Rename the macros that define values for the trigger control register to
avoid CamelCase, and to make it clearer which register they are
associated with.
Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx>
Reviewed-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
---
v2: Shortened prefix from `DAQBOARD2000_` to `DB2K_`.
v3, v4: No change.
---
drivers/staging/comedi/drivers/daqboard2000.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c
index d56bf20..e9efdbc 100644
--- a/drivers/staging/comedi/drivers/daqboard2000.c
+++ b/drivers/staging/comedi/drivers/daqboard2000.c
@@ -232,16 +232,16 @@ static const struct comedi_lrange range_daqboard2000_ai = {
#define DB2K_DAC_CONTROL_PATTERN_ENABLE 0x0061
/* Trigger Control */
-#define DAQBOARD2000_TrigAnalog 0x0000
-#define DAQBOARD2000_TrigTTL 0x0010
-#define DAQBOARD2000_TrigTransHiLo 0x0004
-#define DAQBOARD2000_TrigTransLoHi 0x0000
-#define DAQBOARD2000_TrigAbove 0x0000
-#define DAQBOARD2000_TrigBelow 0x0004
-#define DAQBOARD2000_TrigLevelSense 0x0002
-#define DAQBOARD2000_TrigEdgeSense 0x0000
-#define DAQBOARD2000_TrigEnable 0x0001
-#define DAQBOARD2000_TrigDisable 0x0000
+#define DB2K_TRIG_CONTROL_TYPE_ANALOG 0x0000
+#define DB2K_TRIG_CONTROL_TYPE_TTL 0x0010
+#define DB2K_TRIG_CONTROL_EDGE_HI_LO 0x0004
+#define DB2K_TRIG_CONTROL_EDGE_LO_HI 0x0000
+#define DB2K_TRIG_CONTROL_LEVEL_ABOVE 0x0000
+#define DB2K_TRIG_CONTROL_LEVEL_BELOW 0x0004
+#define DB2K_TRIG_CONTROL_SENSE_LEVEL 0x0002
+#define DB2K_TRIG_CONTROL_SENSE_EDGE 0x0000
+#define DB2K_TRIG_CONTROL_ENABLE 0x0001
+#define DB2K_TRIG_CONTROL_DISABLE 0x0000
/* Reference Dac Selection */
#define DAQBOARD2000_PosRefDacSelect 0x0100
@@ -543,10 +543,10 @@ static void daqboard2000_adcDisarm(struct comedi_device *dev)
{
/* Disable hardware triggers */
udelay(2);
- writew(DAQBOARD2000_TrigAnalog | DAQBOARD2000_TrigDisable,
+ writew(DB2K_TRIG_CONTROL_TYPE_ANALOG | DB2K_TRIG_CONTROL_DISABLE,
dev->mmio + DB2K_REG_TRIG_CONTROL);
udelay(2);
- writew(DAQBOARD2000_TrigTTL | DAQBOARD2000_TrigDisable,
+ writew(DB2K_TRIG_CONTROL_TYPE_TTL | DB2K_TRIG_CONTROL_DISABLE,
dev->mmio + DB2K_REG_TRIG_CONTROL);
/* Stop the scan list FIFO from loading the configuration pipe */
--
2.8.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
