Check patch script reports a warning (exceeding the number of characters a line) in the commit message. Please ignore this patch as well and will be resending v3 of the same patch by correcting the warning.
Sorry for the inconvenience caused.
Regards,
-Bijosh
----------------------------------------
> From: bijosh.t@xxxxxxxxxxx
> To: gregkh@xxxxxxxxxxxxxxxxxxx; jic23@xxxxxxxxxx; knaack.h@xxxxxx; lars@xxxxxxxxxx; pmeerw@xxxxxxxxxx
> CC: mahfouz.saif.elyazal@xxxxxxxxx; devel@xxxxxxxxxxxxxxxxxxxx; linux-iio@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> Subject: [PATCH v2 1/1] staging: coding style cleanups for staging/iio/light/tsl2583 driver
> Date: Sun, 28 Feb 2016 13:54:33 +0530
>
> This patch fixes following coding style warning reported by check patch script,
> in tsl2583 driver:
> - Block comments use a trailing */ on a separate line
>
> Signed-off-by: Bijosh Thykkoottathil <bijosh.t@xxxxxxxxxxx>
> ---
> drivers/staging/iio/light/tsl2583.c | 15 ++++++++++-----
> 1 file changed, 10 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/staging/iio/light/tsl2583.c b/drivers/staging/iio/light/tsl2583.c
> index 3100d96..9159298 100644
> --- a/drivers/staging/iio/light/tsl2583.c
> +++ b/drivers/staging/iio/light/tsl2583.c
> @@ -241,7 +241,8 @@ static int taos_get_lux(struct iio_dev *indio_dev)
> }
>
> /* clear status, really interrupt status (interrupts are off), but
> - * we use the bit anyway - don't forget 0x80 - this is a command*/
> + * we use the bit anyway - don't forget 0x80 - this is a command
> + */
> ret = i2c_smbus_write_byte(chip->client,
> (TSL258X_CMD_REG | TSL258X_CMD_SPL_FN |
> TSL258X_CMD_ALS_INT_CLR));
> @@ -430,7 +431,8 @@ static int taos_chip_on(struct iio_dev *indio_dev)
> chip->als_time_scale = (als_time + 25) / 50;
>
> /* TSL258x Specific power-on / adc enable sequence
> - * Power on the device 1st. */
> + * Power on the device 1st.
> + */
> utmp = TSL258X_CNTL_PWR_ON;
> ret = i2c_smbus_write_byte_data(chip->client,
> TSL258X_CMD_REG | TSL258X_CNTRL, utmp);
> @@ -440,7 +442,8 @@ static int taos_chip_on(struct iio_dev *indio_dev)
> }
>
> /* Use the following shadow copy for our delay before enabling ADC.
> - * Write all the registers. */
> + * Write all the registers.
> + */
> for (i = 0, uP = chip->taos_config; i < TSL258X_REG_MAX; i++) {
> ret = i2c_smbus_write_byte_data(chip->client,
> TSL258X_CMD_REG + i,
> @@ -454,7 +457,8 @@ static int taos_chip_on(struct iio_dev *indio_dev)
>
> usleep_range(3000, 3500);
> /* NOW enable the ADC
> - * initialize the desired mode of operation */
> + * initialize the desired mode of operation
> + */
> utmp = TSL258X_CNTL_PWR_ON | TSL258X_CNTL_ADC_ENBL;
> ret = i2c_smbus_write_byte_data(chip->client,
> TSL258X_CMD_REG | TSL258X_CNTRL,
> @@ -696,7 +700,8 @@ static ssize_t taos_luxtable_show(struct device *dev,
> taos_device_lux[i].ch1);
> if (taos_device_lux[i].ratio == 0) {
> /* We just printed the first "0" entry.
> - * Now get rid of the extra "," and break. */
> + * Now get rid of the extra "," and break.
> + */
> offset--;
> break;
> }
> --
> 2.1.4
>
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
