The SPI and SDIO specific code is now separate enough that
we just need to restructure the Makefile and Kconfig logic
a bit and export a couple of symbols from the common module
to have separate bus glue drivers.
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
drivers/staging/wilc1000/Kconfig | 66 ++++++++++++++-------------------
drivers/staging/wilc1000/Makefile | 7 +++-
drivers/staging/wilc1000/linux_wlan.c | 4 ++
drivers/staging/wilc1000/wilc_debugfs.c | 2 +
drivers/staging/wilc1000/wilc_wlan.c | 1 +
5 files changed, 40 insertions(+), 40 deletions(-)
diff --git a/drivers/staging/wilc1000/Kconfig b/drivers/staging/wilc1000/Kconfig
index ee51b4278088..2923122346ef 100644
--- a/drivers/staging/wilc1000/Kconfig
+++ b/drivers/staging/wilc1000/Kconfig
@@ -1,41 +1,12 @@
-config WILC1000_DRIVER
- bool "WILC1000 support (WiFi only)"
- depends on CFG80211 && WEXT_CORE && INET
- ---help---
- This module only support IEEE 802.11n WiFi.
-
-if WILC1000_DRIVER
-
config WILC1000
tristate
-
-choice
- prompt "Memory Allocation"
- default WILC1000_PREALLOCATE_AT_LOADING_DRIVER
-
-config WILC1000_PREALLOCATE_AT_LOADING_DRIVER
- bool "Preallocate memory at loading driver"
+ select WIRELESS_EXT
---help---
- This choice supports static allocation of the memory
- for the receive buffer. The driver will allocate the RX buffer
- during initial time. The driver will also free the buffer
- by calling network device stop.
-
-config WILC1000_DYNAMICALLY_ALLOCATE_MEMROY
- bool "Dynamically allocate memory in real time"
- ---help---
- This choice supports dynamic allocation of the memory
- for the receive buffer. The driver will allocate the RX buffer
- when it is required.
-endchoice
-
-choice
- prompt "Bus Type"
- default WILC1000_SDIO
+ This module only support IEEE 802.11n WiFi.
config WILC1000_SDIO
- bool "SDIO support"
- depends on MMC
+ tristate "Atmel WILC1000 SDIO (WiFi only)"
+ depends on CFG80211 && INET && MMC
select WILC1000
---help---
This module adds support for the SDIO interface of adapters using
@@ -48,9 +19,9 @@ config WILC1000_SDIO
this if your platform is using the SDIO bus.
config WILC1000_SPI
- depends on SPI
+ tristate "Atmel WILC1000 SPI (WiFi only)"
+ depends on CFG80211 && INET && SPI
select WILC1000
- bool "SPI support"
---help---
This module adds support for the SPI interface of adapters using
WILC1000 chipset. The Atmel WILC1000 has a Serial Peripheral
@@ -59,10 +30,31 @@ config WILC1000_SPI
full-duplex slave synchronous serial interface that is available
immediately following reset when pin 9 (SDIO_SPI_CFG) is tied to
VDDIO. Select this if your platform is using the SPI bus.
+
+choice
+ prompt "WILC1000 Memory Allocation"
+ depends on WILC1000
+ default WILC1000_PREALLOCATE_AT_LOADING_DRIVER
+
+config WILC1000_PREALLOCATE_AT_LOADING_DRIVER
+ bool "Preallocate memory at loading driver"
+ ---help---
+ This choice supports static allocation of the memory
+ for the receive buffer. The driver will allocate the RX buffer
+ during initial time. The driver will also free the buffer
+ by calling network device stop.
+
+config WILC1000_DYNAMICALLY_ALLOCATE_MEMROY
+ bool "Dynamically allocate memory in real time"
+ ---help---
+ This choice supports dynamic allocation of the memory
+ for the receive buffer. The driver will allocate the RX buffer
+ when it is required.
endchoice
+
config WILC1000_HW_OOB_INTR
- bool "Use out of band interrupt"
+ bool "WILC1000 out of band interrupt"
depends on WILC1000_SDIO
default n
---help---
@@ -71,5 +63,3 @@ config WILC1000_HW_OOB_INTR
mechanism for SDIO host controllers that don't support SDIO interrupt.
Select this option If the SDIO host controller in your platform
doesn't support SDIO time devision interrupt.
-
-endif
diff --git a/drivers/staging/wilc1000/Makefile b/drivers/staging/wilc1000/Makefile
index dcba27bd3bce..198d536da57c 100644
--- a/drivers/staging/wilc1000/Makefile
+++ b/drivers/staging/wilc1000/Makefile
@@ -21,5 +21,8 @@ wilc1000-objs := wilc_wfi_cfgoperations.o linux_wlan.o linux_mon.o \
wilc_wlan_cfg.o wilc_debugfs.o \
wilc_wlan.o
-wilc1000-$(CONFIG_WILC1000_SDIO) += linux_wlan_sdio.o wilc_sdio.o
-wilc1000-$(CONFIG_WILC1000_SPI) += linux_wlan_spi.o wilc_spi.o
+obj-$(CONFIG_WILC1000_SDIO) += wilc1000-sdio.o
+wilc1000-sdio-objs += linux_wlan_sdio.o wilc_sdio.o
+
+obj-$(CONFIG_WILC1000_SPI) += wilc1000-spi.o
+wilc1000-spi-objs += linux_wlan_spi.o wilc_spi.o
diff --git a/drivers/staging/wilc1000/linux_wlan.c b/drivers/staging/wilc1000/linux_wlan.c
index 1b6e1eec2446..0d6c22ca7920 100644
--- a/drivers/staging/wilc1000/linux_wlan.c
+++ b/drivers/staging/wilc1000/linux_wlan.c
@@ -44,6 +44,8 @@ static struct net_device_stats *mac_stats(struct net_device *dev);
static int mac_ioctl(struct net_device *ndev, struct ifreq *req, int cmd);
static void wilc_set_multicast_list(struct net_device *dev);
struct wilc *wilc_dev;
+EXPORT_SYMBOL_GPL(wilc_dev);
+
bool wilc_enable_ps = true;
static const struct net_device_ops wilc_netdev_ops = {
@@ -1411,6 +1413,7 @@ void wilc_netdev_cleanup(struct wilc *wilc)
wilc_debugfs_remove();
#endif
}
+EXPORT_SYMBOL_GPL(wilc_netdev_cleanup);
int wilc_netdev_init(struct wilc **wilc, struct device *dev, int io_type,
int gpio, const struct wilc_hif_func *ops)
@@ -1487,3 +1490,4 @@ int wilc_netdev_init(struct wilc **wilc, struct device *dev, int io_type,
return 0;
}
+EXPORT_SYMBOL_GPL(wilc_netdev_init);
diff --git a/drivers/staging/wilc1000/wilc_debugfs.c b/drivers/staging/wilc1000/wilc_debugfs.c
index d70f96f475b8..158a1df17195 100644
--- a/drivers/staging/wilc1000/wilc_debugfs.c
+++ b/drivers/staging/wilc1000/wilc_debugfs.c
@@ -27,7 +27,9 @@ static struct dentry *wilc_dir;
#define DBG_REGION_ALL (GENERIC_DBG | HOSTAPD_DBG | HOSTINF_DBG | CORECONFIG_DBG | CFG80211_DBG | INT_DBG | TX_DBG | RX_DBG | LOCK_DBG | INIT_DBG | BUS_DBG | MEM_DBG)
#define DBG_LEVEL_ALL (DEBUG | INFO | WRN | ERR)
atomic_t WILC_REGION = ATOMIC_INIT(INIT_DBG | GENERIC_DBG | CFG80211_DBG | FIRM_DBG | HOSTAPD_DBG);
+EXPORT_SYMBOL_GPL(WILC_REGION);
atomic_t WILC_DEBUG_LEVEL = ATOMIC_INIT(ERR);
+EXPORT_SYMBOL_GPL(WILC_DEBUG_LEVEL);
/*
* --------------------------------------------------------------------------------
diff --git a/drivers/staging/wilc1000/wilc_wlan.c b/drivers/staging/wilc1000/wilc_wlan.c
index f72f976906cc..a71901c22653 100644
--- a/drivers/staging/wilc1000/wilc_wlan.c
+++ b/drivers/staging/wilc1000/wilc_wlan.c
@@ -1181,6 +1181,7 @@ void wilc_handle_isr(void *wilc)
}
release_bus(RELEASE_ALLOW_SLEEP);
}
+EXPORT_SYMBOL_GPL(wilc_handle_isr);
int wilc_wlan_firmware_download(const u8 *buffer, u32 buffer_size)
{
--
2.1.0.rc2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
