[PATCH 06/18] staging/rdma/hfi: Add one-time LCB reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Dean Luick <dean.luick@xxxxxxxxx>

Add one-time LCB reset on driver load to pre-emptively work
around any LCB power cycle issues.

Reviewed-by: Easwar Hariharan <easwar.hariharan@xxxxxxxxx>
Signed-off-by: Dean Luick <dean.luick@xxxxxxxxx>
Signed-off-by: Jubin John <jubin.john@xxxxxxxxx>
---
 drivers/staging/rdma/hfi1/chip.c           |   20 ++++++++++++++++++++
 drivers/staging/rdma/hfi1/chip_registers.h |    3 +++
 2 files changed, 23 insertions(+), 0 deletions(-)

diff --git a/drivers/staging/rdma/hfi1/chip.c b/drivers/staging/rdma/hfi1/chip.c
index a5b3653..be89e37 100644
--- a/drivers/staging/rdma/hfi1/chip.c
+++ b/drivers/staging/rdma/hfi1/chip.c
@@ -5856,6 +5856,23 @@ void init_qsfp(struct hfi1_pportdata *ppd)
 	}
 }
 
+/*
+ * Do a one-time initialize of the LCB block.
+ */
+static void init_lcb(struct hfi1_devdata *dd)
+{
+	/* the DC has been reset earlier in the driver load */
+
+	/* set LCB for cclk loopback on the port */
+	write_csr(dd, DC_LCB_CFG_TX_FIFOS_RESET, 0x01);
+	write_csr(dd, DC_LCB_CFG_LANE_WIDTH, 0x00);
+	write_csr(dd, DC_LCB_CFG_REINIT_AS_SLAVE, 0x00);
+	write_csr(dd, DC_LCB_CFG_CNT_FOR_SKIP_STALL, 0x110);
+	write_csr(dd, DC_LCB_CFG_CLK_CNTR, 0x08);
+	write_csr(dd, DC_LCB_CFG_LOOPBACK, 0x02);
+	write_csr(dd, DC_LCB_CFG_TX_FIFOS_RESET, 0x00);
+}
+
 int bringup_serdes(struct hfi1_pportdata *ppd)
 {
 	struct hfi1_devdata *dd = ppd->dd;
@@ -5877,6 +5894,9 @@ int bringup_serdes(struct hfi1_pportdata *ppd)
 	/* Set linkinit_reason on power up per OPA spec */
 	ppd->linkinit_reason = OPA_LINKINIT_REASON_LINKUP;
 
+	/* one-time init of the LCB */
+	init_lcb(dd);
+
 	if (loopback) {
 		ret = init_loopback(dd);
 		if (ret < 0)
diff --git a/drivers/staging/rdma/hfi1/chip_registers.h b/drivers/staging/rdma/hfi1/chip_registers.h
index bf45de2..21ca8c1 100644
--- a/drivers/staging/rdma/hfi1/chip_registers.h
+++ b/drivers/staging/rdma/hfi1/chip_registers.h
@@ -318,6 +318,9 @@
 #define DC_LCB_CFG_TX_FIFOS_RADR_RST_VAL_SHIFT 0
 #define DC_LCB_CFG_TX_FIFOS_RESET (DC_LCB_CSRS + 0x000000000008)
 #define DC_LCB_CFG_TX_FIFOS_RESET_VAL_SHIFT 0
+#define DC_LCB_CFG_REINIT_AS_SLAVE (DC_LCB_CSRS + 0x000000000030)
+#define DC_LCB_CFG_CNT_FOR_SKIP_STALL (DC_LCB_CSRS + 0x000000000040)
+#define DC_LCB_CFG_CLK_CNTR (DC_LCB_CSRS + 0x000000000110)
 #define DC_LCB_ERR_CLR (DC_LCB_CSRS + 0x000000000308)
 #define DC_LCB_ERR_EN (DC_LCB_CSRS + 0x000000000310)
 #define DC_LCB_ERR_FLG (DC_LCB_CSRS + 0x000000000300)
-- 
1.7.0.7

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux