> -----Original Message----- > From: James Bottomley [mailto:James.Bottomley@xxxxxxxxxxxxxxxxxxxxx] > Sent: Wednesday, March 16, 2016 4:41 PM > To: KY Srinivasan <kys@xxxxxxxxxxxxx>; Martin K. Petersen > <martin.petersen@xxxxxxxxxx> > Cc: Christoph Hellwig <hch@xxxxxxxxxxxxx>; gregkh@xxxxxxxxxxxxxxxxxxx; > linux-kernel@xxxxxxxxxxxxxxx; devel@xxxxxxxxxxxxxxxxxxxxxx; > ohering@xxxxxxxx; jbottomley@xxxxxxxxxxxxx; linux-scsi@xxxxxxxxxxxxxxx; > apw@xxxxxxxxxxxxx; vkuznets@xxxxxxxxxx; jasowang@xxxxxxxxxx; > hare@xxxxxxx > Subject: Re: [PATCH 1/1] scsi: storvsc: Support manual scan of FC hosts on > Hyper-V > > On Wed, 2016-03-16 at 23:15 +0000, KY Srinivasan wrote: > > > > > -----Original Message----- > > > From: James Bottomley > [mailto:James.Bottomley@xxxxxxxxxxxxxxxxxxxxx > > > ] > > > Sent: Wednesday, March 16, 2016 4:08 PM > > > To: Martin K. Petersen <martin.petersen@xxxxxxxxxx>; KY Srinivasan > > > <kys@xxxxxxxxxxxxx> > > > Cc: Christoph Hellwig <hch@xxxxxxxxxxxxx>; > > > gregkh@xxxxxxxxxxxxxxxxxxx; > > > linux-kernel@xxxxxxxxxxxxxxx; devel@xxxxxxxxxxxxxxxxxxxxxx; > > > ohering@xxxxxxxx; jbottomley@xxxxxxxxxxxxx; > > > linux-scsi@xxxxxxxxxxxxxxx; > > > apw@xxxxxxxxxxxxx; vkuznets@xxxxxxxxxx; jasowang@xxxxxxxxxx; > > > hare@xxxxxxx > > > Subject: Re: [PATCH 1/1] scsi: storvsc: Support manual scan of FC > > > hosts on > > > Hyper-V > > > > > > On Wed, 2016-03-16 at 18:34 -0400, Martin K. Petersen wrote: > > > > > > > > > "KY" == KY Srinivasan <kys@xxxxxxxxxxxxx> writes: > > > > > > > > KY> How would I get the sysfs files under fc_host if I don't use > > > > the > > > > FC > > > > KY> transport. The customer scripts expect these sysfs files. > > > > > > > > Right, but I was interested in finding out why they need those > > > > files. And whether an alternative to the FC transport would be a > > > > better solution. > > > > > > If it's just the wwn file (or a set of other values), we might be > > > able > > > to separate that bit out of the FC transport class so you can use > > > it > > > independently ... do you have a full list of the files being used? > > > > Wwn files are what we can support on Hyper-V and that is what I want > > to support (to address customer requirements). > > There is no wwn file. These are all the possible attributes they could > use; which one(s) do you want: > > /* > * Setup SCSI Host Attributes. > */ > SETUP_HOST_ATTRIBUTE_RD(node_name); > SETUP_HOST_ATTRIBUTE_RD(port_name); > SETUP_HOST_ATTRIBUTE_RD(permanent_port_name); > SETUP_HOST_ATTRIBUTE_RD(supported_classes); > SETUP_HOST_ATTRIBUTE_RD(supported_fc4s); > SETUP_HOST_ATTRIBUTE_RD(supported_speeds); > SETUP_HOST_ATTRIBUTE_RD(maxframe_size); > if (ft->vport_create) { > SETUP_HOST_ATTRIBUTE_RD_NS(max_npiv_vports); > SETUP_HOST_ATTRIBUTE_RD_NS(npiv_vports_inuse); > } > SETUP_HOST_ATTRIBUTE_RD(serial_number); > SETUP_HOST_ATTRIBUTE_RD(manufacturer); > SETUP_HOST_ATTRIBUTE_RD(model); > SETUP_HOST_ATTRIBUTE_RD(model_description); > SETUP_HOST_ATTRIBUTE_RD(hardware_version); > SETUP_HOST_ATTRIBUTE_RD(driver_version); > SETUP_HOST_ATTRIBUTE_RD(firmware_version); > SETUP_HOST_ATTRIBUTE_RD(optionrom_version); > > SETUP_HOST_ATTRIBUTE_RD(port_id); > SETUP_HOST_ATTRIBUTE_RD(port_type); > SETUP_HOST_ATTRIBUTE_RD(port_state); > SETUP_HOST_ATTRIBUTE_RD(active_fc4s); > SETUP_HOST_ATTRIBUTE_RD(speed); > SETUP_HOST_ATTRIBUTE_RD(fabric_name); > SETUP_HOST_ATTRIBUTE_RD(symbolic_name); > SETUP_HOST_ATTRIBUTE_RW(system_hostname); > > /* Transport-managed attributes */ > SETUP_PRIVATE_HOST_ATTRIBUTE_RW(dev_loss_tmo); > SETUP_PRIVATE_HOST_ATTRIBUTE_RW(tgtid_bind_type); > if (ft->issue_fc_host_lip) > SETUP_PRIVATE_HOST_ATTRIBUTE_RW(issue_lip); > if (ft->vport_create) > SETUP_PRIVATE_HOST_ATTRIBUTE_RW(vport_create); > if (ft->vport_delete) > SETUP_PRIVATE_HOST_ATTRIBUTE_RW(vport_delete); > /* > * Setup Remote Port Attributes. > */ > count=0; > SETUP_RPORT_ATTRIBUTE_RD(maxframe_size); > SETUP_RPORT_ATTRIBUTE_RD(supported_classes); > SETUP_RPORT_ATTRIBUTE_RW(dev_loss_tmo); > SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(node_name); > SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(port_name); > SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(port_id); > SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(roles); > SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(port_state); > SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(scsi_target_id); > SETUP_PRIVATE_RPORT_ATTRIBUTE_RW(fast_io_fail_tmo); > > /* > * Setup Virtual Port Attributes. > */ > SETUP_PRIVATE_VPORT_ATTRIBUTE_RD(vport_state); > SETUP_PRIVATE_VPORT_ATTRIBUTE_RD(vport_last_state); > SETUP_PRIVATE_VPORT_ATTRIBUTE_RD(node_name); > SETUP_PRIVATE_VPORT_ATTRIBUTE_RD(port_name); > SETUP_PRIVATE_VPORT_ATTRIBUTE_RD(roles); > SETUP_PRIVATE_VPORT_ATTRIBUTE_RD(vport_type); > SETUP_VPORT_ATTRIBUTE_RW(symbolic_name); > SETUP_VPORT_ATTRIBUTE_WR(vport_delete); > SETUP_VPORT_ATTRIBUTE_WR(vport_disable); > > I'm assuming it's host and rport port_id? The only attributes I would be interested are: 1) node name 2) port name Ideally, if this can show under /sys/class/fc_host/hostx/port_name and node_name, it will be ideal since all user scripts can work. Regards, K. Y _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
