RE: [PATCH 06/14] staging: comedi: daqboard2000: rename register offset macros

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tuesday, May 17, 2016 2:53 AM, Ian Abbott wrote:
> Rename the macros defining register offsets to avoid CamelCase, and to
> use namespace associated with the driver.
>
> Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx>
> ---
> Other CamelCase issues in this patch will be dealt with by later
> patches in the series.
> ---
>  drivers/staging/comedi/drivers/daqboard2000.c | 112 ++++++++++++++------------
>  1 file changed, 61 insertions(+), 51 deletions(-)
>
> diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c
> index b3b68e8..92ff8f4 100644
> --- a/drivers/staging/comedi/drivers/daqboard2000.c
> +++ b/drivers/staging/comedi/drivers/daqboard2000.c
> @@ -151,35 +151,35 @@ static const struct comedi_lrange range_daqboard2000_ai = {
>  /*
>   * Register Memory Map
>   */
> -#define acqControl			0x00		/* u16 */
> -#define acqScanListFIFO			0x02		/* u16 */
> -#define acqPacerClockDivLow		0x04		/* u32 */
> -#define acqScanCounter			0x08		/* u16 */
> -#define acqPacerClockDivHigh		0x0a		/* u16 */
> -#define acqTriggerCount			0x0c		/* u16 */
> -#define acqResultsFIFO			0x10		/* u16 */
> -#define acqResultsShadow		0x14		/* u16 */
> -#define acqAdcResult			0x18		/* u16 */
> -#define dacScanCounter			0x1c		/* u16 */
> -#define dacControl			0x20		/* u16 */
> -#define dacFIFO				0x24		/* s16 */
> -#define dacPacerClockDiv		0x2a		/* u16 */
> -#define refDacs				0x2c		/* u16 */
> -#define dioControl			0x30		/* u16 */
> -#define dioP3hsioData			0x32		/* s16 */
> -#define dioP3Control			0x34		/* u16 */
> -#define calEepromControl		0x36		/* u16 */
> -#define dacSetting(x)			(0x38 + (x) * 2) /* s16 */
> -#define dioP2ExpansionIO8Bit		0x40		/* s16 */
> -#define ctrTmrControl			0x80		/* u16 */
> -#define ctrInput(x)			(0x88 + (x) * 2) /* s16 */
> -#define timerDivisor(x)			(0xa0 + (x) * 2) /* u16 */
> -#define dmaControl			0xb0		/* u16 */
> -#define trigControl			0xb2		/* u16 */
> -#define calEeprom			0xb8		/* u16 */
> -#define acqDigitalMark			0xba		/* u16 */
> -#define trigDacs			0xbc		/* u16 */
> -#define dioP2ExpansionIO16Bit(x)	(0xc0 + (x) * 2) /* s16 */
> +#define DAQBOARD2000_REG_ACQ_CONTROL			0x00 /* u16 */
> +#define DAQBOARD2000_REG_ACQ_SCAN_LIST_FIFO		0x02 /* u16 */
> +#define DAQBOARD2000_REG_ACQ_PACER_CLOCK_DIV_LOW	0x04 /* u32 */
> +#define DAQBOARD2000_REG_ACQ_SCAN_COUNTER		0x08 /* u16 */
> +#define DAQBOARD2000_REG_ACQ_PACER_CLOCK_DIV_HIGH	0x0a /* u16 */
> +#define DAQBOARD2000_REG_ACQ_TRIGGER_COUNT		0x0c /* u16 */
> +#define DAQBOARD2000_REG_ACQ_RESULTS_FIFO		0x10 /* u16 */
> +#define DAQBOARD2000_REG_ACQ_RESULTS_SHADOW		0x14 /* u16 */
> +#define DAQBOARD2000_REG_ACQ_ADC_RESULT			0x18 /* u16 */
> +#define DAQBOARD2000_REG_DAC_SCAN_COUNTER		0x1c /* u16 */
> +#define DAQBOARD2000_REG_DAC_CONTROL			0x20 /* u16 */
> +#define DAQBOARD2000_REG_DAC_FIFO			0x24 /* s16 */
> +#define DAQBOARD2000_REG_DAC_PACER_CLOCK_DIV		0x2a /* u16 */
> +#define DAQBOARD2000_REG_REF_DACS			0x2c /* u16 */
> +#define DAQBOARD2000_REG_DIO_CONTROL			0x30 /* u16 */
> +#define DAQBOARD2000_REG_P3_HSIO_DATA			0x32 /* s16 */
> +#define DAQBOARD2000_REG_P3_CONTROL			0x34 /* u16 */
> +#define DAQBOARD2000_REG_CAL_EEPROM_CONTROL		0x36 /* u16 */
> +#define DAQBOARD2000_REG_DAC_SETTING(x)		(0x38 + (x) * 2) /* s16 */
> +#define DAQBOARD2000_REG_DIO_P2_EXP_IO_8_BIT		0x40 /* s16 */
> +#define DAQBOARD2000_REG_COUNTER_TIMER_CONTROL		0x80 /* u16 */
> +#define DAQBOARD2000_REG_COUNTER_INPUT(x)	(0x88 + (x) * 2) /* s16 */
> +#define DAQBOARD2000_REG_TIMER_DIV(x)		(0xa0 + (x) * 2) /* u16 */
> +#define DAQBOARD2000_REG_DMA_CONTROL			0xb0 /* u16 */
> +#define DAQBOARD2000_REG_TRIG_CONTROL			0xb2 /* u16 */
> +#define DAQBOARD2000_REG_CAL_EEPROM			0xb8 /* u16 */
> +#define DAQBOARD2000_REG_ACQ_DIGITAL_MARK		0xba /* u16 */
> +#define DAQBOARD2000_REG_TRIG_DACS			0xbc /* u16 */
> +#define DAQBOARD2000_REG_DIO_P2_EXP_IO_16_BIT(x) (0xc0 + (x) * 2) /* s16 */

Any chance we can shorten the namespace prefix? It's not a big deal but
the DAQBOARD2000_ is pretty long. How about DB2K_ or even D2K_?

Regards,
Hartley

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux