2016-03-22 21:21 GMT+09:00 walter harms <wharms@xxxxxx>:
>
> You have send this patch before, right ?
> then it is a good custom to have something like: [Patch V2] in the
> subject line. In the comment you should write somethink like
>
> v2: fix withspace damage
> v1: fix issue
>
> Otherwise none of the reviewer maintainer will see what was changes.
> Sometimes patch run a few rounds before applied.
Yes, you're right.
I should leave a message.. sorry.
I had been making many patches, I think, until last year.
But I didn't contribute to linux kernel for long time(maybe one year.. :-( )
And I made mistakes while sending patches.. I was breaking the working
code because of this.
So I want to start over from making minor patches like fixing coding style.
Now, this patch was taken by Greg.
And also I will try to fix other coding style first of this module.
(I had been fixing issues dgap module that was removed in linux-next
branch. dgnc has same issues what dgap has.
I can also fix issues in dgnc module.)
Thanks for comment.
regards,
Daeseok.
>
> just my two cents
>
> re,
> wh
>
> Am 22.03.2016 10:20, schrieb Daeseok Youn:
>> fix the checkpatch.pl warning about CamelCase.
>>
>> Signed-off-by: Daeseok Youn <daeseok.youn@xxxxxxxxx>
>> ---
>> drivers/staging/dgnc/dgnc_driver.h | 4 +-
>> drivers/staging/dgnc/dgnc_tty.c | 118 ++++++++++++++++++-------------------
>> 2 files changed, 61 insertions(+), 61 deletions(-)
>>
>> diff --git a/drivers/staging/dgnc/dgnc_driver.h b/drivers/staging/dgnc/dgnc_driver.h
>> index e4be81b..953c891 100644
>> --- a/drivers/staging/dgnc/dgnc_driver.h
>> +++ b/drivers/staging/dgnc/dgnc_driver.h
>> @@ -202,9 +202,9 @@ struct dgnc_board {
>> * to our channels.
>> */
>>
>> - struct tty_driver SerialDriver;
>> + struct tty_driver serial_driver;
>> char SerialName[200];
>> - struct tty_driver PrintDriver;
>> + struct tty_driver print_driver;
>> char PrintName[200];
>>
>> bool dgnc_Major_Serial_Registered;
>> diff --git a/drivers/staging/dgnc/dgnc_tty.c b/drivers/staging/dgnc/dgnc_tty.c
>> index bcd2bdf..081ac75 100644
>> --- a/drivers/staging/dgnc/dgnc_tty.c
>> +++ b/drivers/staging/dgnc/dgnc_tty.c
>> @@ -178,20 +178,20 @@ int dgnc_tty_register(struct dgnc_board *brd)
>> {
>> int rc = 0;
>>
>> - brd->SerialDriver.magic = TTY_DRIVER_MAGIC;
>> + brd->serial_driver.magic = TTY_DRIVER_MAGIC;
>>
>> snprintf(brd->SerialName, MAXTTYNAMELEN, "tty_dgnc_%d_", brd->boardnum);
>>
>> - brd->SerialDriver.name = brd->SerialName;
>> - brd->SerialDriver.name_base = 0;
>> - brd->SerialDriver.major = 0;
>> - brd->SerialDriver.minor_start = 0;
>> - brd->SerialDriver.num = brd->maxports;
>> - brd->SerialDriver.type = TTY_DRIVER_TYPE_SERIAL;
>> - brd->SerialDriver.subtype = SERIAL_TYPE_NORMAL;
>> - brd->SerialDriver.init_termios = DgncDefaultTermios;
>> - brd->SerialDriver.driver_name = DRVSTR;
>> - brd->SerialDriver.flags = (TTY_DRIVER_REAL_RAW |
>> + brd->serial_driver.name = brd->SerialName;
>> + brd->serial_driver.name_base = 0;
>> + brd->serial_driver.major = 0;
>> + brd->serial_driver.minor_start = 0;
>> + brd->serial_driver.num = brd->maxports;
>> + brd->serial_driver.type = TTY_DRIVER_TYPE_SERIAL;
>> + brd->serial_driver.subtype = SERIAL_TYPE_NORMAL;
>> + brd->serial_driver.init_termios = DgncDefaultTermios;
>> + brd->serial_driver.driver_name = DRVSTR;
>> + brd->serial_driver.flags = (TTY_DRIVER_REAL_RAW |
>> TTY_DRIVER_DYNAMIC_DEV |
>> TTY_DRIVER_HARDWARE_BREAK);
>>
>> @@ -199,28 +199,28 @@ int dgnc_tty_register(struct dgnc_board *brd)
>> * The kernel wants space to store pointers to
>> * tty_struct's and termios's.
>> */
>> - brd->SerialDriver.ttys = kcalloc(brd->maxports,
>> - sizeof(*brd->SerialDriver.ttys),
>> + brd->serial_driver.ttys = kcalloc(brd->maxports,
>> + sizeof(*brd->serial_driver.ttys),
>> GFP_KERNEL);
>> - if (!brd->SerialDriver.ttys)
>> + if (!brd->serial_driver.ttys)
>> return -ENOMEM;
>>
>> - kref_init(&brd->SerialDriver.kref);
>> - brd->SerialDriver.termios = kcalloc(brd->maxports,
>> - sizeof(*brd->SerialDriver.termios),
>> + kref_init(&brd->serial_driver.kref);
>> + brd->serial_driver.termios = kcalloc(brd->maxports,
>> + sizeof(*brd->serial_driver.termios),
>> GFP_KERNEL);
>> - if (!brd->SerialDriver.termios)
>> + if (!brd->serial_driver.termios)
>> return -ENOMEM;
>>
>> /*
>> * Entry points for driver. Called by the kernel from
>> * tty_io.c and n_tty.c.
>> */
>> - tty_set_operations(&brd->SerialDriver, &dgnc_tty_ops);
>> + tty_set_operations(&brd->serial_driver, &dgnc_tty_ops);
>>
>> if (!brd->dgnc_Major_Serial_Registered) {
>> /* Register tty devices */
>> - rc = tty_register_driver(&brd->SerialDriver);
>> + rc = tty_register_driver(&brd->serial_driver);
>> if (rc < 0) {
>> dev_dbg(&brd->pdev->dev,
>> "Can't register tty device (%d)\n", rc);
>> @@ -234,19 +234,19 @@ int dgnc_tty_register(struct dgnc_board *brd)
>> * again, separately so we don't get the LD confused about what major
>> * we are when we get into the dgnc_tty_open() routine.
>> */
>> - brd->PrintDriver.magic = TTY_DRIVER_MAGIC;
>> + brd->print_driver.magic = TTY_DRIVER_MAGIC;
>> snprintf(brd->PrintName, MAXTTYNAMELEN, "pr_dgnc_%d_", brd->boardnum);
>>
>> - brd->PrintDriver.name = brd->PrintName;
>> - brd->PrintDriver.name_base = 0;
>> - brd->PrintDriver.major = brd->SerialDriver.major;
>> - brd->PrintDriver.minor_start = 0x80;
>> - brd->PrintDriver.num = brd->maxports;
>> - brd->PrintDriver.type = TTY_DRIVER_TYPE_SERIAL;
>> - brd->PrintDriver.subtype = SERIAL_TYPE_NORMAL;
>> - brd->PrintDriver.init_termios = DgncDefaultTermios;
>> - brd->PrintDriver.driver_name = DRVSTR;
>> - brd->PrintDriver.flags = (TTY_DRIVER_REAL_RAW |
>> + brd->print_driver.name = brd->PrintName;
>> + brd->print_driver.name_base = 0;
>> + brd->print_driver.major = brd->serial_driver.major;
>> + brd->print_driver.minor_start = 0x80;
>> + brd->print_driver.num = brd->maxports;
>> + brd->print_driver.type = TTY_DRIVER_TYPE_SERIAL;
>> + brd->print_driver.subtype = SERIAL_TYPE_NORMAL;
>> + brd->print_driver.init_termios = DgncDefaultTermios;
>> + brd->print_driver.driver_name = DRVSTR;
>> + brd->print_driver.flags = (TTY_DRIVER_REAL_RAW |
>> TTY_DRIVER_DYNAMIC_DEV |
>> TTY_DRIVER_HARDWARE_BREAK);
>>
>> @@ -255,27 +255,27 @@ int dgnc_tty_register(struct dgnc_board *brd)
>> * tty_struct's and termios's. Must be separated from
>> * the Serial Driver so we don't get confused
>> */
>> - brd->PrintDriver.ttys = kcalloc(brd->maxports,
>> - sizeof(*brd->PrintDriver.ttys),
>> + brd->print_driver.ttys = kcalloc(brd->maxports,
>> + sizeof(*brd->print_driver.ttys),
>> GFP_KERNEL);
>> - if (!brd->PrintDriver.ttys)
>> + if (!brd->print_driver.ttys)
>> return -ENOMEM;
>> - kref_init(&brd->PrintDriver.kref);
>> - brd->PrintDriver.termios = kcalloc(brd->maxports,
>> - sizeof(*brd->PrintDriver.termios),
>> + kref_init(&brd->print_driver.kref);
>> + brd->print_driver.termios = kcalloc(brd->maxports,
>> + sizeof(*brd->print_driver.termios),
>> GFP_KERNEL);
>> - if (!brd->PrintDriver.termios)
>> + if (!brd->print_driver.termios)
>> return -ENOMEM;
>>
>> /*
>> * Entry points for driver. Called by the kernel from
>> * tty_io.c and n_tty.c.
>> */
>> - tty_set_operations(&brd->PrintDriver, &dgnc_tty_ops);
>> + tty_set_operations(&brd->print_driver, &dgnc_tty_ops);
>>
>> if (!brd->dgnc_Major_TransparentPrint_Registered) {
>> /* Register Transparent Print devices */
>> - rc = tty_register_driver(&brd->PrintDriver);
>> + rc = tty_register_driver(&brd->print_driver);
>> if (rc < 0) {
>> dev_dbg(&brd->pdev->dev,
>> "Can't register Transparent Print device(%d)\n",
>> @@ -285,9 +285,9 @@ int dgnc_tty_register(struct dgnc_board *brd)
>> brd->dgnc_Major_TransparentPrint_Registered = true;
>> }
>>
>> - dgnc_BoardsByMajor[brd->SerialDriver.major] = brd;
>> - brd->dgnc_Serial_Major = brd->SerialDriver.major;
>> - brd->dgnc_TransparentPrint_Major = brd->PrintDriver.major;
>> + dgnc_BoardsByMajor[brd->serial_driver.major] = brd;
>> + brd->dgnc_Serial_Major = brd->serial_driver.major;
>> + brd->dgnc_TransparentPrint_Major = brd->print_driver.major;
>>
>> return rc;
>> }
>> @@ -364,12 +364,12 @@ int dgnc_tty_init(struct dgnc_board *brd)
>> {
>> struct device *classp;
>>
>> - classp = tty_register_device(&brd->SerialDriver, i,
>> + classp = tty_register_device(&brd->serial_driver, i,
>> &ch->ch_bd->pdev->dev);
>> ch->ch_tun.un_sysfs = classp;
>> dgnc_create_tty_sysfs(&ch->ch_tun, classp);
>>
>> - classp = tty_register_device(&brd->PrintDriver, i,
>> + classp = tty_register_device(&brd->print_driver, i,
>> &ch->ch_bd->pdev->dev);
>> ch->ch_pun.un_sysfs = classp;
>> dgnc_create_tty_sysfs(&ch->ch_pun, classp);
>> @@ -408,39 +408,39 @@ void dgnc_tty_uninit(struct dgnc_board *brd)
>> int i = 0;
>>
>> if (brd->dgnc_Major_Serial_Registered) {
>> - dgnc_BoardsByMajor[brd->SerialDriver.major] = NULL;
>> + dgnc_BoardsByMajor[brd->serial_driver.major] = NULL;
>> brd->dgnc_Serial_Major = 0;
>> for (i = 0; i < brd->nasync; i++) {
>> if (brd->channels[i])
>> dgnc_remove_tty_sysfs(brd->channels[i]->
>> ch_tun.un_sysfs);
>> - tty_unregister_device(&brd->SerialDriver, i);
>> + tty_unregister_device(&brd->serial_driver, i);
>> }
>> - tty_unregister_driver(&brd->SerialDriver);
>> + tty_unregister_driver(&brd->serial_driver);
>> brd->dgnc_Major_Serial_Registered = false;
>> }
>>
>> if (brd->dgnc_Major_TransparentPrint_Registered) {
>> - dgnc_BoardsByMajor[brd->PrintDriver.major] = NULL;
>> + dgnc_BoardsByMajor[brd->print_driver.major] = NULL;
>> brd->dgnc_TransparentPrint_Major = 0;
>> for (i = 0; i < brd->nasync; i++) {
>> if (brd->channels[i])
>> dgnc_remove_tty_sysfs(brd->channels[i]->
>> ch_pun.un_sysfs);
>> - tty_unregister_device(&brd->PrintDriver, i);
>> + tty_unregister_device(&brd->print_driver, i);
>> }
>> - tty_unregister_driver(&brd->PrintDriver);
>> + tty_unregister_driver(&brd->print_driver);
>> brd->dgnc_Major_TransparentPrint_Registered = false;
>> }
>>
>> - kfree(brd->SerialDriver.ttys);
>> - brd->SerialDriver.ttys = NULL;
>> - kfree(brd->SerialDriver.termios);
>> - brd->SerialDriver.termios = NULL;
>> - kfree(brd->PrintDriver.ttys);
>> - brd->PrintDriver.ttys = NULL;
>> - kfree(brd->PrintDriver.termios);
>> - brd->PrintDriver.termios = NULL;
>> + kfree(brd->serial_driver.ttys);
>> + brd->serial_driver.ttys = NULL;
>> + kfree(brd->serial_driver.termios);
>> + brd->serial_driver.termios = NULL;
>> + kfree(brd->print_driver.ttys);
>> + brd->print_driver.ttys = NULL;
>> + kfree(brd->print_driver.termios);
>> + brd->print_driver.termios = NULL;
>> }
>>
>> /*
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
