From: Mohammed Billoo <mohammed.billoo@xxxxxxxxx>
Files in wilc1000 were modified to ensure that comments
adhere to standard specified by Documentation/CodingStyle
Signed-off-by: Mohammed Billoo <mohammed.billoo@xxxxxxxxx>
---
drivers/staging/wilc1000/host_interface.c | 6 +-
drivers/staging/wilc1000/linux_mon.c | 19 ++-
drivers/staging/wilc1000/wilc_debugfs.c | 12 +-
drivers/staging/wilc1000/wilc_sdio.c | 145 +++++------------
drivers/staging/wilc1000/wilc_spi.c | 220 +++++++++-----------------
drivers/staging/wilc1000/wilc_wfi_netdevice.h | 4 +-
drivers/staging/wilc1000/wilc_wlan.h | 89 ++++-------
drivers/staging/wilc1000/wilc_wlan_cfg.c | 46 ++----
drivers/staging/wilc1000/wilc_wlan_cfg.h | 13 +-
drivers/staging/wilc1000/wilc_wlan_if.h | 44 ++----
10 files changed, 194 insertions(+), 404 deletions(-)
diff --git a/drivers/staging/wilc1000/host_interface.c b/drivers/staging/wilc1000/host_interface.c
index 0a922c7..b40dce2 100644
--- a/drivers/staging/wilc1000/host_interface.c
+++ b/drivers/staging/wilc1000/host_interface.c
@@ -263,7 +263,8 @@ static struct wilc_vif *join_req_vif;
static void *host_int_ParseJoinBssParam(struct network_info *ptstrNetworkInfo);
static int host_int_get_ipaddress(struct wilc_vif *vif, u8 *ip_addr, u8 idx);
-/* The u8IfIdx starts from 0 to NUM_CONCURRENT_IFC -1, but 0 index used as
+/*
+ * The u8IfIdx starts from 0 to NUM_CONCURRENT_IFC -1, but 0 index used as
* special purpose in wilc device, so we add 1 to the index to starts from 1.
* As a result, the returned index will be 1 to NUM_CONCURRENT_IFC.
*/
@@ -272,7 +273,8 @@ int wilc_get_vif_idx(struct wilc_vif *vif)
return vif->idx + 1;
}
-/* We need to minus 1 from idx which is from wilc device to get real index
+/*
+ * We need to minus 1 from idx which is from wilc device to get real index
* of wilc->vif[], because we add 1 when pass to wilc device in the function
* wilc_get_vif_idx.
* As a result, the index should be between 0 and NUM_CONCURRENT_IFC -1.
diff --git a/drivers/staging/wilc1000/linux_mon.c b/drivers/staging/wilc1000/linux_mon.c
index 7d9e5de..d8d4be6 100644
--- a/drivers/staging/wilc1000/linux_mon.c
+++ b/drivers/staging/wilc1000/linux_mon.c
@@ -60,8 +60,10 @@ void WILC_WFI_monitor_rx(u8 *buff, u32 size)
/* Get WILC header */
memcpy(&header, (buff - HOST_HDR_OFFSET), HOST_HDR_OFFSET);
- /* The packet offset field conain info about what type of managment frame */
- /* we are dealing with and ack status */
+ /*
+ * The packet offset field conain info about what type of managment
+ * frame we are dealing with and ack status
+ */
pkt_offset = GET_PKT_OFFSET(header);
if (pkt_offset & IS_MANAGMEMENT_CALLBACK) {
@@ -128,7 +130,10 @@ static void mgmt_tx_complete(void *priv, int status)
{
struct tx_complete_mon_data *pv_data = priv;
- /* incase of fully hosting mode, the freeing will be done in response to the cfg packet */
+ /*
+ * In case of fully hosting mode, the freeing will be done in response
+ * to the cfg packet
+ */
kfree(pv_data->buff);
kfree(pv_data);
@@ -227,8 +232,10 @@ static netdev_tx_t WILC_WFI_mon_xmit(struct sk_buff *skb,
/* Identify if Ethernet or MAC header (data or mgmt) */
memcpy(srcAdd, &skb->data[10], 6);
memcpy(bssid, &skb->data[16], 6);
- /* if source address and bssid fields are equal>>Mac header */
- /*send it to mgmt frames handler */
+ /*
+ * If source address and bssid fields are equal>>Mac header
+ * send it to mgmt frames handler
+ */
if (!(memcmp(srcAdd, bssid, 6))) {
ret = mon_mgmt_tx(mon_priv->real_ndev, skb->data, skb->len);
if (ret)
@@ -260,7 +267,7 @@ struct net_device *WILC_WFI_init_mon_interface(const char *name, struct net_devi
u32 ret = 0;
struct WILC_WFI_mon_priv *priv;
- /*If monitor interface is already initialized, return it*/
+ /* If monitor interface is already initialized, return it*/
if (wilc_wfi_mon)
return wilc_wfi_mon;
diff --git a/drivers/staging/wilc1000/wilc_debugfs.c b/drivers/staging/wilc1000/wilc_debugfs.c
index fcbc95d..4fb819d 100644
--- a/drivers/staging/wilc1000/wilc_debugfs.c
+++ b/drivers/staging/wilc1000/wilc_debugfs.c
@@ -6,7 +6,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
*/
#if defined(WILC_DEBUGFS)
@@ -20,9 +19,7 @@
static struct dentry *wilc_dir;
-/*
- * --------------------------------------------------------------------------------
- */
+
#define DEBUG BIT(0)
#define INFO BIT(1)
#define WRN BIT(2)
@@ -32,10 +29,6 @@ static struct dentry *wilc_dir;
atomic_t WILC_DEBUG_LEVEL = ATOMIC_INIT(ERR);
EXPORT_SYMBOL_GPL(WILC_DEBUG_LEVEL);
-/*
- * --------------------------------------------------------------------------------
- */
-
static ssize_t wilc_debug_level_read(struct file *file, char __user *userbuf, size_t count, loff_t *ppos)
{
@@ -76,9 +69,6 @@ static ssize_t wilc_debug_level_write(struct file *filp, const char __user *buf,
return count;
}
-/*
- * --------------------------------------------------------------------------------
- */
#define FOPS(_open, _read, _write, _poll) { \
.owner = THIS_MODULE, \
diff --git a/drivers/staging/wilc1000/wilc_sdio.c b/drivers/staging/wilc1000/wilc_sdio.c
index a839a79..6ae3490 100644
--- a/drivers/staging/wilc1000/wilc_sdio.c
+++ b/drivers/staging/wilc1000/wilc_sdio.c
@@ -1,11 +1,8 @@
-/* ////////////////////////////////////////////////////////////////////////// */
-/* */
-/* Copyright (c) Atmel Corporation. All rights reserved. */
-/* */
-/* Module Name: wilc_sdio.c */
-/* */
-/* */
-/* //////////////////////////////////////////////////////////////////////////// */
+/*
+ * Copyright (c) Atmel Corporation. All rights reserved.
+ *
+ * Module Name: wilc_sdio.c
+ */
#include <linux/string.h>
#include "wilc_wlan_if.h"
@@ -334,11 +331,6 @@ _fail_:
return 0;
}
-/********************************************
- *
- * Function 1
- *
- ********************************************/
static int sdio_set_func1_block_size(struct wilc *wilc, u32 block_size)
{
@@ -369,11 +361,7 @@ _fail_:
return 0;
}
-/********************************************
- *
- * Sdio interfaces
- *
- ********************************************/
+
static int sdio_write_reg(struct wilc *wilc, u32 addr, u32 data)
{
struct sdio_func *func = dev_to_sdio_func(wilc->dev);
@@ -436,31 +424,23 @@ static int sdio_write(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
cmd.read_write = 1;
if (addr > 0) {
- /**
- * has to be word aligned...
- **/
+ /* Has to be word aligned */
if (size & 0x3) {
size += 4;
size &= ~0x3;
}
- /**
- * func 0 access
- **/
+ /* Func 0 access */
cmd.function = 0;
cmd.address = 0x10f;
} else {
- /**
- * has to be word aligned...
- **/
+ /* Has to be word aligned */
if (size & 0x3) {
size += 4;
size &= ~0x3;
}
- /**
- * func 1 access
- **/
+ /* Func 1 access */
cmd.function = 1;
cmd.address = 0;
}
@@ -495,7 +475,8 @@ static int sdio_write(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
cmd.count = nleft;
cmd.buffer = buf;
- cmd.block_size = block_size; /* johnny : prevent it from setting unexpected value */
+ /* Johnny : Prevent it from setting unexpected value */
+ cmd.block_size = block_size;
if (addr > 0) {
if (!sdio_set_func0_csa_address(wilc, addr))
@@ -549,7 +530,8 @@ static int sdio_read_reg(struct wilc *wilc, u32 addr, u32 *data)
cmd.count = 4;
cmd.buffer = (u8 *)data;
- cmd.block_size = g_sdio.block_size; /* johnny : prevent it from setting unexpected value */
+ /* Johnny : Prevent it from setting unexpected value */
+ cmd.block_size = g_sdio.block_size;
ret = wilc_sdio_cmd53(wilc, &cmd);
if (ret) {
dev_err(&func->dev,
@@ -576,31 +558,23 @@ static int sdio_read(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
cmd.read_write = 0;
if (addr > 0) {
- /**
- * has to be word aligned...
- **/
+ /* Has to be word aligned */
if (size & 0x3) {
size += 4;
size &= ~0x3;
}
- /**
- * func 0 access
- **/
+ /* Func 0 access */
cmd.function = 0;
cmd.address = 0x10f;
} else {
- /**
- * has to be word aligned...
- **/
+ /* Has to be word aligned */
if (size & 0x3) {
size += 4;
size &= ~0x3;
}
- /**
- * func 1 access
- **/
+ /* Func 1 access */
cmd.function = 1;
cmd.address = 0;
}
@@ -635,7 +609,8 @@ static int sdio_read(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
cmd.count = nleft;
cmd.buffer = buf;
- cmd.block_size = block_size; /* johnny : prevent it from setting unexpected value */
+ /* Johnny : Prevent it from setting unexpected value */
+ cmd.block_size = block_size;
if (addr > 0) {
if (!sdio_set_func0_csa_address(wilc, addr))
@@ -656,11 +631,6 @@ _fail_:
return 0;
}
-/********************************************
- *
- * Bus interfaces
- *
- ********************************************/
static int sdio_deinit(struct wilc *wilc)
{
@@ -679,9 +649,7 @@ static int sdio_init(struct wilc *wilc, bool resume)
g_sdio.irq_gpio = wilc->dev_irq_num;
}
- /**
- * function 0 csa enable
- **/
+ /* Function 0 csa enable */
cmd.read_write = 1;
cmd.function = 0;
cmd.raw = 1;
@@ -693,18 +661,14 @@ static int sdio_init(struct wilc *wilc, bool resume)
goto _fail_;
}
- /**
- * function 0 block size
- **/
+ /* Function 0 block size */
if (!sdio_set_func0_block_size(wilc, WILC_SDIO_BLOCK_SIZE)) {
dev_err(&func->dev, "Fail cmd 52, set func 0 block size...\n");
goto _fail_;
}
g_sdio.block_size = WILC_SDIO_BLOCK_SIZE;
- /**
- * enable func1 IO
- **/
+ /* Enable func1 IO */
cmd.read_write = 1;
cmd.function = 0;
cmd.raw = 1;
@@ -717,9 +681,7 @@ static int sdio_init(struct wilc *wilc, bool resume)
goto _fail_;
}
- /**
- * make sure func 1 is up
- **/
+ /* Make sure func 1 is up */
cmd.read_write = 0;
cmd.function = 0;
cmd.raw = 0;
@@ -742,17 +704,13 @@ static int sdio_init(struct wilc *wilc, bool resume)
goto _fail_;
}
- /**
- * func 1 is ready, set func 1 block size
- **/
+ /* Func 1 is ready, set func 1 block size */
if (!sdio_set_func1_block_size(wilc, WILC_SDIO_BLOCK_SIZE)) {
dev_err(&func->dev, "Fail set func 1 block size...\n");
goto _fail_;
}
- /**
- * func 1 interrupt enable
- **/
+ /* Func 1 interrupt enable */
cmd.read_write = 1;
cmd.function = 0;
cmd.raw = 1;
@@ -764,9 +722,7 @@ static int sdio_init(struct wilc *wilc, bool resume)
goto _fail_;
}
- /**
- * make sure can read back chip id correctly
- **/
+ /* Make sure can read back chip id correctly */
if (!resume) {
if (!sdio_read_reg(wilc, 0x1000, &chipid)) {
dev_err(&func->dev, "Fail cmd read chip id...\n");
@@ -793,9 +749,7 @@ static int sdio_read_size(struct wilc *wilc, u32 *size)
u32 tmp;
struct sdio_cmd52 cmd;
- /**
- * Read DMA count in words
- **/
+ /* Read DMA count in words */
cmd.read_write = 0;
cmd.function = 0;
cmd.raw = 0;
@@ -804,9 +758,6 @@ static int sdio_read_size(struct wilc *wilc, u32 *size)
wilc_sdio_cmd52(wilc, &cmd);
tmp = cmd.data;
- /* cmd.read_write = 0; */
- /* cmd.function = 0; */
- /* cmd.raw = 0; */
cmd.address = 0xf3;
cmd.data = 0;
wilc_sdio_cmd52(wilc, &cmd);
@@ -824,9 +775,7 @@ static int sdio_read_int(struct wilc *wilc, u32 *int_status)
sdio_read_size(wilc, &tmp);
- /**
- * Read IRQ flags
- **/
+ /* Read IRQ flags */
if (!g_sdio.irq_gpio) {
int i;
@@ -889,13 +838,13 @@ static int sdio_clear_int_ext(struct wilc *wilc, u32 val)
} else {
reg = 0;
}
- /* select VMM table 0 */
+ /* Select VMM table 0 */
if ((val & SEL_VMM_TBL0) == SEL_VMM_TBL0)
reg |= BIT(5);
- /* select VMM table 1 */
+ /* Select VMM table 1 */
if ((val & SEL_VMM_TBL1) == SEL_VMM_TBL1)
reg |= BIT(6);
- /* enable VMM */
+ /* Enable VMM */
if ((val & EN_VMM) == EN_VMM)
reg |= BIT(7);
if (reg) {
@@ -918,8 +867,11 @@ static int sdio_clear_int_ext(struct wilc *wilc, u32 val)
}
} else {
if (g_sdio.irq_gpio) {
- /* see below. has_thrpt_enh2 uses register 0xf8 to clear interrupts. */
- /* Cannot clear multiple interrupts. Must clear each interrupt individually */
+ /*
+ * See below. has_thrpt_enh2 uses register 0xf8 to
+ * clear interrupts. Cannot clear multiple interrupts.
+ * Must clear each interrupt individually
+ */
u32 flags;
flags = val & (BIT(MAX_NUM_INT) - 1);
@@ -966,13 +918,13 @@ static int sdio_clear_int_ext(struct wilc *wilc, u32 val)
u32 vmm_ctl;
vmm_ctl = 0;
- /* select VMM table 0 */
+ /* Select VMM table 0 */
if ((val & SEL_VMM_TBL0) == SEL_VMM_TBL0)
vmm_ctl |= BIT(0);
- /* select VMM table 1 */
+ /* Select VMM table 1 */
if ((val & SEL_VMM_TBL1) == SEL_VMM_TBL1)
vmm_ctl |= BIT(1);
- /* enable VMM */
+ /* Enable VMM */
if ((val & EN_VMM) == EN_VMM)
vmm_ctl |= BIT(2);
@@ -1017,9 +969,7 @@ static int sdio_sync_ext(struct wilc *wilc, int nint)
g_sdio.nint = nint;
- /**
- * Disable power sequencer
- **/
+ /* Disable power sequencer */
if (!sdio_read_reg(wilc, WILC_MISC, ®)) {
dev_err(&func->dev, "Failed read misc reg...\n");
return 0;
@@ -1035,9 +985,7 @@ static int sdio_sync_ext(struct wilc *wilc, int nint)
u32 reg;
int ret, i;
- /**
- * interrupt pin mux select
- **/
+ /* Interrupt pin mux select */
ret = sdio_read_reg(wilc, WILC_PIN_MUX_0, ®);
if (!ret) {
dev_err(&func->dev, "Failed read reg (%08x)...\n",
@@ -1052,9 +1000,7 @@ static int sdio_sync_ext(struct wilc *wilc, int nint)
return 0;
}
- /**
- * interrupt enable
- **/
+ /* Interrupt enable */
ret = sdio_read_reg(wilc, WILC_INTR_ENABLE, ®);
if (!ret) {
dev_err(&func->dev, "Failed read reg (%08x)...\n",
@@ -1094,11 +1040,6 @@ static int sdio_sync_ext(struct wilc *wilc, int nint)
return 1;
}
-/********************************************
- *
- * Global sdio HIF function table
- *
- ********************************************/
const struct wilc_hif_func wilc_hif_sdio = {
.hif_init = sdio_init,
diff --git a/drivers/staging/wilc1000/wilc_spi.c b/drivers/staging/wilc1000/wilc_spi.c
index d41b8b6..5328c3e 100644
--- a/drivers/staging/wilc1000/wilc_spi.c
+++ b/drivers/staging/wilc1000/wilc_spi.c
@@ -1,11 +1,8 @@
-/* ////////////////////////////////////////////////////////////////////////// */
-/* */
-/* Copyright (c) Atmel Corporation. All rights reserved. */
-/* */
-/* Module Name: wilc_spi.c */
-/* */
-/* */
-/* //////////////////////////////////////////////////////////////////////////// */
+/*
+ * Copyright (c) Atmel Corporation. All rights reserved.
+ *
+ * Module Name: wilc_spi.c
+ */
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -34,11 +31,6 @@ static struct wilc_spi g_spi;
static int wilc_spi_read(struct wilc *wilc, u32, u8 *, u32);
static int wilc_spi_write(struct wilc *wilc, u32, u8 *, u32);
-/********************************************
- *
- * Crc7
- *
- ********************************************/
static const u8 crc7_syndrome_table[256] = {
0x00, 0x09, 0x12, 0x1b, 0x24, 0x2d, 0x36, 0x3f,
@@ -87,11 +79,6 @@ static u8 crc7(u8 crc, const u8 *buffer, u32 len)
return crc;
}
-/********************************************
- *
- * Spi protocol Function
- *
- ********************************************/
#define CMD_DMA_WRITE 0xc1
#define CMD_DMA_READ 0xc2
@@ -293,14 +280,14 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
wb[0] = cmd;
switch (cmd) {
- case CMD_SINGLE_READ: /* single word (4 bytes) read */
+ case CMD_SINGLE_READ: /* Single word (4 bytes) read */
wb[1] = (u8)(adr >> 16);
wb[2] = (u8)(adr >> 8);
wb[3] = (u8)adr;
len = 5;
break;
- case CMD_INTERNAL_READ: /* internal register read */
+ case CMD_INTERNAL_READ: /* Internal register read */
wb[1] = (u8)(adr >> 8);
if (clockless == 1)
wb[1] |= BIT(7);
@@ -309,29 +296,29 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
len = 5;
break;
- case CMD_TERMINATE: /* termination */
+ case CMD_TERMINATE: /* Termination */
wb[1] = 0x00;
wb[2] = 0x00;
wb[3] = 0x00;
len = 5;
break;
- case CMD_REPEAT: /* repeat */
+ case CMD_REPEAT: /* Repeat */
wb[1] = 0x00;
wb[2] = 0x00;
wb[3] = 0x00;
len = 5;
break;
- case CMD_RESET: /* reset */
+ case CMD_RESET: /* Reset */
wb[1] = 0xff;
wb[2] = 0xff;
wb[3] = 0xff;
len = 5;
break;
- case CMD_DMA_WRITE: /* dma write */
- case CMD_DMA_READ: /* dma read */
+ case CMD_DMA_WRITE: /* Dma write */
+ case CMD_DMA_READ: /* Dma read */
wb[1] = (u8)(adr >> 16);
wb[2] = (u8)(adr >> 8);
wb[3] = (u8)adr;
@@ -340,8 +327,8 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
len = 7;
break;
- case CMD_DMA_EXT_WRITE: /* dma extended write */
- case CMD_DMA_EXT_READ: /* dma extended read */
+ case CMD_DMA_EXT_WRITE: /* Dma extended write */
+ case CMD_DMA_EXT_READ: /* Dma extended read */
wb[1] = (u8)(adr >> 16);
wb[2] = (u8)(adr >> 8);
wb[3] = (u8)adr;
@@ -351,7 +338,7 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
len = 8;
break;
- case CMD_INTERNAL_WRITE: /* internal register write */
+ case CMD_INTERNAL_WRITE: /* Internal register write */
wb[1] = (u8)(adr >> 8);
if (clockless == 1)
wb[1] |= BIT(7);
@@ -363,7 +350,7 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
len = 8;
break;
- case CMD_SINGLE_WRITE: /* single word write */
+ case CMD_SINGLE_WRITE: /* Single word write */
wb[1] = (u8)(adr >> 16);
wb[2] = (u8)(adr >> 8);
wb[3] = (u8)(adr);
@@ -416,7 +403,7 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
result = N_FAIL;
return result;
}
- /* zero spi write buffers. */
+ /* Zero spi write buffers. */
for (wix = len; wix < len2; wix++)
wb[wix] = 0;
rix = len;
@@ -427,19 +414,11 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
return result;
}
- /**
- * Command/Control response
- **/
- if ((cmd == CMD_RESET) ||
- (cmd == CMD_TERMINATE) ||
- (cmd == CMD_REPEAT)) {
- rix++; /* skip 1 byte */
- }
+ /* Command/Control response */
+ if ((cmd == CMD_RESET) || (cmd == CMD_TERMINATE) || (cmd == CMD_REPEAT))
+ rix++; /* skip 1 byte */
- /* do { */
rsp = rb[rix++];
- /* if(rsp == cmd) break; */
- /* } while(&rptr[1] <= &rb[len2]); */
if (rsp != cmd) {
dev_err(&spi->dev,
@@ -449,9 +428,7 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
return result;
}
- /**
- * State response
- **/
+ /* State response */
rsp = rb[rix++];
if (rsp != 0x00) {
dev_err(&spi->dev, "Failed cmd state response state (%02x)\n",
@@ -463,14 +440,14 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
if ((cmd == CMD_INTERNAL_READ) || (cmd == CMD_SINGLE_READ)
|| (cmd == CMD_DMA_READ) || (cmd == CMD_DMA_EXT_READ)) {
int retry;
- /* u16 crc1, crc2; */
u8 crc[2];
- /**
- * Data Respnose header
- **/
+ /* Data Response header */
retry = 100;
do {
- /* ensure there is room in buffer later to read data and crc */
+ /*
+ * Ensure there is room in buffer later to read data
+ * and crc
+ */
if (rix < len2) {
rsp = rb[rix++];
} else {
@@ -489,9 +466,7 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
}
if ((cmd == CMD_INTERNAL_READ) || (cmd == CMD_SINGLE_READ)) {
- /**
- * Read bytes
- **/
+ /* Read bytes */
if ((rix + 3) < len2) {
b[0] = rb[rix++];
b[1] = rb[rix++];
@@ -505,9 +480,7 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
}
if (!g_spi.crc_off) {
- /**
- * Read Crc
- **/
+ /* Read Crc */
if ((rix + 1) < len2) {
crc[0] = rb[rix++];
crc[1] = rb[rix++];
@@ -520,7 +493,7 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
} else if ((cmd == CMD_DMA_READ) || (cmd == CMD_DMA_EXT_READ)) {
int ix;
- /* some data may be read in response to dummy bytes. */
+ /* Some data may be read in response to dummy bytes. */
for (ix = 0; (rix < len2) && (ix < sz); )
b[ix++] = rb[rix++];
@@ -534,18 +507,14 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
else
nbytes = DATA_PKT_SZ - ix;
- /**
- * Read bytes
- **/
+ /* Read bytes */
if (wilc_spi_rx(wilc, &b[ix], nbytes)) {
dev_err(&spi->dev, "Failed data block read, bus error...\n");
result = N_FAIL;
goto _error_;
}
- /**
- * Read Crc
- **/
+ /* Read Crc */
if (!g_spi.crc_off) {
if (wilc_spi_rx(wilc, crc, 2)) {
dev_err(&spi->dev, "Failed data block crc read, bus error...\n");
@@ -559,7 +528,10 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
sz -= nbytes;
}
- /* if any data in left unread, then read the rest using normal DMA code.*/
+ /*
+ * If any data in left unread, then read the rest using
+ * normal DMA code.
+ */
while (sz > 0) {
int nbytes;
@@ -568,14 +540,14 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
else
nbytes = DATA_PKT_SZ;
- /**
- * read data response only on the next DMA cycles not
- * the first DMA since data response header is already
- * handled above for the first DMA.
- **/
- /**
- * Data Respnose header
- **/
+ /*
+ * Read data response only on the next DMA
+ * cycles not the first DMA since data response
+ * header is already handled above for the first
+ * DMA.
+ */
+
+ /*Data Respnose header */
retry = 10;
do {
if (wilc_spi_rx(wilc, &rsp, 1)) {
@@ -591,18 +563,14 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
break;
- /**
- * Read bytes
- **/
+ /* Read bytes */
if (wilc_spi_rx(wilc, &b[ix], nbytes)) {
dev_err(&spi->dev, "Failed data block read, bus error...\n");
result = N_FAIL;
break;
}
- /**
- * Read Crc
- **/
+ /* Read Crc */
if (!g_spi.crc_off) {
if (wilc_spi_rx(wilc, crc, 2)) {
dev_err(&spi->dev, "Failed data block crc read, bus error...\n");
@@ -626,11 +594,8 @@ static int spi_data_write(struct wilc *wilc, u8 *b, u32 sz)
int ix, nbytes;
int result = 1;
u8 cmd, order, crc[2] = {0};
- /* u8 rsp; */
- /**
- * Data
- **/
+ /* Data*/
ix = 0;
do {
if (sz <= DATA_PKT_SZ)
@@ -638,9 +603,7 @@ static int spi_data_write(struct wilc *wilc, u8 *b, u32 sz)
else
nbytes = DATA_PKT_SZ;
- /**
- * Write command
- **/
+ /* Write command */
cmd = 0xf0;
if (ix == 0) {
if (sz <= DATA_PKT_SZ)
@@ -662,9 +625,7 @@ static int spi_data_write(struct wilc *wilc, u8 *b, u32 sz)
break;
}
- /**
- * Write data
- **/
+ /* Write data */
if (wilc_spi_tx(wilc, &b[ix], nbytes)) {
dev_err(&spi->dev,
"Failed data block write, bus error...\n");
@@ -672,9 +633,7 @@ static int spi_data_write(struct wilc *wilc, u8 *b, u32 sz)
break;
}
- /**
- * Write Crc
- **/
+ /* Write Crc */
if (!g_spi.crc_off) {
if (wilc_spi_tx(wilc, crc, 2)) {
dev_err(&spi->dev, "Failed data block crc write, bus error...\n");
@@ -683,9 +642,7 @@ static int spi_data_write(struct wilc *wilc, u8 *b, u32 sz)
}
}
- /**
- * No need to wait for response
- **/
+ /* No need to wait for response */
ix += nbytes;
sz -= nbytes;
} while (sz);
@@ -694,11 +651,6 @@ static int spi_data_write(struct wilc *wilc, u8 *b, u32 sz)
return result;
}
-/********************************************
- *
- * Spi Internal Read/Write Function
- *
- ********************************************/
static int spi_internal_write(struct wilc *wilc, u32 adr, u32 dat)
{
@@ -731,11 +683,6 @@ static int spi_internal_read(struct wilc *wilc, u32 adr, u32 *data)
return 1;
}
-/********************************************
- *
- * Spi interfaces
- *
- ********************************************/
static int wilc_spi_write_reg(struct wilc *wilc, u32 addr, u32 data)
{
@@ -746,7 +693,7 @@ static int wilc_spi_write_reg(struct wilc *wilc, u32 addr, u32 data)
data = cpu_to_le32(data);
if (addr < 0x30) {
- /* Clockless register*/
+ /* Clockless register */
cmd = CMD_INTERNAL_WRITE;
clockless = 1;
}
@@ -764,9 +711,7 @@ static int wilc_spi_write(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
int result;
u8 cmd = CMD_DMA_EXT_WRITE;
- /**
- * has to be greated than 4
- **/
+ /* Has to be greated than 4 */
if (size <= 4)
return 0;
@@ -777,9 +722,7 @@ static int wilc_spi_write(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
return 0;
}
- /**
- * Data
- **/
+ /* Data */
result = spi_data_write(wilc, buf, size);
if (result != N_OK)
dev_err(&spi->dev, "Failed block data write...\n");
@@ -795,8 +738,7 @@ static int wilc_spi_read_reg(struct wilc *wilc, u32 addr, u32 *data)
u8 clockless = 0;
if (addr < 0x30) {
- /* dev_err(&spi->dev, "***** read addr %d\n\n", addr); */
- /* Clockless register*/
+ /* Clockless register */
cmd = CMD_INTERNAL_READ;
clockless = 1;
}
@@ -830,17 +772,10 @@ static int wilc_spi_read(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
return 1;
}
-/********************************************
- *
- * Bus interfaces
- *
- ********************************************/
static int _wilc_spi_deinit(struct wilc *wilc)
{
- /**
- * TODO:
- **/
+ /* TODO: */
return 1;
}
@@ -863,16 +798,18 @@ static int wilc_spi_init(struct wilc *wilc, bool resume)
memset(&g_spi, 0, sizeof(struct wilc_spi));
- /**
- * configure protocol
- **/
+ /* Configure protocol */
g_spi.crc_off = 0;
- /* TODO: We can remove the CRC trials if there is a definite way to reset */
- /* the SPI to it's initial value. */
+ /*
+ * TODO: We can remove the CRC trials if there is a definite way to
+ * reset the SPI to it's initial value.
+ */
if (!spi_internal_read(wilc, WILC_SPI_PROTOCOL_OFFSET, ®)) {
- /* Read failed. Try with CRC off. This might happen when module
- * is removed but chip isn't reset*/
+ /*
+ * Read failed. Try with CRC off. This might happen when module
+ * is removed but chip isn't reset
+ */
g_spi.crc_off = 1;
dev_err(&spi->dev, "Failed internal read protocol with CRC on, retyring with CRC off...\n");
if (!spi_internal_read(wilc, WILC_SPI_PROTOCOL_OFFSET, ®)) {
@@ -883,7 +820,7 @@ static int wilc_spi_init(struct wilc *wilc, bool resume)
}
}
if (g_spi.crc_off == 0) {
- reg &= ~0xc; /* disable crc checking */
+ reg &= ~0xc; /* Disable crc checking */
reg &= ~0x70;
reg |= (0x5 << 4);
if (!spi_internal_write(wilc, WILC_SPI_PROTOCOL_OFFSET, reg)) {
@@ -894,14 +831,11 @@ static int wilc_spi_init(struct wilc *wilc, bool resume)
}
- /**
- * make sure can read back chip id correctly
- **/
+ /* Make sure can read back chip id correctly */
if (!wilc_spi_read_reg(wilc, 0x1000, &chipid)) {
dev_err(&spi->dev, "Fail cmd read chip id...\n");
return 0;
}
- /* dev_err(&spi->dev, "chipid (%08x)\n", chipid); */
g_spi.has_thrpt_enh = 1;
@@ -1046,10 +980,10 @@ static int wilc_spi_clear_int_ext(struct wilc *wilc, u32 val)
u32 tbl_ctl;
tbl_ctl = 0;
- /* select VMM table 0 */
+ /* Select VMM table 0 */
if ((val & SEL_VMM_TBL0) == SEL_VMM_TBL0)
tbl_ctl |= BIT(0);
- /* select VMM table 1 */
+ /* Select VMM table 1 */
if ((val & SEL_VMM_TBL1) == SEL_VMM_TBL1)
tbl_ctl |= BIT(1);
@@ -1062,9 +996,7 @@ static int wilc_spi_clear_int_ext(struct wilc *wilc, u32 val)
}
if ((val & EN_VMM) == EN_VMM) {
- /**
- * enable vmm transfer.
- **/
+ /* Enable vmm transfer. */
ret = wilc_spi_write_reg(wilc,
WILC_VMM_CORE_CTL, 1);
if (!ret) {
@@ -1091,9 +1023,7 @@ static int wilc_spi_sync_ext(struct wilc *wilc, int nint)
g_spi.nint = nint;
- /**
- * interrupt pin mux select
- **/
+ /* Interrupt pin mux select */
ret = wilc_spi_read_reg(wilc, WILC_PIN_MUX_0, ®);
if (!ret) {
dev_err(&spi->dev, "Failed read reg (%08x)...\n",
@@ -1108,9 +1038,7 @@ static int wilc_spi_sync_ext(struct wilc *wilc, int nint)
return 0;
}
- /**
- * interrupt enable
- **/
+ /* Interrupt enable */
ret = wilc_spi_read_reg(wilc, WILC_INTR_ENABLE, ®);
if (!ret) {
dev_err(&spi->dev, "Failed read reg (%08x)...\n",
@@ -1148,11 +1076,7 @@ static int wilc_spi_sync_ext(struct wilc *wilc, int nint)
return 1;
}
-/********************************************
- *
- * Global spi HIF function table
- *
- ********************************************/
+
const struct wilc_hif_func wilc_hif_spi = {
.hif_init = wilc_spi_init,
.hif_deinit = _wilc_spi_deinit,
diff --git a/drivers/staging/wilc1000/wilc_wfi_netdevice.h b/drivers/staging/wilc1000/wilc_wfi_netdevice.h
index 4123cff..3d89167 100644
--- a/drivers/staging/wilc1000/wilc_wfi_netdevice.h
+++ b/drivers/staging/wilc1000/wilc_wfi_netdevice.h
@@ -86,7 +86,7 @@ struct sta_info {
u8 au8Sta_AssociatedBss[MAX_NUM_STA][ETH_ALEN];
};
-/*Parameters needed for host interface for remaining on channel*/
+/* Parameters needed for host interface for remaining on channel */
struct wilc_wfi_p2pListenParams {
struct ieee80211_channel *pstrListenChan;
enum nl80211_channel_type tenuChannelType;
@@ -129,10 +129,8 @@ struct wilc_priv {
struct wilc_wfi_key *wilc_gtk[MAX_NUM_STA];
struct wilc_wfi_key *wilc_ptk[MAX_NUM_STA];
u8 wilc_groupkey;
- /* semaphores */
struct semaphore SemHandleUpdateStats;
struct semaphore hSemScanReq;
- /* */
bool gbAutoRateAdjusted;
bool bInP2PlistenState;
diff --git a/drivers/staging/wilc1000/wilc_wlan.h b/drivers/staging/wilc1000/wilc_wlan.h
index bcd4bfa..3d73aa3 100644
--- a/drivers/staging/wilc1000/wilc_wlan.h
+++ b/drivers/staging/wilc1000/wilc_wlan.h
@@ -5,11 +5,7 @@
#define ISWILC1000(id) ((id & 0xfffff000) == 0x100000 ? 1 : 0)
-/********************************************
- *
- * Mac eth header length
- *
- ********************************************/
+/* Mac eth header length */
#define DRIVER_HANDLER_SIZE 4
#define MAX_MAC_HDR_LEN 26 /* QOS_MAC_HDR_LEN */
#define SUB_MSDU_HEADER_LENGTH 14
@@ -35,11 +31,7 @@
#define ETH_CONFIG_PKT_HDR_OFFSET (ETH_ETHERNET_HDR_OFFSET + \
ETH_CONFIG_PKT_HDR_LEN)
-/********************************************
- *
- * Register Defines
- *
- ********************************************/
+/* Register Defines */
#define WILC_PERIPH_REG_BASE 0x1000
#define WILC_CHANGING_VIR_IF 0x108c
#define WILC_CHIPID WILC_PERIPH_REG_BASE
@@ -133,20 +125,17 @@
#define MODALIAS "WILC_SPI"
#define GPIO_NUM 0x44
-/*******************************************/
-/* E0 and later Interrupt flags. */
-/*******************************************/
-/*******************************************/
-/* E0 and later Interrupt flags. */
-/* IRQ Status word */
-/* 15:0 = DMA count in words. */
-/* 16: INT0 flag */
-/* 17: INT1 flag */
-/* 18: INT2 flag */
-/* 19: INT3 flag */
-/* 20: INT4 flag */
-/* 21: INT5 flag */
-/*******************************************/
+/*
+ * E0 and later Interrupt flags.
+ * IRQ Status word
+ * 15:0 = DMA count in words.
+ * 16: INT0 flag
+ * 17: INT1 flag
+ * 18: INT2 flag
+ * 19: INT3 flag
+ * 20: INT4 flag
+ * 21: INT5 flag
+ */
#define IRG_FLAGS_OFFSET 16
#define IRQ_DMA_WD_CNT_MASK ((1ul << IRG_FLAGS_OFFSET) - 1)
#define INT_0 BIT(IRG_FLAGS_OFFSET)
@@ -157,19 +146,19 @@
#define INT_5 BIT(IRG_FLAGS_OFFSET + 5)
#define MAX_NUM_INT 6
-/*******************************************/
-/* E0 and later Interrupt flags. */
-/* IRQ Clear word */
-/* 0: Clear INT0 */
-/* 1: Clear INT1 */
-/* 2: Clear INT2 */
-/* 3: Clear INT3 */
-/* 4: Clear INT4 */
-/* 5: Clear INT5 */
-/* 6: Select VMM table 1 */
-/* 7: Select VMM table 2 */
-/* 8: Enable VMM */
-/*******************************************/
+/*
+ * E0 and later Interrupt flags.
+ * IRQ Clear word
+ * 0: Clear INT0
+ * 1: Clear INT1
+ * 2: Clear INT2
+ * 3: Clear INT3
+ * 4: Clear INT4
+ * 5: Clear INT5
+ * 6: Select VMM table 1
+ * 7: Select VMM table 2
+ * 8: Enable VMM
+ */
#define CLR_INT0 BIT(0)
#define CLR_INT1 BIT(1)
#define CLR_INT2 BIT(2)
@@ -192,20 +181,12 @@
#define ENABLE_RX_VMM (SEL_VMM_TBL1 | EN_VMM)
#define ENABLE_TX_VMM (SEL_VMM_TBL0 | EN_VMM)
-/*time for expiring the semaphores of cfg packets*/
+/* Time for expiring the semaphores of cfg packets */
#define CFG_PKTS_TIMEOUT 2000
-/********************************************
- *
- * Debug Type
- *
- ********************************************/
+/* Debug Type */
typedef void (*wilc_debug_func)(u32, char *, ...);
-/********************************************
- *
- * Tx/Rx Queue Structure
- *
- ********************************************/
+/* Tx/Rx Queue Structure */
struct txq_entry_t {
struct txq_entry_t *next;
@@ -225,11 +206,7 @@ struct rxq_entry_t {
int buffer_size;
};
-/********************************************
- *
- * Host IF Structure
- *
- ********************************************/
+/* Host IF Structure */
struct wilc;
struct wilc_hif_func {
int (*hif_init)(struct wilc *, bool resume);
@@ -251,11 +228,7 @@ struct wilc_hif_func {
extern const struct wilc_hif_func wilc_hif_spi;
extern const struct wilc_hif_func wilc_hif_sdio;
-/********************************************
- *
- * Configuration Structure
- *
- ********************************************/
+/* Configuration Structure */
#define MAX_CFG_FRAME_SIZE 1468
diff --git a/drivers/staging/wilc1000/wilc_wlan_cfg.c b/drivers/staging/wilc1000/wilc_wlan_cfg.c
index b3425b9..f4c643c 100644
--- a/drivers/staging/wilc1000/wilc_wlan_cfg.c
+++ b/drivers/staging/wilc1000/wilc_wlan_cfg.c
@@ -1,11 +1,8 @@
-/* ////////////////////////////////////////////////////////////////////////// */
-/* */
-/* Copyright (c) Atmel Corporation. All rights reserved. */
-/* */
-/* Module Name: wilc_wlan_cfg.c */
-/* */
-/* */
-/* ///////////////////////////////////////////////////////////////////////// */
+/*
+ * Copyright (c) Atmel Corporation. All rights reserved.
+ *
+ * Module Name: wilc_wlan_cfg.c
+ */
#include <linux/string.h>
#include "wilc_wlan_if.h"
@@ -13,11 +10,7 @@
#include "wilc_wlan_cfg.h"
#include "coreconfigurator.h"
-/********************************************
- *
- * Global Data
- *
- ********************************************/
+/* Global Data */
enum cfg_cmd_type {
CFG_BYTE_CMD = 0,
CFG_HWORD_CMD = 1,
@@ -157,11 +150,7 @@ static struct wilc_cfg_str g_cfg_str[] = {
{WID_NIL, NULL}
};
-/********************************************
- *
- * Configuration Functions
- *
- ********************************************/
+/* Configuration Functions */
static int wilc_wlan_cfg_set_byte(u8 *frame, u32 offset, u16 id, u8 val8)
{
@@ -263,11 +252,7 @@ static int wilc_wlan_cfg_set_bin(u8 *frame, u32 offset, u16 id, u8 *b, u32 size)
return (size + 5);
}
-/********************************************
- *
- * Configuration Response Functions
- *
- ********************************************/
+/* Configuration Response Functions */
static void wilc_wlan_parse_response_frame(u8 *info, int size)
{
@@ -367,11 +352,7 @@ static int wilc_wlan_parse_info_frame(u8 *info, int size)
return type;
}
-/********************************************
- *
- * Configuration Exported Functions
- *
- ********************************************/
+/* Configuration Exported Functions */
int wilc_wlan_cfg_set_wid(u8 *frame, u32 offset, u16 id, u8 *buf, int size)
{
@@ -506,13 +487,14 @@ int wilc_wlan_cfg_indicate_rx(struct wilc *wilc, u8 *frame, int size,
u8 msg_id;
msg_type = frame[0];
- msg_id = frame[1]; /* seq no */
+ msg_id = frame[1]; /* Seq no */
frame += 4;
size -= 4;
- /**
- * The valid types of response messages are 'R' (Response), 'I' (Information), and 'N' (Network Information)
- **/
+ /*
+ * The valid types of response messages are 'R' (Response),
+ * 'I' (Information), and 'N' (Network Information)
+ */
switch (msg_type) {
case 'R':
diff --git a/drivers/staging/wilc1000/wilc_wlan_cfg.h b/drivers/staging/wilc1000/wilc_wlan_cfg.h
index b8641a2..79644c4 100644
--- a/drivers/staging/wilc1000/wilc_wlan_cfg.h
+++ b/drivers/staging/wilc1000/wilc_wlan_cfg.h
@@ -1,11 +1,8 @@
-/* ////////////////////////////////////////////////////////////////////////// */
-/* */
-/* Copyright (c) Atmel Corporation. All rights reserved. */
-/* */
-/* Module Name: wilc_wlan_cfg.h */
-/* */
-/* */
-/* ///////////////////////////////////////////////////////////////////////// */
+/*
+/* Copyright (c) Atmel Corporation. All rights reserved.
+ *
+ * Module Name: wilc_wlan_cfg.h
+ */
#ifndef WILC_WLAN_CFG_H
#define WILC_WLAN_CFG_H
diff --git a/drivers/staging/wilc1000/wilc_wlan_if.h b/drivers/staging/wilc1000/wilc_wlan_if.h
index 83cf84d..fb5a0ca 100644
--- a/drivers/staging/wilc1000/wilc_wlan_if.h
+++ b/drivers/staging/wilc1000/wilc_wlan_if.h
@@ -1,11 +1,7 @@
-/* ///////////////////////////////////////////////////////////////////////// */
-/* */
-/* Copyright (c) Atmel Corporation. All rights reserved. */
-/* */
-/* Module Name: wilc_wlan_if.h */
-/* */
-/* */
-/* ///////////////////////////////////////////////////////////////////////// */
+/*
+ * Copyright (c) Atmel Corporation. All rights reserved.
+ * Module Name: wilc_wlan_if.h
+ */
#ifndef WILC_WLAN_IF_H
#define WILC_WLAN_IF_H
@@ -13,11 +9,7 @@
#include <linux/semaphore.h>
#include <linux/netdevice.h>
-/********************************************
- *
- * Debug Flags
- *
- ********************************************/
+/* Debug Flags */
#define N_INIT 0x00000001
#define N_ERR 0x00000002
@@ -25,30 +17,18 @@
#define N_INTR 0x00000008
#define N_RXQ 0x00000010
-/********************************************
- *
- * Host Interface Defines
- *
- ********************************************/
+/* Host Interface Defines */
#define HIF_SDIO (0)
#define HIF_SPI BIT(0)
#define HIF_SDIO_GPIO_IRQ BIT(2)
-/********************************************
- *
- * Tx/Rx Buffer Size Defines
- *
- ********************************************/
+/* Tx/Rx Buffer Size Defines */
#define CE_TX_BUFFER_SIZE (64 * 1024)
#define CE_RX_BUFFER_SIZE (384 * 1024)
-/********************************************
- *
- * Wlan Interface Defines
- *
- ********************************************/
+/* Wlan Interface Defines */
struct sdio_cmd52 {
u32 read_write: 1;
@@ -87,11 +67,7 @@ typedef void (*wilc_tx_complete_func_t)(void *, int);
#define WILC_TX_ERR_NO_BUF (-2)
-/********************************************
- *
- * Wlan Configuration ID
- *
- ********************************************/
+/* Wlan Configuration ID */
#define WILC_MULTICAST_TABLE_SIZE 8
#define MAX_SSID_LEN 33
#define MAX_RATES_SUPPORTED 12
@@ -270,7 +246,7 @@ typedef enum {
typedef enum {
STATIC_MODE = 1,
DYNAMIC_MODE = 2,
- MIMO_MODE = 3, /* power save disable */
+ MIMO_MODE = 3, /* Power save disable */
} N_SMPS_MODE_T;
typedef enum {
--
1.9.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
