This is a patch to the das16m1.c file that fixes up a
WARNING: 'Block comments use a trailing */ on a separate line'
found by the checkpatch.pl tool.
Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@xxxxxxxxx>
---
drivers/staging/comedi/drivers/das16m1.c | 168 ++++++++++++++++---------------
1 file changed, 89 insertions(+), 79 deletions(-)
diff --git a/drivers/staging/comedi/drivers/das16m1.c b/drivers/staging/comedi/drivers/das16m1.c
index 3a37373..c71a7e0 100644
--- a/drivers/staging/comedi/drivers/das16m1.c
+++ b/drivers/staging/comedi/drivers/das16m1.c
@@ -1,56 +1,56 @@
/*
- comedi/drivers/das16m1.c
- CIO-DAS16/M1 driver
- Author: Frank Mori Hess, based on code from the das16
- driver.
- Copyright (C) 2001 Frank Mori Hess <fmhess@xxxxxxxxxxxxxxxxxxxxx>
-
- COMEDI - Linux Control and Measurement Device Interface
- Copyright (C) 2000 David A. Schleef <ds@xxxxxxxxxxx>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-*/
+ * comedi/drivers/das16m1.c
+ * CIO-DAS16/M1 driver
+ * Author: Frank Mori Hess, based on code from the das16
+ * driver.
+ * Copyright (C) 2001 Frank Mori Hess <fmhess@xxxxxxxxxxxxxxxxxxxxx>
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 2000 David A. Schleef <ds@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
/*
-Driver: das16m1
-Description: CIO-DAS16/M1
-Author: Frank Mori Hess <fmhess@xxxxxxxxxxxxxxxxxxxxx>
-Devices: [Measurement Computing] CIO-DAS16/M1 (das16m1)
-Status: works
-
-This driver supports a single board - the CIO-DAS16/M1.
-As far as I know, there are no other boards that have
-the same register layout. Even the CIO-DAS16/M1/16 is
-significantly different.
-
-I was _barely_ able to reach the full 1 MHz capability
-of this board, using a hard real-time interrupt
-(set the TRIG_RT flag in your struct comedi_cmd and use
-rtlinux or RTAI). The board can't do dma, so the bottleneck is
-pulling the data across the ISA bus. I timed the interrupt
-handler, and it took my computer ~470 microseconds to pull 512
-samples from the board. So at 1 Mhz sampling rate,
-expect your CPU to be spending almost all of its
-time in the interrupt handler.
-
-This board has some unusual restrictions for its channel/gain list. If the
-list has 2 or more channels in it, then two conditions must be satisfied:
-(1) - even/odd channels must appear at even/odd indices in the list
-(2) - the list must have an even number of entries.
-
-Options:
- [0] - base io address
- [1] - irq (optional, but you probably want it)
-
-irq can be omitted, although the cmd interface will not work without it.
-*/
+ * Driver: das16m1
+ * Description: CIO-DAS16/M1
+ * Author: Frank Mori Hess <fmhess@xxxxxxxxxxxxxxxxxxxxx>
+ * Devices: [Measurement Computing] CIO-DAS16/M1 (das16m1)
+ * Status: works
+ *
+ * This driver supports a single board - the CIO-DAS16/M1.
+ * As far as I know, there are no other boards that have
+ * the same register layout. Even the CIO-DAS16/M1/16 is
+ * significantly different.
+ *
+ * I was _barely_ able to reach the full 1 MHz capability
+ * of this board, using a hard real-time interrupt
+ * (set the TRIG_RT flag in your struct comedi_cmd and use
+ * rtlinux or RTAI). The board can't do dma, so the bottleneck is
+ * pulling the data across the ISA bus. I timed the interrupt
+ * handler, and it took my computer ~470 microseconds to pull 512
+ * samples from the board. So at 1 Mhz sampling rate,
+ * expect your CPU to be spending almost all of its
+ * time in the interrupt handler.
+ *
+ * This board has some unusual restrictions for its channel/gain list. If the
+ * list has 2 or more channels in it, then two conditions must be satisfied:
+ * (1) - even/odd channels must appear at even/odd indices in the list
+ * (2) - the list must have an even number of entries.
+ *
+ * Options:
+ * [0] - base io address
+ * [1] - irq (optional, but you probably want it)
+ *
+ * irq can be omitted, although the cmd interface will not work without it.
+ */
#include <linux/module.h>
#include <linux/slab.h>
@@ -65,24 +65,24 @@ irq can be omitted, although the cmd interface will not work without it.
#define FIFO_SIZE 1024 /* 1024 sample fifo */
/*
- CIO-DAS16_M1.pdf
-
- "cio-das16/m1"
-
- 0 a/d bits 0-3, mux start 12 bit
- 1 a/d bits 4-11 unused
- 2 status control
- 3 di 4 bit do 4 bit
- 4 unused clear interrupt
- 5 interrupt, pacer
- 6 channel/gain queue address
- 7 channel/gain queue data
- 89ab 8254
- cdef 8254
- 400 8255
- 404-407 8254
-
-*/
+ * CIO-DAS16_M1.pdf
+ *
+ * "cio-das16/m1"
+ *
+ * 0 a/d bits 0-3, mux start 12 bit
+ * 1 a/d bits 4-11 unused
+ * 2 status control
+ * 3 di 4 bit do 4 bit
+ * 4 unused clear interrupt
+ * 5 interrupt, pacer
+ * 6 channel/gain queue address
+ * 7 channel/gain queue data
+ * 89ab 8254
+ * cdef 8254
+ * 400 8255
+ * 404-407 8254
+ *
+ */
#define DAS16M1_AI 0 /* 16-bit wide register */
#define AI_CHAN(x) ((x) & 0xf)
@@ -125,9 +125,11 @@ struct das16m1_private_struct {
struct comedi_8254 *counter;
unsigned int control_state;
unsigned int adc_count; /* number of samples completed */
- /* initial value in lower half of hardware conversion counter,
+ /*
+ * initial value in lower half of hardware conversion counter,
* needed to keep track of whether new count has been loaded into
- * counter yet (loaded by first sample conversion) */
+ * counter yet (loaded by first sample conversion)
+ */
u16 initial_hw_count;
unsigned short ai_buffer[FIFO_SIZE];
unsigned long extra_iobase;
@@ -295,8 +297,10 @@ static int das16m1_cmd_exec(struct comedi_device *dev,
/* set control & status register */
byte = 0;
- /* if we are using external start trigger (also board dislikes having
- * both start and conversion triggers external simultaneously) */
+ /*
+ * if we are using external start trigger (also board dislikes having
+ * both start and conversion triggers external simultaneously)
+ */
if (cmd->start_src == TRIG_EXT && cmd->convert_src != TRIG_EXT)
byte |= EXT_TRIG_BIT;
@@ -409,20 +413,24 @@ static void das16m1_handler(struct comedi_device *dev, unsigned int status)
/* figure out how many samples are in fifo */
hw_counter = comedi_8254_read(devpriv->counter, 1);
- /* make sure hardware counter reading is not bogus due to initial value
- * not having been loaded yet */
+ /*
+ * make sure hardware counter reading is not bogus due to initial value
+ * not having been loaded yet
+ */
if (devpriv->adc_count == 0 &&
hw_counter == devpriv->initial_hw_count) {
num_samples = 0;
} else {
- /* The calculation of num_samples looks odd, but it uses the
+ /*
+ * The calculation of num_samples looks odd, but it uses the
* following facts. 16 bit hardware counter is initialized with
* value of zero (which really means 0x1000). The counter
* decrements by one on each conversion (when the counter
* decrements from zero it goes to 0xffff). num_samples is a
* 16 bit variable, so it will roll over in a similar fashion
* to the hardware counter. Work it out, and this is what you
- * get. */
+ * get.
+ */
num_samples = -hw_counter - devpriv->adc_count;
}
/* check if we only need some of the points */
@@ -445,8 +453,10 @@ static void das16m1_handler(struct comedi_device *dev, unsigned int status)
}
}
- /* this probably won't catch overruns since the card doesn't generate
- * overrun interrupts, but we might as well try */
+ /*
+ * this probably won't catch overruns since the card doesn't generate
+ * overrun interrupts, but we might as well try
+ */
if (status & OVRUN) {
async->events |= COMEDI_CB_ERROR;
dev_err(dev->class_dev, "fifo overflow\n");
--
1.9.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
