This patch moves all the codes in linux_wlan_spi.c to wilc_spi.c to make
one spi module. Make wilc_spi_tx, wilc_spi_rx and wilc_spi_tx_rx static
functions. Remove function declaration in linux_wlan_spi.h, which is unnedded
now. No modification has been made inside the codes.
linux_wlan_spi.[ch] will be remove in the next patch.
Signed-off-by: Glen Lee <glen.lee@xxxxxxxxx>
---
drivers/staging/wilc1000/linux_wlan_spi.c | 165 ---------------------------
drivers/staging/wilc1000/linux_wlan_spi.h | 4 -
drivers/staging/wilc1000/wilc_spi.c | 180 +++++++++++++++++++++++++++++-
3 files changed, 178 insertions(+), 171 deletions(-)
diff --git a/drivers/staging/wilc1000/linux_wlan_spi.c b/drivers/staging/wilc1000/linux_wlan_spi.c
index 06935cf..c4315f5 100644
--- a/drivers/staging/wilc1000/linux_wlan_spi.c
+++ b/drivers/staging/wilc1000/linux_wlan_spi.c
@@ -14,168 +14,3 @@
#include "wilc_wfi_netdevice.h"
#include "linux_wlan_common.h"
#include "wilc_wlan_if.h"
-
-#define USE_SPI_DMA 0
-
-static const struct wilc1000_ops wilc1000_spi_ops;
-
-static int wilc_bus_probe(struct spi_device *spi)
-{
- int ret, gpio;
- struct wilc *wilc;
-
- gpio = of_get_gpio(spi->dev.of_node, 0);
- if (gpio < 0)
- gpio = GPIO_NUM;
-
- ret = wilc_netdev_init(&wilc, NULL, HIF_SPI, GPIO_NUM, &wilc_hif_spi);
- if (ret)
- return ret;
-
- spi_set_drvdata(spi, wilc);
- wilc->dev = &spi->dev;
-
- return 0;
-}
-
-static int wilc_bus_remove(struct spi_device *spi)
-{
- wilc_netdev_cleanup(spi_get_drvdata(spi));
- return 0;
-}
-
-static const struct of_device_id wilc1000_of_match[] = {
- { .compatible = "atmel,wilc_spi", },
- {}
-};
-MODULE_DEVICE_TABLE(of, wilc1000_of_match);
-
-struct spi_driver wilc1000_spi_driver = {
- .driver = {
- .name = MODALIAS,
- .of_match_table = wilc1000_of_match,
- },
- .probe = wilc_bus_probe,
- .remove = wilc_bus_remove,
-};
-module_spi_driver(wilc1000_spi_driver);
-MODULE_LICENSE("GPL");
-
-int wilc_spi_tx(struct wilc *wilc, u8 *b, u32 len)
-{
- struct spi_device *spi = to_spi_device(wilc->dev);
- int ret;
- struct spi_message msg;
-
- if (len > 0 && b) {
- struct spi_transfer tr = {
- .tx_buf = b,
- .len = len,
- .delay_usecs = 0,
- };
- char *r_buffer = kzalloc(len, GFP_KERNEL);
-
- if (!r_buffer)
- return -ENOMEM;
-
- tr.rx_buf = r_buffer;
- dev_dbg(&spi->dev, "Request writing %d bytes\n", len);
-
- memset(&msg, 0, sizeof(msg));
- spi_message_init(&msg);
- msg.spi = spi;
- msg.is_dma_mapped = USE_SPI_DMA;
- spi_message_add_tail(&tr, &msg);
-
- ret = spi_sync(spi, &msg);
- if (ret < 0)
- dev_err(&spi->dev, "SPI transaction failed\n");
-
- kfree(r_buffer);
- } else {
- dev_err(&spi->dev,
- "can't write data with the following length: %d\n",
- len);
- dev_err(&spi->dev,
- "FAILED due to NULL buffer or ZERO length check the following length: %d\n",
- len);
- ret = -EINVAL;
- }
-
- return ret;
-}
-
-int wilc_spi_rx(struct wilc *wilc, u8 *rb, u32 rlen)
-{
- struct spi_device *spi = to_spi_device(wilc->dev);
- int ret;
-
- if (rlen > 0) {
- struct spi_message msg;
- struct spi_transfer tr = {
- .rx_buf = rb,
- .len = rlen,
- .delay_usecs = 0,
-
- };
- char *t_buffer = kzalloc(rlen, GFP_KERNEL);
-
- if (!t_buffer)
- return -ENOMEM;
-
- tr.tx_buf = t_buffer;
-
- memset(&msg, 0, sizeof(msg));
- spi_message_init(&msg);
- msg.spi = spi;
- msg.is_dma_mapped = USE_SPI_DMA;
- spi_message_add_tail(&tr, &msg);
-
- ret = spi_sync(spi, &msg);
- if (ret < 0)
- dev_err(&spi->dev, "SPI transaction failed\n");
- kfree(t_buffer);
- } else {
- dev_err(&spi->dev,
- "can't read data with the following length: %u\n",
- rlen);
- ret = -EINVAL;
- }
-
- return ret;
-}
-
-int wilc_spi_tx_rx(struct wilc *wilc, u8 *wb, u8 *rb, u32 rlen)
-{
- struct spi_device *spi = to_spi_device(wilc->dev);
- int ret;
-
- if (rlen > 0) {
- struct spi_message msg;
- struct spi_transfer tr = {
- .rx_buf = rb,
- .tx_buf = wb,
- .len = rlen,
- .bits_per_word = 8,
- .delay_usecs = 0,
-
- };
-
- memset(&msg, 0, sizeof(msg));
- spi_message_init(&msg);
- msg.spi = spi;
- msg.is_dma_mapped = USE_SPI_DMA;
-
- spi_message_add_tail(&tr, &msg);
- ret = spi_sync(spi, &msg);
- if (ret < 0)
- dev_err(&spi->dev, "SPI transaction failed\n");
- } else {
- dev_err(&spi->dev,
- "can't read data with the following length: %u\n",
- rlen);
- ret = -EINVAL;
- }
-
- return ret;
-}
diff --git a/drivers/staging/wilc1000/linux_wlan_spi.h b/drivers/staging/wilc1000/linux_wlan_spi.h
index d41c16a..32e3926 100644
--- a/drivers/staging/wilc1000/linux_wlan_spi.h
+++ b/drivers/staging/wilc1000/linux_wlan_spi.h
@@ -3,8 +3,4 @@
#include <linux/spi/spi.h>
#include "wilc_wfi_netdevice.h"
-
-int wilc_spi_tx(struct wilc *wilc, u8 *b, u32 len);
-int wilc_spi_rx(struct wilc *wilc, u8 *rb, u32 rlen);
-int wilc_spi_tx_rx(struct wilc *wilc, u8 *wb, u8 *rb, u32 rlen);
#endif
diff --git a/drivers/staging/wilc1000/wilc_spi.c b/drivers/staging/wilc1000/wilc_spi.c
index 0f730cd..86de50c 100644
--- a/drivers/staging/wilc1000/wilc_spi.c
+++ b/drivers/staging/wilc1000/wilc_spi.c
@@ -6,11 +6,22 @@
/* */
/* */
/* //////////////////////////////////////////////////////////////////////////// */
-
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/cdev.h>
+#include <linux/uaccess.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/of_gpio.h>
+
+#include "linux_wlan_common.h"
#include <linux/string.h>
#include "wilc_wlan_if.h"
#include "wilc_wlan.h"
-#include "linux_wlan_spi.h"
#include "wilc_wfi_netdevice.h"
typedef struct {
@@ -107,6 +118,171 @@ static u8 crc7(u8 crc, const u8 *buffer, u32 len)
#define DATA_PKT_SZ_8K (8 * 1024)
#define DATA_PKT_SZ DATA_PKT_SZ_8K
+#define USE_SPI_DMA 0
+
+static const struct wilc1000_ops wilc1000_spi_ops;
+
+static int wilc_bus_probe(struct spi_device *spi)
+{
+ int ret, gpio;
+ struct wilc *wilc;
+
+ gpio = of_get_gpio(spi->dev.of_node, 0);
+ if (gpio < 0)
+ gpio = GPIO_NUM;
+
+ ret = wilc_netdev_init(&wilc, NULL, HIF_SPI, GPIO_NUM, &wilc_hif_spi);
+ if (ret)
+ return ret;
+
+ spi_set_drvdata(spi, wilc);
+ wilc->dev = &spi->dev;
+
+ return 0;
+}
+
+static int wilc_bus_remove(struct spi_device *spi)
+{
+ wilc_netdev_cleanup(spi_get_drvdata(spi));
+ return 0;
+}
+
+static const struct of_device_id wilc1000_of_match[] = {
+ { .compatible = "atmel,wilc_spi", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, wilc1000_of_match);
+
+struct spi_driver wilc1000_spi_driver = {
+ .driver = {
+ .name = MODALIAS,
+ .of_match_table = wilc1000_of_match,
+ },
+ .probe = wilc_bus_probe,
+ .remove = wilc_bus_remove,
+};
+module_spi_driver(wilc1000_spi_driver);
+MODULE_LICENSE("GPL");
+
+static int wilc_spi_tx(struct wilc *wilc, u8 *b, u32 len)
+{
+ struct spi_device *spi = to_spi_device(wilc->dev);
+ int ret;
+ struct spi_message msg;
+
+ if (len > 0 && b) {
+ struct spi_transfer tr = {
+ .tx_buf = b,
+ .len = len,
+ .delay_usecs = 0,
+ };
+ char *r_buffer = kzalloc(len, GFP_KERNEL);
+
+ if (!r_buffer)
+ return -ENOMEM;
+
+ tr.rx_buf = r_buffer;
+ dev_dbg(&spi->dev, "Request writing %d bytes\n", len);
+
+ memset(&msg, 0, sizeof(msg));
+ spi_message_init(&msg);
+ msg.spi = spi;
+ msg.is_dma_mapped = USE_SPI_DMA;
+ spi_message_add_tail(&tr, &msg);
+
+ ret = spi_sync(spi, &msg);
+ if (ret < 0)
+ dev_err(&spi->dev, "SPI transaction failed\n");
+
+ kfree(r_buffer);
+ } else {
+ dev_err(&spi->dev,
+ "can't write data with the following length: %d\n",
+ len);
+ dev_err(&spi->dev,
+ "FAILED due to NULL buffer or ZERO length check the following length: %d\n",
+ len);
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static int wilc_spi_rx(struct wilc *wilc, u8 *rb, u32 rlen)
+{
+ struct spi_device *spi = to_spi_device(wilc->dev);
+ int ret;
+
+ if (rlen > 0) {
+ struct spi_message msg;
+ struct spi_transfer tr = {
+ .rx_buf = rb,
+ .len = rlen,
+ .delay_usecs = 0,
+
+ };
+ char *t_buffer = kzalloc(rlen, GFP_KERNEL);
+
+ if (!t_buffer)
+ return -ENOMEM;
+
+ tr.tx_buf = t_buffer;
+
+ memset(&msg, 0, sizeof(msg));
+ spi_message_init(&msg);
+ msg.spi = spi;
+ msg.is_dma_mapped = USE_SPI_DMA;
+ spi_message_add_tail(&tr, &msg);
+
+ ret = spi_sync(spi, &msg);
+ if (ret < 0)
+ dev_err(&spi->dev, "SPI transaction failed\n");
+ kfree(t_buffer);
+ } else {
+ dev_err(&spi->dev,
+ "can't read data with the following length: %u\n",
+ rlen);
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static int wilc_spi_tx_rx(struct wilc *wilc, u8 *wb, u8 *rb, u32 rlen)
+{
+ struct spi_device *spi = to_spi_device(wilc->dev);
+ int ret;
+
+ if (rlen > 0) {
+ struct spi_message msg;
+ struct spi_transfer tr = {
+ .rx_buf = rb,
+ .tx_buf = wb,
+ .len = rlen,
+ .bits_per_word = 8,
+ .delay_usecs = 0,
+
+ };
+
+ memset(&msg, 0, sizeof(msg));
+ spi_message_init(&msg);
+ msg.spi = spi;
+ msg.is_dma_mapped = USE_SPI_DMA;
+
+ spi_message_add_tail(&tr, &msg);
+ ret = spi_sync(spi, &msg);
+ if (ret < 0)
+ dev_err(&spi->dev, "SPI transaction failed\n");
+ } else {
+ dev_err(&spi->dev,
+ "can't read data with the following length: %u\n",
+ rlen);
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
u8 clockless)
{
--
1.9.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
