Replace the existing macros in "plx9080.h" that define values for the
DMPBAM register. Use the prefix `PLX_DMPBAM_` for the macros. Make use
of the `BIT(x)` and `GENMASK(h,l)` macros to define the values.
Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx>
---
drivers/staging/comedi/drivers/plx9080.h | 48 ++++++++++++++++++++++----------
1 file changed, 34 insertions(+), 14 deletions(-)
diff --git a/drivers/staging/comedi/drivers/plx9080.h b/drivers/staging/comedi/drivers/plx9080.h
index 93b2e89..ab90837 100644
--- a/drivers/staging/comedi/drivers/plx9080.h
+++ b/drivers/staging/comedi/drivers/plx9080.h
@@ -228,20 +228,40 @@ struct plx_dma_desc {
/* PCI Base Address (Remap) Register for Direct Master to PCI Memory */
#define PLX_REG_DMPBAM 0x0028
-#define DMM_MAE 0x00000001 /* Direct Mstr Memory Acc Enable */
-#define DMM_IAE 0x00000002 /* Direct Mstr I/O Acc Enable */
-#define DMM_LCK 0x00000004 /* LOCK Input Enable */
-#define DMM_PF4 0x00000008 /* Prefetch 4 Mode Enable */
-#define DMM_THROT 0x00000010 /* Assert IRDY when read FIFO full */
-#define DMM_PAF0 0x00000000 /* Programmable Almost fill level */
-#define DMM_PAF1 0x00000020 /* Programmable Almost fill level */
-#define DMM_PAF2 0x00000040 /* Programmable Almost fill level */
-#define DMM_PAF3 0x00000060 /* Programmable Almost fill level */
-#define DMM_PAF4 0x00000080 /* Programmable Almost fill level */
-#define DMM_PAF5 0x000000A0 /* Programmable Almost fill level */
-#define DMM_PAF6 0x000000C0 /* Programmable Almost fill level */
-#define DMM_PAF7 0x000000D0 /* Programmable Almost fill level */
-#define DMM_MAP 0xFFFF0000 /* Remap Address Bits */
+/* Direct Master Memory Access Enable */
+#define PLX_DMPBAM_MEMACCEN BIT(0)
+/* Direct Master I/O Access Enable */
+#define PLX_DMPBAM_IOACCEN BIT(1)
+/* LLOCK# Input Enable */
+#define PLX_DMPBAM_LLOCKIEN BIT(2)
+/* Direct Master Read Prefetch Size Control (bits 12, 3) */
+#define PLX_DMPBAM_RPSIZECONT ((BIT(12) * 0) | (BIT(3) * 0))
+#define PLX_DMPBAM_RPSIZE4 ((BIT(12) * 0) | (BIT(3) * 1))
+#define PLX_DMPBAM_RPSIZE8 ((BIT(12) * 1) | (BIT(3) * 0))
+#define PLX_DMPBAM_RPSIZE16 ((BIT(12) * 1) | (BIT(3) * 1))
+#define PLX_DMPBAM_RPSIZE_MASK (BIT(12) | BIT(3))
+/* Direct Master PCI Read Mode - deassert IRDY when FIFO full */
+#define PLX_DMPBAM_RMIRDY BIT(4)
+/* Programmable Almost Full Level (bits 10, 8:5) */
+#define PLX_DMPBAM_PAFL(x) ((BIT(10) * !!((x) & 0x10)) | \
+ (BIT(5) * ((x) & 0xf)))
+#define PLX_DMPBAM_TO_PAFL(v) ((((BIT(10) & (v)) >> 1) | \
+ (GENMASK(8, 5) & (v))) >> 5)
+#define PLX_DMPBAM_PAFL_MASK (BIT(10) | GENMASK(8, 5))
+/* Write And Invalidate Mode */
+#define PLX_DMPBAM_WIM BIT(9)
+/* Direct Master Prefetch Limit */
+#define PLX_DBPBAM_PFLIMIT BIT(11)
+/* I/O Remap Select */
+#define PLX_DMPBAM_IOREMAPSEL BIT(13)
+/* Direct Master Write Delay */
+#define PLX_DMPBAM_WDELAYNONE (BIT(14) * 0)
+#define PLX_DMPBAM_WDELAY4 (BIT(14) * 1)
+#define PLX_DMPBAM_WDELAY8 (BIT(14) * 2)
+#define PLX_DMPBAM_WDELAY16 (BIT(14) * 3)
+#define PLX_DMPBAM_WDELAY_MASK GENMASK(15, 14)
+/* Remap of Local-to-PCI Space Into PCI Address Space */
+#define PLX_DMPBAM_REMAP_MASK GENMASK(31, 16)
/* PCI Configuration Address Register for Direct Master to PCI IO/CFG */
#define PLX_REG_DMCFGA 0x002c
--
2.8.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
