This change adds support for the IOCrest WCH382 dual serial PCIe card. LSPCI: ----- 03:00.0 Serial controller: Device 1c00:3253 (rev 10) (prog-if 05 [16850]) Subsystem: Device 1c00:3253 Flags: fast devsel, IRQ 16 I/O ports at 2000 [size=256] Memory at c0000000 (32-bit, prefetchable) [size=32K] I/O ports at 2100 [size=4] Expansion ROM at aa000000 [disabled] [size=32K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/32 Maskable+ 64bit+ Capabilities: [80] Express Legacy Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Unfortunately I couldn't find the vendor's refrence manuals. All I could find where pointers to this: http://www.wch-ic.com/download/list.asp?id=126 but that link is dead. If someone has a copy of the reference sheet / programmers guide for this I would greatly appreciate it sent my way. Testing: -verified minicom can communicate a various speeds using each RS-232 port through a NULL modem cable. -grub serial doesn't seem to work, but I didn't really dig into it. -kernel boot console works, which is the only thing I was after. -Link to the one I used: http://www.iocrest.com/en/product_details276.html Jeremy McNicoll (1): tty: Add support for PCIe WCH382 2S multi-IO card drivers/tty/serial/8250/8250_pci.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) -- 2.6.1 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
