From: David Binder <david.binder@xxxxxxxxxx>
Adds kerneldoc formatting to appropriate functions. Other multi-line
comments now use proper formatting.
Signed-off-by: David Binder <david.binder@xxxxxxxxxx>
Signed-off-by: David Kershner <david.kershner@xxxxxxxxxx>
Reviewed-by: Tim Sell <Timothy.Sell@xxxxxxxxxx>
---
drivers/staging/unisys/visorbus/visorchipset.c | 292 ++++++++++++++++---------
1 file changed, 190 insertions(+), 102 deletions(-)
diff --git a/drivers/staging/unisys/visorbus/visorchipset.c b/drivers/staging/unisys/visorbus/visorchipset.c
index b5942c6..f8e1fa5 100644
--- a/drivers/staging/unisys/visorbus/visorchipset.c
+++ b/drivers/staging/unisys/visorbus/visorchipset.c
@@ -78,10 +78,11 @@ visorchipset_release(struct inode *inode, struct file *file)
return 0;
}
-/* When the controlvm channel is idle for at least MIN_IDLE_SECONDS,
-* we switch to slow polling mode. As soon as we get a controlvm
-* message, we switch back to fast polling mode.
-*/
+/*
+ * When the controlvm channel is idle for at least MIN_IDLE_SECONDS,
+ * we switch to slow polling mode. As soon as we get a controlvm
+ * message, we switch back to fast polling mode.
+ */
#define MIN_IDLE_SECONDS 10
static unsigned long poll_jiffies = POLLJIFFIES_CONTROLVMCHANNEL_FAST;
/* when we got our last controlvm message */
@@ -112,7 +113,8 @@ static struct visorchannel *controlvm_channel;
/* Manages the request payload in the controlvm channel */
struct visor_controlvm_payload_info {
u8 *ptr; /* pointer to base address of payload pool */
- u64 offset; /* offset from beginning of controlvm
+ u64 offset; /*
+ * offset from beginning of controlvm
* channel to beginning of payload * pool
*/
u32 bytes; /* number of bytes in payload pool */
@@ -120,15 +122,17 @@ struct visor_controlvm_payload_info {
static struct visor_controlvm_payload_info controlvm_payload_info;
-/* The following globals are used to handle the scenario where we are unable to
- * offload the payload from a controlvm message due to memory requirements. In
+/*
+ * The following globals are used to handle the scenario where we are unable to
+ * offload the payload from a controlvm message due to memory requirements. In
* this scenario, we simply stash the controlvm message, then attempt to
* process it again the next time controlvm_periodic_work() runs.
*/
static struct controlvm_message controlvm_pending_msg;
static bool controlvm_pending_msg_valid;
-/* This identifies a data buffer that has been received via a controlvm messages
+/*
+ * This identifies a data buffer that has been received via a controlvm messages
* in a remote --> local CONTROLVM_TRANSMIT_FILE conversation.
*/
struct putfile_buffer_entry {
@@ -136,13 +140,15 @@ struct putfile_buffer_entry {
struct parser_context *parser_ctx; /* points to input data buffer */
};
-/* List of struct putfile_request *, via next_putfile_request member.
+/*
+ * List of struct putfile_request *, via next_putfile_request member.
* Each entry in this list identifies an outstanding TRANSMIT_FILE
* conversation.
*/
static LIST_HEAD(putfile_request_list);
-/* This describes a buffer and its current state of transfer (e.g., how many
+/*
+ * This describes a buffer and its current state of transfer (e.g., how many
* bytes have already been supplied as putfile data, and how many bytes are
* remaining) for a putfile_request.
*/
@@ -154,8 +160,9 @@ struct putfile_active_buffer {
};
#define PUTFILE_REQUEST_SIG 0x0906101302281211
-/* This identifies a single remote --> local CONTROLVM_TRANSMIT_FILE
- * conversation. Structs of this type are dynamically linked into
+/*
+ * This identifies a single remote --> local CONTROLVM_TRANSMIT_FILE
+ * conversation. Structs of this type are dynamically linked into
* <Putfile_request_list>.
*/
struct putfile_request {
@@ -167,7 +174,8 @@ struct putfile_request {
/* link to next struct putfile_request */
struct list_head next_putfile_request;
- /* head of putfile_buffer_entry list, which describes the data to be
+ /*
+ * head of putfile_buffer_entry list, which describes the data to be
* supplied as putfile data;
* - this list is added to when controlvm messages come in that supply
* file data
@@ -183,11 +191,13 @@ struct putfile_request {
/* data not yet read within current putfile_buffer_entry */
struct putfile_active_buffer active_buf;
- /* <0 = failed, 0 = in-progress, >0 = successful; */
- /* note that this must be set with req_list_lock, and if you set <0, */
- /* it is your responsibility to also free up all of the other objects */
- /* in this struct (like input_buffer_list, active_buf.parser_ctx) */
- /* before releasing the lock */
+ /*
+ * <0 = failed, 0 = in-progress, >0 = successful;
+ * note that this must be set with req_list_lock, and if you set <0,
+ * it is your responsibility to also free up all of the other objects
+ * in this struct (like input_buffer_list, active_buf.parser_ctx)
+ * before releasing the lock
+ */
int completion_status;
};
@@ -202,9 +212,6 @@ static LIST_HEAD(parahotplug_request_list);
static DEFINE_SPINLOCK(parahotplug_request_list_lock); /* lock for above */
static void parahotplug_process_list(void);
-/* Manages the info for a CONTROLVM_DUMP_CAPTURESTATE /
- * CONTROLVM_REPORTEVENT.
- */
static struct visorchipset_busdev_notifiers busdev_notifiers;
static void bus_create_response(struct visor_device *p, int response);
@@ -226,7 +233,7 @@ static struct visorchipset_busdev_responders busdev_responders = {
};
/* info for /dev/visorchipset */
-static dev_t major_dev = -1; /**< indicates major num for device */
+static dev_t major_dev = -1; /*< indicates major num for device */
/* prototypes for attributes */
static ssize_t toolaction_show(struct device *dev,
@@ -396,8 +403,9 @@ parser_id_get(struct parser_context *ctx)
return phdr->id;
}
-/** Describes the state from the perspective of which controlvm messages have
- * been received for a bus or device.
+/*
+ * Describes the state from the perspective of which controlvm messages have
+ * been received for a bus or device.
*/
enum PARSER_WHICH_STRING {
@@ -722,14 +730,16 @@ chipset_init(struct controlvm_message *inmsg)
chipset_inited = 1;
POSTCODE_LINUX_2(CHIPSET_INIT_EXIT_PC, POSTCODE_SEVERITY_INFO);
- /* Set features to indicate we support parahotplug (if Command
+ /*
+ * Set features to indicate we support parahotplug (if Command
* also supports it).
*/
features =
inmsg->cmd.init_chipset.
features & ULTRA_CHIPSET_FEATURE_PARA_HOTPLUG;
- /* Set the "reply" bit so Command knows this is a
+ /*
+ * Set the "reply" bit so Command knows this is a
* features-aware driver.
*/
features |= ULTRA_CHIPSET_FEATURE_REPLY;
@@ -920,8 +930,10 @@ bus_epilog(struct visor_device *bus_info,
down(¬ifier_lock);
if (!bus_info) {
- /* relying on a valid passed in response code */
- /* be lazy and re-use msg_hdr for this failure, is this ok?? */
+ /*
+ * relying on a valid passed in response code
+ * be lazy and re-use msg_hdr for this failure, is this ok??
+ */
pmsg_hdr = msg_hdr;
goto out_respond_and_unlock;
}
@@ -984,8 +996,10 @@ device_epilog(struct visor_device *dev_info,
down(¬ifier_lock);
if (!dev_info) {
- /* relying on a valid passed in response code */
- /* be lazy and re-use msg_hdr for this failure, is this ok?? */
+ /*
+ * relying on a valid passed in response code
+ * be lazy and re-use msg_hdr for this failure, is this ok??
+ */
pmsg_hdr = msg_hdr;
goto out_respond_and_unlock;
}
@@ -1031,7 +1045,8 @@ device_epilog(struct visor_device *dev_info,
else if (state.alive == segment_state_standby.alive &&
state.operating ==
segment_state_standby.operating) {
- /* technically this is standby case
+ /*
+ * technically this is standby case
* where server is lost
*/
if (notifiers->device_pause) {
@@ -1300,11 +1315,19 @@ my_device_destroy(struct controlvm_message *inmsg)
inmsg->hdr.flags.response_expected == 1, 1);
}
-/* When provided with the physical address of the controlvm channel
+/**
+ * initialize_controlvm_payload_info() - init controlvm_payload_info struct
+ * @phys_addr: the physical address of controlvm channel
+ * @offset: the offset to payload
+ * @bytes: the size of the payload in bytes
+ * @info: the returning valid struct
+ *
+ * When provided with the physical address of the controlvm channel
* (phys_addr), the offset to the payload area we need to manage
* (offset), and the size of this payload area (bytes), fills in the
- * controlvm_payload_info struct. Returns true for success or false
- * for failure.
+ * controlvm_payload_info struct.
+ *
+ * Return: CONTROLVM_RESP_SUCCESS for success or a negative for failure
*/
static int
initialize_controlvm_payload_info(u64 phys_addr, u64 offset, u32 bytes,
@@ -1368,8 +1391,12 @@ initialize_controlvm_payload(void)
&controlvm_payload_info);
}
-/* Send ACTION=online for DEVPATH=/sys/devices/platform/visorchipset.
- * Returns CONTROLVM_RESP_xxx code.
+/**
+ * visorchipset_chipset_ready() - sends chipset_ready action
+ *
+ * Send ACTION=online for DEVPATH=/sys/devices/platform/visorchipset.
+ *
+ * Return: CONTROLVM_RESP_SUCCESS
*/
static int
visorchipset_chipset_ready(void)
@@ -1390,8 +1417,12 @@ visorchipset_chipset_selftest(void)
return CONTROLVM_RESP_SUCCESS;
}
-/* Send ACTION=offline for DEVPATH=/sys/devices/platform/visorchipset.
- * Returns CONTROLVM_RESP_xxx code.
+/**
+ * visorchipset_chipset_notready() - sends chipset_notready action
+ *
+ * Send ACTION=offline for DEVPATH=/sys/devices/platform/visorchipset.
+ *
+ * Return: CONTROLVM_RESP_SUCCESS
*/
static int
visorchipset_chipset_notready(void)
@@ -1433,8 +1464,13 @@ chipset_notready(struct controlvm_message_header *msg_hdr)
controlvm_respond(msg_hdr, rc);
}
-/* This is your "one-stop" shop for grabbing the next message from the
- * CONTROLVM_QUEUE_EVENT queue in the controlvm channel.
+/**
+ * read_controlvm_event() - retreives the next message from the
+ * CONTROLVM_QUEUE_EVENT queue in the controlvm
+ * channel
+ * @msg: pointer to the retrieved message
+ *
+ * Return: true if a valid message was retrieved or false otherwise
*/
static bool
read_controlvm_event(struct controlvm_message *msg)
@@ -1450,13 +1486,13 @@ read_controlvm_event(struct controlvm_message *msg)
}
/*
- * The general parahotplug flow works as follows. The visorchipset
+ * The general parahotplug flow works as follows. The visorchipset
* driver receives a DEVICE_CHANGESTATE message from Command
- * specifying a physical device to enable or disable. The CONTROLVM
+ * specifying a physical device to enable or disable. The CONTROLVM
* message handler calls parahotplug_process_message, which then adds
* the message to a global list and kicks off a udev event which
* causes a user level script to enable or disable the specified
- * device. The udev script then writes to
+ * device. The udev script then writes to
* /proc/visorchipset/parahotplug, which causes parahotplug_proc_write
* to get called, at which point the appropriate CONTROLVM message is
* retrieved from the list and responded to.
@@ -1464,9 +1500,11 @@ read_controlvm_event(struct controlvm_message *msg)
#define PARAHOTPLUG_TIMEOUT_MS 2000
-/*
- * Generate unique int to match an outstanding CONTROLVM message with a
- * udev script /proc response
+/**
+ * parahotplug_next_id() - generate unique int to match an outstanding CONTROLVM
+ * message with a udev script /proc response
+ *
+ * Return: a unique integer value
*/
static int
parahotplug_next_id(void)
@@ -1476,9 +1514,12 @@ parahotplug_next_id(void)
return atomic_inc_return(&id);
}
-/*
- * Returns the time (in jiffies) when a CONTROLVM message on the list
- * should expire -- PARAHOTPLUG_TIMEOUT_MS in the future
+/**
+ * parahotplug_next_expiration() - returns the time (in jiffies) when a
+ * CONTROLVM message on the list should expire
+ * -- PARAHOTPLUG_TIMEOUT_MS in the future
+ *
+ * Return: expected expiration time (in jiffies)
*/
static unsigned long
parahotplug_next_expiration(void)
@@ -1486,9 +1527,13 @@ parahotplug_next_expiration(void)
return jiffies + msecs_to_jiffies(PARAHOTPLUG_TIMEOUT_MS);
}
-/*
- * Create a parahotplug_request, which is basically a wrapper for a
- * CONTROLVM_MESSAGE that we can stick on a list
+/**
+ * parahotplug_request_create() - create a parahotplug_request, which is
+ * basically a wrapper for a CONTROLVM_MESSAGE
+ * that we can stick on a list
+ * @msg: the message to insert in the request
+ *
+ * Return: the request containing the provided message
*/
static struct parahotplug_request *
parahotplug_request_create(struct controlvm_message *msg)
@@ -1506,8 +1551,9 @@ parahotplug_request_create(struct controlvm_message *msg)
return req;
}
-/*
- * Free a parahotplug_request.
+/**
+ * parahotplug_request_destroy() - free a parahotplug_request
+ * @req: the request to deallocate
*/
static void
parahotplug_request_destroy(struct parahotplug_request *req)
@@ -1515,10 +1561,12 @@ parahotplug_request_destroy(struct parahotplug_request *req)
kfree(req);
}
-/*
- * Cause uevent to run the user level script to do the disable/enable
- * specified in (the CONTROLVM message in) the specified
- * parahotplug_request
+/**
+ * parahotplug_request_kickoff() - initiate parahotplug request
+ * @req: the request to initiate
+ *
+ * Cause uevent to run the user level script to do the disable/enable specified
+ * in the parahotplug_request.
*/
static void
parahotplug_request_kickoff(struct parahotplug_request *req)
@@ -1545,9 +1593,9 @@ parahotplug_request_kickoff(struct parahotplug_request *req)
envp);
}
-/*
- * Remove any request from the list that's been on there too long and
- * respond with an error.
+/**
+ * parahotplug_process_list() - remove any request from the list that's been on
+ * there too long and respond with an error
*/
static void
parahotplug_process_list(void)
@@ -1576,10 +1624,16 @@ parahotplug_process_list(void)
spin_unlock(¶hotplug_request_list_lock);
}
-/*
+/**
+ * parahotplug_request_complete() - mark request as complete
+ * @id: the id of the request
+ * @active: indicates whether the request is assigned to active partition
+ *
* Called from the /proc handler, which means the user script has
- * finished the enable/disable. Find the matching identifier, and
+ * finished the enable/disable. Find the matching identifier, and
* respond to the CONTROLVM message with success.
+ *
+ * Return: 0 on success or -EINVAL on failure
*/
static int
parahotplug_request_complete(int id, u16 active)
@@ -1594,7 +1648,8 @@ parahotplug_request_complete(int id, u16 active)
struct parahotplug_request *req =
list_entry(pos, struct parahotplug_request, list);
if (req->id == id) {
- /* Found a match. Remove it from the list and
+ /*
+ * Found a match. Remove it from the list and
* respond.
*/
list_del(pos);
@@ -1613,8 +1668,10 @@ parahotplug_request_complete(int id, u16 active)
return -EINVAL;
}
-/*
- * Enables or disables a PCI device by kicking off a udev script
+/**
+ * parahotplug_process_message() - enables or disables a PCI device by kicking
+ * off a udev script
+ * @inmsg: the message indicating whether to enable or disable
*/
static void
parahotplug_process_message(struct controlvm_message *inmsg)
@@ -1627,14 +1684,16 @@ parahotplug_process_message(struct controlvm_message *inmsg)
return;
if (inmsg->cmd.device_change_state.state.active) {
- /* For enable messages, just respond with success
- * right away. This is a bit of a hack, but there are
- * issues with the early enable messages we get (with
- * either the udev script not detecting that the device
- * is up, or not getting called at all). Fortunately
- * the messages that get lost don't matter anyway, as
- * devices are automatically enabled at
- * initialization.
+ /*
+ * For enable messages, just respond with success
+ * right away. This is a bit of a hack, but there are
+ * issues with the early enable messages we get (with
+ * either the udev script not detecting that the device
+ * is up, or not getting called at all). Fortunately
+ * the messages that get lost don't matter anyway, as
+ *
+ * devices are automatically enabled at
+ * initialization.
*/
parahotplug_request_kickoff(req);
controlvm_respond_physdev_changestate
@@ -1643,11 +1702,12 @@ parahotplug_process_message(struct controlvm_message *inmsg)
inmsg->cmd.device_change_state.state);
parahotplug_request_destroy(req);
} else {
- /* For disable messages, add the request to the
- * request list before kicking off the udev script. It
- * won't get responded to until the script has
- * indicated it's done.
- */
+ /*
+ * For disable messages, add the request to the
+ * request list before kicking off the udev script. It
+ * won't get responded to until the script has
+ * indicated it's done.
+ */
spin_lock(¶hotplug_request_list_lock);
list_add_tail(&req->list, ¶hotplug_request_list);
spin_unlock(¶hotplug_request_list_lock);
@@ -1656,8 +1716,12 @@ parahotplug_process_message(struct controlvm_message *inmsg)
}
}
-/* Process a controlvm message.
- * Return result:
+/**
+ * handle_command() - process a controlvm message
+ * @inmsg: the message to process
+ * @channel_addr: address of the controlvm channel
+ *
+ * Return:
* false - this function will return false only in the case where the
* controlvm message was NOT processed, but processing must be
* retried before reading the next controlvm message; a
@@ -1665,7 +1729,7 @@ parahotplug_process_message(struct controlvm_message *inmsg)
* the allocation of memory in which to copy out controlvm
* payload data
* true - processing of the controlvm message completed,
- * either successfully or with an error.
+ * either successfully or with an error
*/
static bool
handle_command(struct controlvm_message inmsg, u64 channel_addr)
@@ -1684,8 +1748,9 @@ handle_command(struct controlvm_message inmsg, u64 channel_addr)
parm_addr = channel_addr + inmsg.hdr.payload_vm_offset;
parm_bytes = inmsg.hdr.payload_bytes;
- /* Parameter and channel addresses within test messages actually lie
- * within our OS-controlled memory. We need to know that, because it
+ /*
+ * Parameter and channel addresses within test messages actually lie
+ * within our OS-controlled memory. We need to know that, because it
* makes a difference in how we compute the virtual address.
*/
if (parm_addr && parm_bytes) {
@@ -1726,8 +1791,10 @@ handle_command(struct controlvm_message inmsg, u64 channel_addr)
if (cmd->device_change_state.flags.phys_device) {
parahotplug_process_message(&inmsg);
} else {
- /* save the hdr and cmd structures for later use */
- /* when sending back the response to Command */
+ /*
+ * save the hdr and cmd structures for later use
+ * when sending back the response to Command
+ */
my_device_changestate(&inmsg);
g_devicechangestate_packet = inmsg.cmd;
break;
@@ -1809,10 +1876,11 @@ controlvm_periodic_work(struct work_struct *work)
;
if (!got_command) {
if (controlvm_pending_msg_valid) {
- /* we throttled processing of a prior
- * msg, so try to process it again
- * rather than reading a new one
- */
+ /*
+ * we throttled processing of a prior
+ * msg, so try to process it again
+ * rather than reading a new one
+ */
inmsg = controlvm_pending_msg;
controlvm_pending_msg_valid = false;
got_command = true;
@@ -1829,12 +1897,13 @@ controlvm_periodic_work(struct work_struct *work)
(controlvm_channel)))
got_command = read_controlvm_event(&inmsg);
else {
- /* this is a scenario where throttling
- * is required, but probably NOT an
- * error...; we stash the current
- * controlvm msg so we will attempt to
- * reprocess it on our next loop
- */
+ /*
+ * this is a scenario where throttling
+ * is required, but probably NOT an
+ * error...; we stash the current
+ * controlvm msg so we will attempt to
+ * reprocess it on our next loop
+ */
handle_command_failed = true;
controlvm_pending_msg = inmsg;
controlvm_pending_msg_valid = true;
@@ -1848,10 +1917,11 @@ cleanup:
if (time_after(jiffies,
most_recent_message_jiffies + (HZ * MIN_IDLE_SECONDS))) {
- /* it's been longer than MIN_IDLE_SECONDS since we
- * processed our last controlvm message; slow down the
- * polling
- */
+ /*
+ * it's been longer than MIN_IDLE_SECONDS since we
+ * processed our last controlvm message; slow down the
+ * polling
+ */
if (poll_jiffies != POLLJIFFIES_CONTROLVMCHANNEL_SLOW)
poll_jiffies = POLLJIFFIES_CONTROLVMCHANNEL_SLOW;
} else {
@@ -2024,9 +2094,18 @@ device_resume_response(struct visor_device *dev_info, int response)
dev_info->pending_msg_hdr = NULL;
}
-/* The parahotplug/devicedisabled interface gets called by our support script
+/**
+ * devicedisabled_store() - disables the hotplug device
+ * @dev: sysfs interface variable not utilized in this function
+ * @attr: sysfs interface variable not utilized in this function
+ * @buf: buffer containing the device id
+ * @count: the size of the buffer
+ *
+ * The parahotplug/devicedisabled interface gets called by our support script
* when an SR-IOV device has been shut down. The ID is passed to the script
* and then passed back when the device has been removed.
+ *
+ * Return: the size of the buffer for success or negative for error
*/
static ssize_t devicedisabled_store(struct device *dev,
struct device_attribute *attr,
@@ -2044,9 +2123,18 @@ static ssize_t devicedisabled_store(struct device *dev,
return count;
}
-/* The parahotplug/deviceenabled interface gets called by our support script
+/**
+ * deviceenabled_store() - enables the hotplug device
+ * @dev: sysfs interface variable not utilized in this function
+ * @attr: sysfs interface variable not utilized in this function
+ * @buf: buffer containing the device id
+ * @count: the size of the buffer
+ *
+ * The parahotplug/deviceenabled interface gets called by our support script
* when an SR-IOV device has been recovered. The ID is passed to the script
* and then passed back when the device has been brought back up.
+ *
+ * Return: the size of the buffer for success or negative for error
*/
static ssize_t deviceenabled_store(struct device *dev,
struct device_attribute *attr,
--
1.9.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
