[PATCH 1/9] staging: rtl8192u: check return value of read_nic_word_E

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The call of read_nic_word_E may fail, therefore its return value must be
checked and propagated in the case of error.

Signed-off-by: Salah Triki <salah.triki@xxxxxxx>
---
 drivers/staging/rtl8192u/r8180_93cx6.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/staging/rtl8192u/r8180_93cx6.c b/drivers/staging/rtl8192u/r8180_93cx6.c
index 97d9b3f..da68b67 100644
--- a/drivers/staging/rtl8192u/r8180_93cx6.c
+++ b/drivers/staging/rtl8192u/r8180_93cx6.c
@@ -23,8 +23,11 @@
 static void eprom_cs(struct net_device *dev, short bit)
 {
 	u8 cmdreg;
+	int err;
 
-	read_nic_byte_E(dev, EPROM_CMD, &cmdreg);
+	err = read_nic_byte_E(dev, EPROM_CMD, &cmdreg);
+	if (err)
+		return;
 	if (bit)
 		/* enable EPROM */
 		write_nic_byte_E(dev, EPROM_CMD, cmdreg | EPROM_CS_BIT);
@@ -40,8 +43,11 @@ static void eprom_cs(struct net_device *dev, short bit)
 static void eprom_ck_cycle(struct net_device *dev)
 {
 	u8 cmdreg;
+	int err;
 
-	read_nic_byte_E(dev, EPROM_CMD, &cmdreg);
+	err = read_nic_byte_E(dev, EPROM_CMD, &cmdreg);
+	if (err)
+		return;
 	write_nic_byte_E(dev, EPROM_CMD, cmdreg | EPROM_CK_BIT);
 	force_pci_posting(dev);
 	udelay(EPROM_DELAY);
@@ -56,8 +62,11 @@ static void eprom_ck_cycle(struct net_device *dev)
 static void eprom_w(struct net_device *dev, short bit)
 {
 	u8 cmdreg;
+	int err;
 
-	read_nic_byte_E(dev, EPROM_CMD, &cmdreg);
+	err = read_nic_byte_E(dev, EPROM_CMD, &cmdreg);
+	if (err)
+		return;
 	if (bit)
 		write_nic_byte_E(dev, EPROM_CMD, cmdreg | EPROM_W_BIT);
 	else
@@ -71,8 +80,12 @@ static void eprom_w(struct net_device *dev, short bit)
 static short eprom_r(struct net_device *dev)
 {
 	u8 bit;
+	int err;
+
+	err = read_nic_byte_E(dev, EPROM_CMD, &bit);
+	if (err)
+		return err;
 
-	read_nic_byte_E(dev, EPROM_CMD, &bit);
 	udelay(EPROM_DELAY);
 
 	if (bit & EPROM_R_BIT)
@@ -102,7 +115,6 @@ u32 eprom_read(struct net_device *dev, u32 addr)
 	int addr_len;
 	u32 ret;
 
-	ret = 0;
 	/* enable EPROM programming */
 	write_nic_byte_E(dev, EPROM_CMD,
 		       (EPROM_CMD_PROGRAM<<EPROM_CMD_OPERATING_MODE_SHIFT));
@@ -144,7 +156,7 @@ u32 eprom_read(struct net_device *dev, u32 addr)
 		 * and reading data. (eeprom outs a dummy 0)
 		 */
 		eprom_ck_cycle(dev);
-		ret |= (eprom_r(dev)<<(15-i));
+		ret |= (eprom_r(dev) << (15 - i));
 	}
 
 	eprom_cs(dev, 0);
-- 
1.9.1

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux