ /*
+ * bus_id must be a unique name with respect to this bus TYPE
* (NOT bus instance). That's why we need to include the bus
* number within the name.
*/
dev_set_name(&dev->device, "vbus%u:dev%u",
chipset_bus_no, chipset_dev_no);
- /* device_add does this:
+ /*
+ * device_add does this:
* bus_add_device(dev)
* ->device_attach(dev)
* ->for each driver drv registered on the bus that dev is on
@@ -834,13 +919,19 @@ get_vbus_header_info(struct visorchannel *chan,
return 0;
}
-/* Write the contents of <info> to the struct
- * spar_vbus_channel_protocol.chp_info.
+/**
+ * write_vbus_chp_info() - write the contents of <info> to the struct
+ * spar_vbus_channel_protocol.chp_info
+ * @chan: indentifies the s-Par channel that will be updated
+ * @hdr_info: used to find appropriate channel offset to write data
+ * @info: contains the information to write
+ *
+ * Writes chipset info into the channel memory to be used for diagnostic
+ * purposes.
*
- * Returns void since this is debug information and not needed for
+ * Returns no value since this is debug information and not needed for
* device functionality.
*/
-
static void
write_vbus_chp_info(struct visorchannel *chan,
struct spar_vbus_headerinfo *hdr_info,
@@ -854,13 +945,19 @@ write_vbus_chp_info(struct visorchannel *chan,
visorchannel_write(chan, off, info, sizeof(*info));
}
-/* Write the contents of <info> to the struct
- * spar_vbus_channel_protocol.bus_info.
+/**
+ * write_vbus_bus_info() - write the contents of <info> to the struct
+ * spar_vbus_channel_protocol.bus_info
+ * @chan: indentifies the s-Par channel that will be updated
+ * @hdr_info: used to find appropriate channel offset to write data
+ * @info: contains the information to write
+ *
+ * Writes bus info into the channel memory to be used for diagnostic
+ * purposes.
*
- * Returns void since this is debug information and not needed for
+ * Returns no value since this is debug information and not needed for
* device functionality.
*/
-
static void
write_vbus_bus_info(struct visorchannel *chan,
struct spar_vbus_headerinfo *hdr_info,
@@ -874,10 +971,18 @@ write_vbus_bus_info(struct visorchannel *chan,
visorchannel_write(chan, off, info, sizeof(*info));
}
-/* Write the contents of <info> to the
- * struct spar_vbus_channel_protocol.dev_info[<devix>].
+/**
+ * write_vbus_dev_info() - write the contents of <info> to the struct
+ * spar_vbus_channel_protocol.dev_info[<devix>]
+ * @chan: indentifies the s-Par channel that will be updated
+ * @hdr_info: used to find appropriate channel offset to write data
+ * @info: contains the information to write
+ * @devix: the relative device number (0..n-1) of the device on the bus
*
- * Returns void since this is debug information and not needed for
+ * Writes device info into the channel memory to be used for diagnostic
+ * purposes.
+ *
+ * Returns no value since this is debug information and not needed for
* device functionality.
*/
static void
@@ -895,10 +1000,12 @@ write_vbus_dev_info(struct visorchannel *chan,
visorchannel_write(chan, off, info, sizeof(*info));
}
-/* For a child device just created on a client bus, fill in
- * information about the driver that is controlling this device into
- * the the appropriate slot within the vbus channel of the bus
- * instance.
+/**
+ * fix_vbus_dev_info() - for a child device just created on a client bus, fill
+ * in information about the driver that is controlling
+ * this device into the the appropriate slot within the
+ * vbus channel of the bus instance
+ * @visordev: struct visor_device for the desired device
*/
static void
fix_vbus_dev_info(struct visor_device *visordev)
@@ -925,7 +1032,8 @@ fix_vbus_dev_info(struct visor_device *visordev)
visordrv = to_visor_driver(visordev->device.driver);
- /* Within the list of device types (by GUID) that the driver
+ /*
+ * Within the list of device types (by GUID) that the driver
* says it supports, find out which one of those types matches
* the type of this device, so that we can include the device
* type name
@@ -944,15 +1052,21 @@ fix_vbus_dev_info(struct visor_device *visordev)
visordrv->vertag);
write_vbus_dev_info(bdev->visorchannel, hdr_info, &dev_info, dev_no);
- /* Re-write bus+chipset info, because it is possible that this
- * was previously written by our evil counterpart, virtpci.
- */
+ /*
+ * Re-write bus+chipset info, because it is possible that this
+ * was previously written by our evil counterpart, virtpci.
+ */
write_vbus_chp_info(bdev->visorchannel, hdr_info, &chipset_driverinfo);
write_vbus_bus_info(bdev->visorchannel, hdr_info,
&clientbus_driverinfo);
}
-/** Create a device instance for the visor bus itself.
+/**
+ * create_bus_instance() - create a device instance for the visor bus itself
+ * @dev: struct visor_device indicating the bus instance
+ *
+ * Return: 0 for success, otherwise negative errno value indicating reason for
+ * failure
*/
static int
create_bus_instance(struct visor_device *dev)
@@ -993,12 +1107,15 @@ create_bus_instance(struct visor_device *dev)
return 0;
}
-/** Remove a device instance for the visor bus itself.
+/**
+ * remove_bus_instance() - remove a device instance for the visor bus itself
+ * @dev: struct visor_device indentifying the bus to remove
*/
static void
remove_bus_instance(struct visor_device *dev)
{
- /* Note that this will result in the release method for
+ /*
+ * Note that this will result in the release method for
* dev->dev being called, which will call
* visorbus_release_busdevice(). This has something to do with
* the put_device() done in device_unregister(), but I have never
@@ -1015,8 +1132,11 @@ remove_bus_instance(struct visor_device *dev)
device_unregister(&dev->device);
}
-/** Create and register the one-and-only one instance of
- * the visor bus type (visorbus_type).
+/**
+ * create_bus_type() - create and register the one-and-only one instance of
+ * the visor bus type (visorbus_type)
+ * Return: 0 for success, otherwise negative errno value returned by
+ * bus_register() indicating the reason for failure
*/
static int
create_bus_type(void)
@@ -1025,7 +1145,9 @@ create_bus_type(void)
return busreg_rc;
}
-/** Remove the one-and-only one instance of the visor bus type (visorbus_type).
+/**
+ * remove_bus_type() - remove the one-and-only one instance of the visor bus
+ * type (visorbus_type)
*/
static void
remove_bus_type(void)
@@ -1033,7 +1155,8 @@ remove_bus_type(void)
bus_unregister(&visorbus_type);
}
-/** Remove all child visor bus device instances.
+/**
+ * remove_all_visor_devices() - remove all child visor bus device instances
*/
static void
remove_all_visor_devices(void)
@@ -1108,9 +1231,14 @@ chipset_device_destroy(struct visor_device *dev_info)
(*chipset_responders.device_destroy) (dev_info, 0);
}
-/* This is the callback function specified for a function driver, to
- * be called when a pending "pause device" operation has been
- * completed.
+/**
+ * pause_state_change_complete() - the callback function to be called by a
+ * visorbus function driver when a
+ * pending "pause device" operation has
+ * completed
+ * @dev: struct visor_device identifying the paused device
+ * @status: 0 iff the pause state change completed successfully, otherwise
+ * a negative errno value indicating the reason for failure
*/
static void
pause_state_change_complete(struct visor_device *dev, int status)
@@ -1129,9 +1257,14 @@ pause_state_change_complete(struct visor_device *dev, int status)
(*chipset_responders.device_pause) (dev, status);
}
-/* This is the callback function specified for a function driver, to
- * be called when a pending "resume device" operation has been
- * completed.
+/**
+ * resume_state_change_complete() - the callback function to be called by a
+ * visorbus function driver when a
+ * pending "resume device" operation has
+ * completed
+ * @dev: struct visor_device identifying the resumed device
+ * @status: 0 iff the resume state change completed successfully, otherwise
+ * a negative errno value indicating the reason for failure
*/
static void
resume_state_change_complete(struct visor_device *dev, int status)
@@ -1143,16 +1276,24 @@ resume_state_change_complete(struct visor_device *dev, int status)
if (!chipset_responders.device_resume) /* this can never happen! */
return;
- /* Notify the chipset driver that the resume is complete,
+ /*
+ * Notify the chipset driver that the resume is complete,
* which will presumably want to send some sort of response to
* the initiator.
*/
(*chipset_responders.device_resume) (dev, status);
}
-/* Tell the subordinate function driver for a specific device to pause
- * or resume that device. Result is returned asynchronously via a
- * callback function.
+/**
+ * initiate_chipset_device_pause_resume() - start a pause or resume operation
+ * for a visor device
+ * @dev: struct visor_device identifying the device being paused or resumed
+ * @is_pause: true to indicate pause operation, false to indicate resume
+ *
+ * Tell the subordinate function driver for a specific device to pause
+ * or resume that device. Success/failure result is returned asynchronously
+ * via a callback function; see pause_state_change_complete() and
+ * resume_state_change_complete().
*/
static void
initiate_chipset_device_pause_resume(struct visor_device *dev, bool is_pause)
@@ -1179,7 +1320,8 @@ initiate_chipset_device_pause_resume(struct visor_device *dev, bool is_pause)
return;
}
- /* Note that even though both drv->pause() and drv->resume
+ /*
+ * Note that even though both drv->pause() and drv->resume
* specify a callback function, it is NOT necessary for us to
* increment our local module usage count. Reason is, there
* is already a linkage dependency between child function
@@ -1219,12 +1361,28 @@ initiate_chipset_device_pause_resume(struct visor_device *dev, bool is_pause)
}
}
+/**
+ * chipset_device_pause() - start a pause operation for a visor device
+ * @dev_info: struct visor_device identifying the device being paused
+ *
+ * Tell the subordinate function driver for a specific device to pause
+ * that device. Success/failure result is returned asynchronously
+ * via a callback function; see pause_state_change_complete().
+ */
static void
chipset_device_pause(struct visor_device *dev_info)
{
initiate_chipset_device_pause_resume(dev_info, true);
}
+/**
+ * chipset_device_resume() - start a resume operation for a visor device
+ * @dev_info: struct visor_device identifying the device being resumed
+ *
+ * Tell the subordinate function driver for a specific device to resume
+ * that device. Success/failure result is returned asynchronously
+ * via a callback function; see resume_state_change_complete().
+ */
static void
chipset_device_resume(struct visor_device *dev_info)
{
--
1.9.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
