On 28/02/16 18:49, Jonathan Cameron wrote:
>
>
> On 28 February 2016 17:31:11 GMT+00:00, Bijosh Thykkoottathil <bijosh.t@xxxxxxxxxxx> wrote:
>> This patch fixes following coding style warning reported by check patch
>> script, in tsl2583 driver:
>> - Block comments use a trailing */ on a separate line
>>
>> Signed-off-by: Bijosh Thykkoottathil <bijosh.t@xxxxxxxxxxx>
> Excellent. I have a pull request out at the moment, so may be a few days before I apply this.
>
Ah, looks like Greg took a series of cleanup patches for this driver directly
so most if not all of this is originally in the tree.
Sorry about that, I never saw the relevant patches and don't think they were in my tree
until I did a merge today.
Jonathan
> Jonathan
>> ---
>> drivers/staging/iio/light/tsl2583.c | 30 ++++++++++++++++++++----------
>> 1 file changed, 20 insertions(+), 10 deletions(-)
>>
>> diff --git a/drivers/staging/iio/light/tsl2583.c
>> b/drivers/staging/iio/light/tsl2583.c
>> index 3100d96..8c9e304 100644
>> --- a/drivers/staging/iio/light/tsl2583.c
>> +++ b/drivers/staging/iio/light/tsl2583.c
>> @@ -240,8 +240,10 @@ static int taos_get_lux(struct iio_dev *indio_dev)
>> }
>> }
>>
>> - /* clear status, really interrupt status (interrupts are off), but
>> - * we use the bit anyway - don't forget 0x80 - this is a command*/
>> + /*
>> + * Clear status, really interrupt status (interrupts are off), but
>> + * we use the bit anyway - don't forget 0x80 - this is a command
>> + */
>> ret = i2c_smbus_write_byte(chip->client,
>> (TSL258X_CMD_REG | TSL258X_CMD_SPL_FN |
>> TSL258X_CMD_ALS_INT_CLR));
>> @@ -429,8 +431,10 @@ static int taos_chip_on(struct iio_dev *indio_dev)
>> chip->als_saturation = als_count * 922; /* 90% of full scale */
>> chip->als_time_scale = (als_time + 25) / 50;
>>
>> - /* TSL258x Specific power-on / adc enable sequence
>> - * Power on the device 1st. */
>> + /*
>> + * TSL258x Specific power-on / adc enable sequence
>> + * Power on the device 1st.
>> + */
>> utmp = TSL258X_CNTL_PWR_ON;
>> ret = i2c_smbus_write_byte_data(chip->client,
>> TSL258X_CMD_REG | TSL258X_CNTRL, utmp);
>> @@ -439,8 +443,10 @@ static int taos_chip_on(struct iio_dev *indio_dev)
>> return ret;
>> }
>>
>> - /* Use the following shadow copy for our delay before enabling ADC.
>> - * Write all the registers. */
>> + /*
>> + * Use the following shadow copy for our delay before enabling ADC.
>> + * Write all the registers.
>> + */
>> for (i = 0, uP = chip->taos_config; i < TSL258X_REG_MAX; i++) {
>> ret = i2c_smbus_write_byte_data(chip->client,
>> TSL258X_CMD_REG + i,
>> @@ -453,8 +459,10 @@ static int taos_chip_on(struct iio_dev *indio_dev)
>> }
>>
>> usleep_range(3000, 3500);
>> - /* NOW enable the ADC
>> - * initialize the desired mode of operation */
>> + /*
>> + * NOW enable the ADC
>> + * initialize the desired mode of operation
>> + */
>> utmp = TSL258X_CNTL_PWR_ON | TSL258X_CNTL_ADC_ENBL;
>> ret = i2c_smbus_write_byte_data(chip->client,
>> TSL258X_CMD_REG | TSL258X_CNTRL,
>> @@ -695,8 +703,10 @@ static ssize_t taos_luxtable_show(struct device
>> *dev,
>> taos_device_lux[i].ch0,
>> taos_device_lux[i].ch1);
>> if (taos_device_lux[i].ratio == 0) {
>> - /* We just printed the first "0" entry.
>> - * Now get rid of the extra "," and break. */
>> + /*
>> + * We just printed the first "0" entry.
>> + * Now get rid of the extra "," and break.
>> + */
>> offset--;
>> break;
>> }
>
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
