This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.
Signed-off-by: Priit Laes <plaes@xxxxxxxxx>
---
drivers/staging/fbtft/fb_s6d02a1.c | 42 +++++++++++++++++++++-----------------
1 file changed, 23 insertions(+), 19 deletions(-)
diff --git a/drivers/staging/fbtft/fb_s6d02a1.c b/drivers/staging/fbtft/fb_s6d02a1.c
index da85057..3113355 100644
--- a/drivers/staging/fbtft/fb_s6d02a1.c
+++ b/drivers/staging/fbtft/fb_s6d02a1.c
@@ -18,6 +18,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <video/mipi_display.h>
#include "fbtft.h"
@@ -50,7 +51,7 @@ static int default_init_sequence[] = {
-1, 0xf3, 0x00, 0x00,
- -1, 0x11,
+ -1, MIPI_DCS_EXIT_SLEEP_MODE,
-2, 50,
-1, 0xf3, 0x00, 0x01,
@@ -79,18 +80,18 @@ static int default_init_sequence[] = {
/* initializing sequence */
- -1, 0x36, 0x08,
+ -1, MIPI_DCS_SET_ADDRESS_MODE, 0x08,
- -1, 0x35, 0x00,
+ -1, MIPI_DCS_SET_TEAR_ON, 0x00,
- -1, 0x3a, 0x05,
+ -1, MIPI_DCS_SET_PIXEL_FORMAT, 0x05,
- /* gamma setting sequence */
- -1, 0x26, 0x01, /* preset gamma curves, possible values 0x01, 0x02, 0x04, 0x08 */
+ /* gamma setting - possible values 0x01, 0x02, 0x04, 0x08 */
+ -1, MIPI_DCS_SET_GAMMA_CURVE, 0x01,
-2, 150,
- -1, 0x29,
- -1, 0x2c,
+ -1, MIPI_DCS_SET_DISPLAY_ON,
+ -1, MIPI_DCS_WRITE_MEMORY_START,
/* end marker */
-3
@@ -98,14 +99,13 @@ static int default_init_sequence[] = {
static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
{
- /* Column address */
- write_reg(par, 0x2A, xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
+ write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
+ xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
- /* Row address */
- write_reg(par, 0x2B, ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
+ write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
+ ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
- /* Memory write */
- write_reg(par, 0x2C);
+ write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
}
#define MY BIT(7)
@@ -113,7 +113,7 @@ static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
#define MV BIT(5)
static int set_var(struct fbtft_par *par)
{
- /* MADCTL - Memory data access control
+ /* Memory data access control (0x36h)
RGB/BGR:
1. Mode selection pin SRGB
RGB H/W pin for color filter setting: 0=RGB, 1=BGR
@@ -121,16 +121,20 @@ static int set_var(struct fbtft_par *par)
RGB-BGR ORDER color filter panel: 0=RGB, 1=BGR */
switch (par->info->var.rotate) {
case 0:
- write_reg(par, 0x36, MX | MY | (par->bgr << 3));
+ write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+ MX | MY | (par->bgr << 3));
break;
case 270:
- write_reg(par, 0x36, MY | MV | (par->bgr << 3));
+ write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+ MY | MV | (par->bgr << 3));
break;
case 180:
- write_reg(par, 0x36, par->bgr << 3);
+ write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+ par->bgr << 3);
break;
case 90:
- write_reg(par, 0x36, MX | MV | (par->bgr << 3));
+ write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+ MX | MV | (par->bgr << 3));
break;
}
--
2.6.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
