[PATCH 13/19] staging: comedi: ni_mio_common: tidy up AO scan begin

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The (*do_cmdtest) validates that the cmd->scan_begin_src will only be
TRIG_TIMER or TRIG_EXT. Refactor ni_ao_cmd_set_update() and remove the
BUG() which can never occur.

Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/staging/comedi/drivers/ni_mio_common.c | 39 ++++++++++----------------
 1 file changed, 15 insertions(+), 24 deletions(-)

diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
index c033fa7..3a026cc 100644
--- a/drivers/staging/comedi/drivers/ni_mio_common.c
+++ b/drivers/staging/comedi/drivers/ni_mio_common.c
@@ -3099,8 +3099,9 @@ static void ni_ao_cmd_set_update(struct comedi_device *dev,
 	  NISTC_AO_MODE1_UPDATE_SRC_POLARITY
 	);
 
-	switch (cmd->scan_begin_src) {
-	case TRIG_TIMER:
+	if (cmd->scan_begin_src == TRIG_TIMER) {
+		unsigned int trigvar;
+
 		devpriv->ao_cmd2  &= ~NISTC_AO_CMD2_BC_GATE_ENA;
 
 		/*
@@ -3131,35 +3132,25 @@ static void ni_ao_cmd_set_update(struct comedi_device *dev,
 		 * eseries/ni67xx and tMSeries.h for mseries.
 		 */
 
-		{
-			unsigned int trigvar;
-
-			trigvar = ni_ns_to_timer(dev, cmd->scan_begin_arg,
-						 CMDF_ROUND_NEAREST);
+		trigvar = ni_ns_to_timer(dev, cmd->scan_begin_arg,
+					 CMDF_ROUND_NEAREST);
 
-			/*
-			 * Wait N TB3 ticks after the start trigger before
-			 * clocking(N must be >=2).
-			 */
-			/* following line: 2-1 per STC */
-			ni_stc_writel(dev, 1,           NISTC_AO_UI_LOADA_REG);
-			ni_stc_writew(dev, NISTC_AO_CMD1_UI_LOAD,
-				      NISTC_AO_CMD1_REG);
-			/* following line: N-1 per STC */
-			ni_stc_writel(dev, trigvar - 1, NISTC_AO_UI_LOADA_REG);
-		}
-		break;
-	case TRIG_EXT:
+		/*
+		 * Wait N TB3 ticks after the start trigger before
+		 * clocking (N must be >=2).
+		 */
+		/* following line: 2-1 per STC */
+		ni_stc_writel(dev, 1, NISTC_AO_UI_LOADA_REG);
+		ni_stc_writew(dev, NISTC_AO_CMD1_UI_LOAD, NISTC_AO_CMD1_REG);
+		/* following line: N-1 per STC */
+		ni_stc_writel(dev, trigvar - 1, NISTC_AO_UI_LOADA_REG);
+	} else { /* TRIG_EXT */
 		/* FIXME:  assert scan_begin_arg != 0, ret failure otherwise */
 		devpriv->ao_cmd2  |= NISTC_AO_CMD2_BC_GATE_ENA;
 		devpriv->ao_mode1 |= NISTC_AO_MODE1_UPDATE_SRC(
 					CR_CHAN(cmd->scan_begin_arg));
 		if (cmd->scan_begin_arg & CR_INVERT)
 			devpriv->ao_mode1 |= NISTC_AO_MODE1_UPDATE_SRC_POLARITY;
-		break;
-	default:
-		BUG();
-		break;
 	}
 
 	ni_stc_writew(dev, devpriv->ao_cmd2, NISTC_AO_CMD2_REG);
-- 
2.6.3

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux