The PLL_CTRL fields have common defines for several PLL control registers and re-defining the same values per register is not needed. Signed-off-by: Mike Rapoport <mike.rapoport@xxxxxxxxx> --- drivers/staging/sm750fb/ddk750_reg.h | 64 ------------------------------------ 1 file changed, 64 deletions(-) diff --git a/drivers/staging/sm750fb/ddk750_reg.h b/drivers/staging/sm750fb/ddk750_reg.h index 52d270d..ac3cb36 100644 --- a/drivers/staging/sm750fb/ddk750_reg.h +++ b/drivers/staging/sm750fb/ddk750_reg.h @@ -535,80 +535,16 @@ #define PLL_CTRL_M_MASK 0xff #define CRT_PLL_CTRL 0x000060 -#define CRT_PLL_CTRL_BYPASS 18:18 -#define CRT_PLL_CTRL_BYPASS_OFF 0 -#define CRT_PLL_CTRL_BYPASS_ON 1 -#define CRT_PLL_CTRL_POWER 17:17 -#define CRT_PLL_CTRL_POWER_OFF 0 -#define CRT_PLL_CTRL_POWER_ON 1 -#define CRT_PLL_CTRL_INPUT 16:16 -#define CRT_PLL_CTRL_INPUT_OSC 0 -#define CRT_PLL_CTRL_INPUT_TESTCLK 1 -#ifdef VALIDATION_CHIP - #define CRT_PLL_CTRL_OD 15:14 -#else - #define CRT_PLL_CTRL_POD 15:14 - #define CRT_PLL_CTRL_OD 13:12 -#endif -#define CRT_PLL_CTRL_N 11:8 -#define CRT_PLL_CTRL_M 7:0 #define VGA_PLL0_CTRL 0x000064 -#define VGA_PLL0_CTRL_BYPASS 18:18 -#define VGA_PLL0_CTRL_BYPASS_OFF 0 -#define VGA_PLL0_CTRL_BYPASS_ON 1 -#define VGA_PLL0_CTRL_POWER 17:17 -#define VGA_PLL0_CTRL_POWER_OFF 0 -#define VGA_PLL0_CTRL_POWER_ON 1 -#define VGA_PLL0_CTRL_INPUT 16:16 -#define VGA_PLL0_CTRL_INPUT_OSC 0 -#define VGA_PLL0_CTRL_INPUT_TESTCLK 1 -#ifdef VALIDATION_CHIP - #define VGA_PLL0_CTRL_OD 15:14 -#else - #define VGA_PLL0_CTRL_POD 15:14 - #define VGA_PLL0_CTRL_OD 13:12 -#endif -#define VGA_PLL0_CTRL_N 11:8 -#define VGA_PLL0_CTRL_M 7:0 #define VGA_PLL1_CTRL 0x000068 -#define VGA_PLL1_CTRL_BYPASS 18:18 -#define VGA_PLL1_CTRL_BYPASS_OFF 0 -#define VGA_PLL1_CTRL_BYPASS_ON 1 -#define VGA_PLL1_CTRL_POWER 17:17 -#define VGA_PLL1_CTRL_POWER_OFF 0 -#define VGA_PLL1_CTRL_POWER_ON 1 -#define VGA_PLL1_CTRL_INPUT 16:16 -#define VGA_PLL1_CTRL_INPUT_OSC 0 -#define VGA_PLL1_CTRL_INPUT_TESTCLK 1 -#ifdef VALIDATION_CHIP - #define VGA_PLL1_CTRL_OD 15:14 -#else - #define VGA_PLL1_CTRL_POD 15:14 - #define VGA_PLL1_CTRL_OD 13:12 -#endif -#define VGA_PLL1_CTRL_N 11:8 -#define VGA_PLL1_CTRL_M 7:0 #define SCRATCH_DATA 0x00006c #ifndef VALIDATION_CHIP #define MXCLK_PLL_CTRL 0x000070 -#define MXCLK_PLL_CTRL_BYPASS 18:18 -#define MXCLK_PLL_CTRL_BYPASS_OFF 0 -#define MXCLK_PLL_CTRL_BYPASS_ON 1 -#define MXCLK_PLL_CTRL_POWER 17:17 -#define MXCLK_PLL_CTRL_POWER_OFF 0 -#define MXCLK_PLL_CTRL_POWER_ON 1 -#define MXCLK_PLL_CTRL_INPUT 16:16 -#define MXCLK_PLL_CTRL_INPUT_OSC 0 -#define MXCLK_PLL_CTRL_INPUT_TESTCLK 1 -#define MXCLK_PLL_CTRL_POD 15:14 -#define MXCLK_PLL_CTRL_OD 13:12 -#define MXCLK_PLL_CTRL_N 11:8 -#define MXCLK_PLL_CTRL_M 7:0 #define VGA_CONFIGURATION 0x000088 #define VGA_CONFIGURATION_USER_DEFINE 5:4 -- 1.9.1 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
