[PATCH 1/2] staging: dgnc: fix 'line over 80 characters'

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



fix checkpatch.pl warning about 'line over 80 characters'
in dgnc_neo.c

Signed-off-by: Daeseok Youn <daeseok.youn@xxxxxxxxx>
---
 drivers/staging/dgnc/dgnc_neo.c | 66 +++++++++++++++++++++++++++--------------
 1 file changed, 44 insertions(+), 22 deletions(-)

diff --git a/drivers/staging/dgnc/dgnc_neo.c b/drivers/staging/dgnc/dgnc_neo.c
index 31ac437..10b596f 100644
--- a/drivers/staging/dgnc/dgnc_neo.c
+++ b/drivers/staging/dgnc/dgnc_neo.c
@@ -77,7 +77,8 @@ struct board_ops dgnc_neo_ops = {
 	.send_immediate_char =		neo_send_immediate_char
 };
 
-static uint dgnc_offset_table[8] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 };
+static uint dgnc_offset_table[8] = { 0x01, 0x02, 0x04, 0x08,
+				     0x10, 0x20, 0x40, 0x80 };
 
 /*
  * This function allows calls to ensure that all outstanding
@@ -116,7 +117,8 @@ static inline void neo_set_cts_flow_control(struct channel_t *ch)
 	writeb(efr, &ch->ch_neo_uart->efr);
 
 	/* Turn on table D, with 8 char hi/low watermarks */
-	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY), &ch->ch_neo_uart->fctr);
+	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY),
+		&ch->ch_neo_uart->fctr);
 
 	/* Feed the UART our trigger levels */
 	writeb(8, &ch->ch_neo_uart->tfifo);
@@ -150,7 +152,8 @@ static inline void neo_set_rts_flow_control(struct channel_t *ch)
 	/* Turn on UART enhanced bits */
 	writeb(efr, &ch->ch_neo_uart->efr);
 
-	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY), &ch->ch_neo_uart->fctr);
+	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY),
+		&ch->ch_neo_uart->fctr);
 	ch->ch_r_watermark = 4;
 
 	writeb(32, &ch->ch_neo_uart->rfifo);
@@ -187,7 +190,8 @@ static inline void neo_set_ixon_flow_control(struct channel_t *ch)
 	/* Turn on UART enhanced bits */
 	writeb(efr, &ch->ch_neo_uart->efr);
 
-	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr);
+	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY),
+	       &ch->ch_neo_uart->fctr);
 	ch->ch_r_watermark = 4;
 
 	writeb(32, &ch->ch_neo_uart->rfifo);
@@ -225,7 +229,8 @@ static inline void neo_set_ixoff_flow_control(struct channel_t *ch)
 	writeb(efr, &ch->ch_neo_uart->efr);
 
 	/* Turn on table D, with 8 char hi/low watermarks */
-	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr);
+	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY),
+		&ch->ch_neo_uart->fctr);
 
 	writeb(8, &ch->ch_neo_uart->tfifo);
 	ch->ch_t_tlevel = 8;
@@ -265,7 +270,8 @@ static inline void neo_set_no_input_flow_control(struct channel_t *ch)
 	writeb(efr, &ch->ch_neo_uart->efr);
 
 	/* Turn on table D, with 8 char hi/low watermarks */
-	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr);
+	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY),
+		&ch->ch_neo_uart->fctr);
 
 	ch->ch_r_watermark = 0;
 
@@ -302,7 +308,8 @@ static inline void neo_set_no_output_flow_control(struct channel_t *ch)
 	writeb(efr, &ch->ch_neo_uart->efr);
 
 	/* Turn on table D, with 8 char hi/low watermarks */
-	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr);
+	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY),
+		&ch->ch_neo_uart->fctr);
 
 	ch->ch_r_watermark = 0;
 
@@ -321,7 +328,8 @@ static inline void neo_set_no_output_flow_control(struct channel_t *ch)
 static inline void neo_set_new_start_stop_chars(struct channel_t *ch)
 {
 	/* if hardware flow control is set, then skip this whole thing */
-	if (ch->ch_digi.digi_flags & (CTSPACE | RTSPACE) || ch->ch_c_cflag & CRTSCTS)
+	if (ch->ch_digi.digi_flags & (CTSPACE | RTSPACE) ||
+	    ch->ch_c_cflag & CRTSCTS)
 		return;
 
 	/* Tell UART what start/stop chars it should be looking for */
@@ -393,7 +401,8 @@ static inline void neo_parse_isr(struct dgnc_board *brd, uint port)
 			break;
 
 		/*
-		 * Yank off the upper 2 bits, which just show that the FIFO's are enabled.
+		 * Yank off the upper 2 bits,
+		 * which just show that the FIFO's are enabled.
 		 */
 		isr &= ~(UART_17158_IIR_FIFO_ENABLED);
 
@@ -666,7 +675,8 @@ static void neo_param(struct tty_struct *tty)
 		};
 
 		/* Only use the TXPrint baud rate if the terminal unit is NOT open */
-		if (!(ch->ch_tun.un_flags & UN_ISOPEN) && (un->un_type == DGNC_PRINT))
+		if (!(ch->ch_tun.un_flags & UN_ISOPEN) &&
+		    (un->un_type == DGNC_PRINT))
 			baud = C_BAUD(ch->ch_pun.un_tty) & 0xff;
 		else
 			baud = C_BAUD(ch->ch_tun.un_tty) & 0xff;
@@ -679,7 +689,8 @@ static void neo_param(struct tty_struct *tty)
 
 		jindex = baud;
 
-		if ((iindex >= 0) && (iindex < 4) && (jindex >= 0) && (jindex < 16))
+		if ((iindex >= 0) && (iindex < 4) &&
+		    (jindex >= 0) && (jindex < 16))
 			baud = bauds[iindex][jindex];
 		else
 			baud = 0;
@@ -787,7 +798,8 @@ static void neo_param(struct tty_struct *tty)
 		neo_set_cts_flow_control(ch);
 	} else if (ch->ch_c_iflag & IXON) {
 		/* If start/stop is set to disable, then we should disable flow control */
-		if ((ch->ch_startc == _POSIX_VDISABLE) || (ch->ch_stopc == _POSIX_VDISABLE))
+		if ((ch->ch_startc == _POSIX_VDISABLE) ||
+		    (ch->ch_stopc == _POSIX_VDISABLE))
 			neo_set_no_output_flow_control(ch);
 		else
 			neo_set_ixon_flow_control(ch);
@@ -799,7 +811,8 @@ static void neo_param(struct tty_struct *tty)
 		neo_set_rts_flow_control(ch);
 	} else if (ch->ch_c_iflag & IXOFF) {
 		/* If start/stop is set to disable, then we should disable flow control */
-		if ((ch->ch_startc == _POSIX_VDISABLE) || (ch->ch_stopc == _POSIX_VDISABLE))
+		if ((ch->ch_startc == _POSIX_VDISABLE) ||
+		    (ch->ch_stopc == _POSIX_VDISABLE))
 			neo_set_no_input_flow_control(ch);
 		else
 			neo_set_ixoff_flow_control(ch);
@@ -1172,7 +1185,8 @@ static void neo_copy_data_from_uart_to_queue(struct channel_t *ch)
 		linestatus = 0;
 
 		/* Copy data from uart to the queue */
-		memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, n);
+		memcpy_fromio(ch->ch_rqueue + head,
+			      &ch->ch_neo_uart->txrxburst, n);
 
 		/*
 		 * Since RX_FIFO_DATA_ERROR was 0, we are guaranteed
@@ -1225,7 +1239,8 @@ static void neo_copy_data_from_uart_to_queue(struct channel_t *ch)
 		 * we don't miss our TX FIFO emptys.
 		 */
 		if (linestatus & (UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR)) {
-			linestatus &= ~(UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR);
+			linestatus &= ~(UART_LSR_THRE |
+					UART_17158_TX_AND_FIFO_CLR);
 			ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
 		}
 
@@ -1255,7 +1270,8 @@ static void neo_copy_data_from_uart_to_queue(struct channel_t *ch)
 			qleft++;
 		}
 
-		memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, 1);
+		memcpy_fromio(ch->ch_rqueue + head,
+			      &ch->ch_neo_uart->txrxburst, 1);
 		ch->ch_equeue[head] = (unsigned char)linestatus;
 
 		/* Ditch any remaining linestatus value. */
@@ -1328,7 +1344,8 @@ static void neo_flush_uart_write(struct channel_t *ch)
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
 		return;
 
-	writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_XMIT), &ch->ch_neo_uart->isr_fcr);
+	writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_XMIT),
+	       &ch->ch_neo_uart->isr_fcr);
 	neo_pci_posting_flush(ch->ch_bd);
 
 	for (i = 0; i < 10; i++) {
@@ -1356,7 +1373,8 @@ static void neo_flush_uart_read(struct channel_t *ch)
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
 		return;
 
-	writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR), &ch->ch_neo_uart->isr_fcr);
+	writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR),
+	       &ch->ch_neo_uart->isr_fcr);
 	neo_pci_posting_flush(ch->ch_bd);
 
 	for (i = 0; i < 10; i++) {
@@ -1427,7 +1445,8 @@ static void neo_copy_data_from_queue_to_uart(struct channel_t *ch)
 				ch->ch_tun.un_flags |= (UN_EMPTY);
 			}
 
-			writeb(ch->ch_wqueue[ch->ch_w_tail], &ch->ch_neo_uart->txrx);
+			writeb(ch->ch_wqueue[ch->ch_w_tail],
+			       &ch->ch_neo_uart->txrx);
 			ch->ch_w_tail++;
 			ch->ch_w_tail &= WQUEUEMASK;
 			ch->ch_txcount++;
@@ -1494,7 +1513,8 @@ static void neo_copy_data_from_queue_to_uart(struct channel_t *ch)
 			ch->ch_tun.un_flags |= (UN_EMPTY);
 		}
 
-		memcpy_toio(&ch->ch_neo_uart->txrxburst, ch->ch_wqueue + tail, s);
+		memcpy_toio(&ch->ch_neo_uart->txrxburst,
+			    ch->ch_wqueue + tail, s);
 
 		/* Add and flip queue if needed */
 		tail = (tail + s) & WQUEUEMASK;
@@ -1628,7 +1648,8 @@ static void neo_uart_init(struct channel_t *ch)
 
 	/* Clear out UART and FIFO */
 	readb(&ch->ch_neo_uart->txrx);
-	writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), &ch->ch_neo_uart->isr_fcr);
+	writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
+	       &ch->ch_neo_uart->isr_fcr);
 	readb(&ch->ch_neo_uart->lsr);
 	readb(&ch->ch_neo_uart->msr);
 
@@ -1725,7 +1746,8 @@ static void neo_send_immediate_char(struct channel_t *ch, unsigned char c)
 	neo_pci_posting_flush(ch->ch_bd);
 }
 
-static unsigned int neo_read_eeprom(unsigned char __iomem *base, unsigned int address)
+static unsigned int neo_read_eeprom(unsigned char __iomem *base,
+				    unsigned int address)
 {
 	unsigned int enable;
 	unsigned int bits;
-- 
1.9.1

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux