[PATCH] Staging: fbtft: Removed commented out/dead code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Deleted various commented out lines that have been replaced by write_reg()

Signed-off-by: Ben Gilbert <gillie59978@xxxxxxxxx>
---
 drivers/staging/fbtft/fb_uc1701.c | 27 ++-------------------------
 1 file changed, 2 insertions(+), 25 deletions(-)

diff --git a/drivers/staging/fbtft/fb_uc1701.c b/drivers/staging/fbtft/fb_uc1701.c
index 212908e..b78045f 100644
--- a/drivers/staging/fbtft/fb_uc1701.c
+++ b/drivers/staging/fbtft/fb_uc1701.c
@@ -78,11 +78,11 @@ static int init_display(struct fbtft_par *par)
 	mdelay(10);
 
 	/* set startpoint */
-	/* LCD_START_LINE | (pos & 0x3F) */
 	write_reg(par, LCD_START_LINE);
 
 	/* select orientation BOTTOMVIEW */
 	write_reg(par, LCD_BOTTOMVIEW | 1);
+
 	/* output mode select (turns display upside-down) */
 	write_reg(par, LCD_SCAN_DIR | 0x00);
 
@@ -96,20 +96,14 @@ static int init_display(struct fbtft_par *par)
 	write_reg(par, LCD_BIAS | 0);
 
 	/* power control mode: all features on */
-	/* LCD_POWER_CONTROL | (val&0x07) */
 	write_reg(par, LCD_POWER_CONTROL | 0x07);
 
 	/* set voltage regulator R/R */
-	/* LCD_VOLTAGE | (val&0x07) */
 	write_reg(par, LCD_VOLTAGE | 0x07);
 
 	/* volume mode set */
-	/* LCD_VOLUME_MODE,val&0x3f,LCD_NO_OP */
 	write_reg(par, LCD_VOLUME_MODE);
-	/* LCD_VOLUME_MODE,val&0x3f,LCD_NO_OP */
 	write_reg(par, 0x09);
-	/* ???? */
-	/* LCD_VOLUME_MODE,val&0x3f,LCD_NO_OP */
 	write_reg(par, LCD_NO_OP);
 
 	/* advanced program control */
@@ -125,17 +119,8 @@ static int init_display(struct fbtft_par *par)
 static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 {
 	/* goto address */
-	/* LCD_PAGE_ADDRESS | ((page) & 0x1F),
-	 (((col)+SHIFT_ADDR_NORMAL) & 0x0F),
-	 LCD_COL_ADDRESS | ((((col)+SHIFT_ADDR_NORMAL)>>4) & 0x0F) */
 	write_reg(par, LCD_PAGE_ADDRESS);
-	/* LCD_PAGE_ADDRESS | ((page) & 0x1F),
-	 (((col)+SHIFT_ADDR_NORMAL) & 0x0F),
-	  LCD_COL_ADDRESS | ((((col)+SHIFT_ADDR_NORMAL)>>4) & 0x0F) */
 	write_reg(par, 0x00);
-	/* LCD_PAGE_ADDRESS | ((page) & 0x1F),
-	 (((col)+SHIFT_ADDR_NORMAL) & 0x0F),
-	  LCD_COL_ADDRESS | ((((col)+SHIFT_ADDR_NORMAL)>>4) & 0x0F) */
 	write_reg(par, LCD_COL_ADDRESS);
 }
 
@@ -156,17 +141,9 @@ static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
 					 1 : 0) << i;
 			buf++;
 		}
-		/* LCD_PAGE_ADDRESS | ((page) & 0x1F),
-		 (((col)+SHIFT_ADDR_NORMAL) & 0x0F),
-		  LCD_COL_ADDRESS | ((((col)+SHIFT_ADDR_NORMAL)>>4) & 0x0F) */
+
 		write_reg(par, LCD_PAGE_ADDRESS | (u8)y);
-		/* LCD_PAGE_ADDRESS | ((page) & 0x1F),
-		 (((col)+SHIFT_ADDR_NORMAL) & 0x0F),
-		  LCD_COL_ADDRESS | ((((col)+SHIFT_ADDR_NORMAL)>>4) & 0x0F) */
 		write_reg(par, 0x00);
-		/* LCD_PAGE_ADDRESS | ((page) & 0x1F),
-		 (((col)+SHIFT_ADDR_NORMAL) & 0x0F),
-		  LCD_COL_ADDRESS | ((((col)+SHIFT_ADDR_NORMAL)>>4) & 0x0F) */
 		write_reg(par, LCD_COL_ADDRESS);
 		gpio_set_value(par->gpio.dc, 1);
 		ret = par->fbtftops.write(par, par->txbuf.buf, WIDTH);
-- 
1.9.1

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux