Fix the checkpatch.pl issue: WARNING: Block comments use * on subsequent lines Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> Cc: Ian Abbott <abbotti@xxxxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/staging/comedi/drivers/dt2811.c | 78 ++++++++++++++++----------------- 1 file changed, 39 insertions(+), 39 deletions(-) diff --git a/drivers/staging/comedi/drivers/dt2811.c b/drivers/staging/comedi/drivers/dt2811.c index a807732..499637b 100644 --- a/drivers/staging/comedi/drivers/dt2811.c +++ b/drivers/staging/comedi/drivers/dt2811.c @@ -1,45 +1,45 @@ /* - comedi/drivers/dt2811.c - Hardware driver for Data Translation DT2811 - - COMEDI - Linux Control and Measurement Device Interface - History: - Base Version - David A. Schleef <ds@xxxxxxxxxxx> - December 1998 - Updated to work. David does not have a DT2811 - board any longer so this was suffering from bitrot. - Updated performed by ... - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. + * Comedi driver for Data Translation DT2811 + * + * COMEDI - Linux Control and Measurement Device Interface + * History: + * Base Version - David A. Schleef <ds@xxxxxxxxxxx> + * December 1998 - Updated to work. David does not have a DT2811 + * board any longer so this was suffering from bitrot. + * Updated performed by ... + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. */ + /* -Driver: dt2811 -Description: Data Translation DT2811 -Author: ds -Devices: [Data Translation] DT2811-PGL (dt2811-pgl), DT2811-PGH (dt2811-pgh) -Status: works - -Configuration options: - [0] - I/O port base address - [1] - IRQ, although this is currently unused - [2] - A/D reference - 0 = signle-ended - 1 = differential - 2 = pseudo-differential (common reference) - [3] - A/D range - 0 = [-5, 5] - 1 = [-2.5, 2.5] - 2 = [0, 5] - [4] - D/A 0 range (same choices) - [4] - D/A 1 range (same choices) -*/ + * Driver: dt2811 + * Description: Data Translation DT2811 + * Author: ds + * Devices: [Data Translation] DT2811-PGL (dt2811-pgl), DT2811-PGH (dt2811-pgh) + * Status: works + * + * Configuration options: + * [0] - I/O port base address + * [1] - IRQ, although this is currently unused + * [2] - A/D reference + * 0 = single-ended + * 1 = differential + * 2 = pseudo-differential (common reference) + * [3] - A/D range + * 0 = [-5, 5] + * 1 = [-2.5, 2.5] + * 2 = [0, 5] + * [4] - D/A 0 range (same as A/D range) + * [5] - D/A 1 range (same as A/D range) + */ #include <linux/module.h> #include "../comedidev.h" -- 2.6.3 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
