Rename the macros associated with the acquisition status register to avoid CamelCase and to make it clear which register they are associated with. Add a macro to define the offset of the read-only acquisition status register. It's the same offset as the acquisition control register, which is write-only. Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx> Reviewed-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> --- v2: Shortened prefix from `DAQBOARD2000_` to `DB2K_`. --- drivers/staging/comedi/drivers/daqboard2000.c | 39 ++++++++++++++------------- 1 file changed, 20 insertions(+), 19 deletions(-) diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c index e77a65a..271ad83 100644 --- a/drivers/staging/comedi/drivers/daqboard2000.c +++ b/drivers/staging/comedi/drivers/daqboard2000.c @@ -151,7 +151,8 @@ static const struct comedi_lrange range_daqboard2000_ai = { /* * Register Memory Map */ -#define DB2K_REG_ACQ_CONTROL 0x00 /* u16 */ +#define DB2K_REG_ACQ_CONTROL 0x00 /* u16 (w) */ +#define DB2K_REG_ACQ_STATUS 0x00 /* u16 (r) */ #define DB2K_REG_ACQ_SCAN_LIST_FIFO 0x02 /* u16 */ #define DB2K_REG_ACQ_PACER_CLOCK_DIV_LOW 0x04 /* u32 */ #define DB2K_REG_ACQ_SCAN_COUNTER 0x08 /* u16 */ @@ -190,19 +191,6 @@ static const struct comedi_lrange range_daqboard2000_ai = { #define DB2K_ACQ_CONTROL_RESET_RESULTS_FIFO 0x0002 #define DB2K_ACQ_CONTROL_RESET_CONFIG_PIPE 0x0001 -/* Acqusition status bits */ -#define DAQBOARD2000_AcqResultsFIFOMore1Sample 0x0001 -#define DAQBOARD2000_AcqResultsFIFOHasValidData 0x0002 -#define DAQBOARD2000_AcqResultsFIFOOverrun 0x0004 -#define DAQBOARD2000_AcqLogicScanning 0x0008 -#define DAQBOARD2000_AcqConfigPipeFull 0x0010 -#define DAQBOARD2000_AcqScanListFIFOEmpty 0x0020 -#define DAQBOARD2000_AcqAdcNotReady 0x0040 -#define DAQBOARD2000_ArbitrationFailure 0x0080 -#define DAQBOARD2000_AcqPacerOverrun 0x0100 -#define DAQBOARD2000_DacPacerOverrun 0x0200 -#define DAQBOARD2000_AcqHardwareError 0x01c0 - /* Pacer Clock Control */ #define DB2K_ACQ_CONTROL_ADC_PACER_INTERNAL 0x0030 #define DB2K_ACQ_CONTROL_ADC_PACER_EXTERNAL 0x0032 @@ -214,6 +202,18 @@ static const struct comedi_lrange range_daqboard2000_ai = { #define DB2K_ACQ_CONTROL_ADC_PACER_INTERNAL_OUT_ENABLE 0x0008 #define DB2K_ACQ_CONTROL_ADC_PACER_EXTERNAL_RISING 0x0100 +/* Acquisition status bits */ +#define DB2K_ACQ_STATUS_RESULTS_FIFO_MORE_1_SAMPLE 0x0001 +#define DB2K_ACQ_STATUS_RESULTS_FIFO_HAS_DATA 0x0002 +#define DB2K_ACQ_STATUS_RESULTS_FIFO_OVERRUN 0x0004 +#define DB2K_ACQ_STATUS_LOGIC_SCANNING 0x0008 +#define DB2K_ACQ_STATUS_CONFIG_PIPE_FULL 0x0010 +#define DB2K_ACQ_STATUS_SCAN_LIST_FIFO_EMPTY 0x0020 +#define DB2K_ACQ_STATUS_ADC_NOT_READY 0x0040 +#define DB2K_ACQ_STATUS_ARBITRATION_FAILURE 0x0080 +#define DB2K_ACQ_STATUS_ADC_PACER_OVERRUN 0x0100 +#define DB2K_ACQ_STATUS_DAC_PACER_OVERRUN 0x0200 + /* DAC status */ #define DAQBOARD2000_DacFull 0x0001 #define DAQBOARD2000_RefBusy 0x0002 @@ -327,7 +327,7 @@ static int daqboard2000_ai_status(struct comedi_device *dev, { unsigned int status; - status = readw(dev->mmio + DB2K_REG_ACQ_CONTROL); + status = readw(dev->mmio + DB2K_REG_ACQ_STATUS); if (status & context) return 0; return -EBUSY; @@ -371,7 +371,7 @@ static int daqboard2000_ai_insn_read(struct comedi_device *dev, dev->mmio + DB2K_REG_ACQ_CONTROL); ret = comedi_timeout(dev, s, insn, daqboard2000_ai_status, - DAQBOARD2000_AcqConfigPipeFull); + DB2K_ACQ_STATUS_CONFIG_PIPE_FULL); if (ret) return ret; @@ -379,12 +379,13 @@ static int daqboard2000_ai_insn_read(struct comedi_device *dev, dev->mmio + DB2K_REG_ACQ_CONTROL); ret = comedi_timeout(dev, s, insn, daqboard2000_ai_status, - DAQBOARD2000_AcqLogicScanning); + DB2K_ACQ_STATUS_LOGIC_SCANNING); if (ret) return ret; - ret = comedi_timeout(dev, s, insn, daqboard2000_ai_status, - DAQBOARD2000_AcqResultsFIFOHasValidData); + ret = + comedi_timeout(dev, s, insn, daqboard2000_ai_status, + DB2K_ACQ_STATUS_RESULTS_FIFO_HAS_DATA); if (ret) return ret; -- 2.8.1 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel