Replace non standard meas_conf attribute with the standard IIO
calibbias attribute.
API for setting bias measurement configuration:
0 - Normal measurement configuration (default): In normal measurement
configuration the device follows normal measurement flow. Pins BP
and BN are left floating and high impedance.
1 - Positive bias configuration: In positive bias configuration, a
positive current is forced across the resistive load on pins BP
and BN.
2 - Negative bias configuration. In negative bias configuration, a
negative current is forced across the resistive load on pins BP
and BN.
3 - Only available on HMC5983. Magnetic sensor is disabled.
Temperature sensor is enabled.
With this in place, we can think of moving this driver out of staging.
Signed-off-by: Cristina Moraru <cristina.moraru09@xxxxxxxxx>
---
drivers/staging/iio/magnetometer/hmc5843_core.c | 62 +++++++------------------
1 file changed, 16 insertions(+), 46 deletions(-)
diff --git a/drivers/staging/iio/magnetometer/hmc5843_core.c b/drivers/staging/iio/magnetometer/hmc5843_core.c
index 4aab022..c5f16da 100644
--- a/drivers/staging/iio/magnetometer/hmc5843_core.c
+++ b/drivers/staging/iio/magnetometer/hmc5843_core.c
@@ -205,50 +205,6 @@ static int hmc5843_set_meas_conf(struct hmc5843_data *data, u8 meas_conf)
}
static
-ssize_t hmc5843_show_measurement_configuration(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct hmc5843_data *data = iio_priv(dev_to_iio_dev(dev));
- unsigned int val;
- int ret;
-
- ret = regmap_read(data->regmap, HMC5843_CONFIG_REG_A, &val);
- if (ret)
- return ret;
- val &= HMC5843_MEAS_CONF_MASK;
-
- return sprintf(buf, "%d\n", val);
-}
-
-static
-ssize_t hmc5843_set_measurement_configuration(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct hmc5843_data *data = iio_priv(dev_to_iio_dev(dev));
- unsigned long meas_conf = 0;
- int ret;
-
- ret = kstrtoul(buf, 10, &meas_conf);
- if (ret)
- return ret;
- if (meas_conf >= HMC5843_MEAS_CONF_MASK)
- return -EINVAL;
-
- ret = hmc5843_set_meas_conf(data, meas_conf);
-
- return (ret < 0) ? ret : count;
-}
-
-static IIO_DEVICE_ATTR(meas_conf,
- S_IWUSR | S_IRUGO,
- hmc5843_show_measurement_configuration,
- hmc5843_set_measurement_configuration,
- 0);
-
-static
ssize_t hmc5843_show_samp_freq_avail(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -371,6 +327,13 @@ static int hmc5843_read_raw(struct iio_dev *indio_dev,
*val = data->variant->regval_to_samp_freq[rval][0];
*val2 = data->variant->regval_to_samp_freq[rval][1];
return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_CHAN_INFO_CALIBBIAS:
+ ret = regmap_read(data->regmap, HMC5843_CONFIG_REG_A, &rval);
+ if (ret)
+ return ret;
+ rval &= HMC5843_MEAS_CONF_MASK;
+ *val = rval;
+ return IIO_VAL_INT;
}
return -EINVAL;
}
@@ -395,6 +358,11 @@ static int hmc5843_write_raw(struct iio_dev *indio_dev,
return -EINVAL;
return hmc5843_set_range_gain(data, range);
+ case IIO_CHAN_INFO_CALIBBIAS:
+ if (val >= HMC5843_MEAS_CONF_MASK)
+ return -EINVAL;
+
+ return hmc5843_set_meas_conf(data, val);
default:
return -EINVAL;
}
@@ -409,6 +377,8 @@ static int hmc5843_write_raw_get_fmt(struct iio_dev *indio_dev,
return IIO_VAL_INT_PLUS_MICRO;
case IIO_CHAN_INFO_SCALE:
return IIO_VAL_INT_PLUS_NANO;
+ case IIO_CHAN_INFO_CALIBBIAS:
+ return IIO_VAL_INT;
default:
return -EINVAL;
}
@@ -451,7 +421,8 @@ done:
.channel2 = IIO_MOD_##axis, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
- BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+ BIT(IIO_CHAN_INFO_CALIBBIAS), \
.scan_index = idx, \
.scan_type = { \
.sign = 's', \
@@ -477,7 +448,6 @@ static const struct iio_chan_spec hmc5883_channels[] = {
};
static struct attribute *hmc5843_attributes[] = {
- &iio_dev_attr_meas_conf.dev_attr.attr,
&iio_dev_attr_scale_available.dev_attr.attr,
&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
NULL
--
1.9.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
