Re: [RFC PATCH v2 2/2] staging: iio: ad7192: use iio_device_{claim|release}_direct_mode()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/03/16 11:21, Jonathan Cameron wrote:
> On 09/03/16 19:30, Alison Schofield wrote:
>> Replace the code that guarantees the device stays in direct mode with
>> iio_device_{claim|release}_direct_mode() which does same.
>>
>> Signed-off-by: Alison Schofield <amsfield22@xxxxxxxxx>
> A small improvement inline - don't eat the errors within the
> driver. 
As it is trivial - I've fixed it up as suggested and applied.
Seemed silly to go round again for such a small change.

I'm hoping you have the opportunity to take this tree wide.

Thanks,

Jonathan
> 
> Jonathan
>> ---
>>  drivers/staging/iio/adc/ad7192.c | 24 +++++++++---------------
>>  1 file changed, 9 insertions(+), 15 deletions(-)
>>
>> diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c
>> index f843f19..94a2e06 100644
>> --- a/drivers/staging/iio/adc/ad7192.c
>> +++ b/drivers/staging/iio/adc/ad7192.c
>> @@ -349,11 +349,9 @@ static ssize_t ad7192_write_frequency(struct device *dev,
>>  	if (lval == 0)
>>  		return -EINVAL;
>>  
>> -	mutex_lock(&indio_dev->mlock);
>> -	if (iio_buffer_enabled(indio_dev)) {
>> -		mutex_unlock(&indio_dev->mlock);
>> +	ret = iio_device_claim_direct_mode(indio_dev);
>> +	if (ret)
>>  		return -EBUSY;
> return ret;  In theory we might be returning some other
> error code so best not to 'eat' the result.
>> -	}
>>  
>>  	div = st->mclk / (lval * st->f_order * 1024);
>>  	if (div < 1 || div > 1023) {
>> @@ -366,7 +364,7 @@ static ssize_t ad7192_write_frequency(struct device *dev,
>>  	ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
>>  
>>  out:
>> -	mutex_unlock(&indio_dev->mlock);
>> +	iio_device_release_direct_mode(indio_dev);
>>  
>>  	return ret ? ret : len;
>>  }
>> @@ -434,11 +432,9 @@ static ssize_t ad7192_set(struct device *dev,
>>  	if (ret < 0)
>>  		return ret;
>>  
>> -	mutex_lock(&indio_dev->mlock);
>> -	if (iio_buffer_enabled(indio_dev)) {
>> -		mutex_unlock(&indio_dev->mlock);
>> +	ret = iio_device_claim_direct_mode(indio_dev);
>> +	if (ret)
>>  		return -EBUSY;
> Same here.
>> -	}
>>  
>>  	switch ((u32)this_attr->address) {
>>  	case AD7192_REG_GPOCON:
>> @@ -461,7 +457,7 @@ static ssize_t ad7192_set(struct device *dev,
>>  		ret = -EINVAL;
>>  	}
>>  
>> -	mutex_unlock(&indio_dev->mlock);
>> +	iio_device_release_direct_mode(indio_dev);
>>  
>>  	return ret ? ret : len;
>>  }
>> @@ -555,11 +551,9 @@ static int ad7192_write_raw(struct iio_dev *indio_dev,
>>  	int ret, i;
>>  	unsigned int tmp;
>>  
>> -	mutex_lock(&indio_dev->mlock);
>> -	if (iio_buffer_enabled(indio_dev)) {
>> -		mutex_unlock(&indio_dev->mlock);
>> +	ret = iio_device_claim_direct_mode(indio_dev);
>> +	if (ret)
>>  		return -EBUSY;
> And here.
>> -	}
>>  
>>  	switch (mask) {
>>  	case IIO_CHAN_INFO_SCALE:
>> @@ -582,7 +576,7 @@ static int ad7192_write_raw(struct iio_dev *indio_dev,
>>  		ret = -EINVAL;
>>  	}
>>  
>> -	mutex_unlock(&indio_dev->mlock);
>> +	iio_device_release_direct_mode(indio_dev);
>>  
>>  	return ret;
>>  }
>>
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux