From: Dean Luick <dean.luick@xxxxxxxxx>
Read an EFI variable for the device description. Create the
infrastructure for additional variable reads.
Reviewed-by: Easwar Hariharan <easwar.hariharan@xxxxxxxxx>
Signed-off-by: Dean Luick <dean.luick@xxxxxxxxx>
Signed-off-by: Jubin John <jubin.john@xxxxxxxxx>
---
drivers/staging/rdma/hfi1/Makefile | 2 +-
drivers/staging/rdma/hfi1/chip.c | 38 ++++++--
drivers/staging/rdma/hfi1/efivar.c | 176 ++++++++++++++++++++++++++++++++++++
drivers/staging/rdma/hfi1/efivar.h | 60 ++++++++++++
4 files changed, 267 insertions(+), 9 deletions(-)
create mode 100644 drivers/staging/rdma/hfi1/efivar.c
create mode 100644 drivers/staging/rdma/hfi1/efivar.h
diff --git a/drivers/staging/rdma/hfi1/Makefile b/drivers/staging/rdma/hfi1/Makefile
index 2e5daa6..68c5a31 100644
--- a/drivers/staging/rdma/hfi1/Makefile
+++ b/drivers/staging/rdma/hfi1/Makefile
@@ -7,7 +7,7 @@
#
obj-$(CONFIG_INFINIBAND_HFI1) += hfi1.o
-hfi1-y := chip.o cq.o device.o diag.o dma.o driver.o eprom.o file_ops.o firmware.o \
+hfi1-y := chip.o cq.o device.o diag.o dma.o driver.o efivar.o eprom.o file_ops.o firmware.o \
init.o intr.o keys.o mad.o mmap.o mr.o pcie.o pio.o pio_copy.o \
qp.o qsfp.o rc.o ruc.o sdma.o srq.o sysfs.o trace.o twsi.o \
uc.o ud.o user_pages.o user_sdma.o verbs_mcast.o verbs.o
diff --git a/drivers/staging/rdma/hfi1/chip.c b/drivers/staging/rdma/hfi1/chip.c
index 15ae4c9..dcaa61c 100644
--- a/drivers/staging/rdma/hfi1/chip.c
+++ b/drivers/staging/rdma/hfi1/chip.c
@@ -63,6 +63,7 @@
#include "pio.h"
#include "sdma.h"
#include "eprom.h"
+#include "efivar.h"
#define NUM_IB_PORTS 1
@@ -10524,6 +10525,32 @@ static void asic_should_init(struct hfi1_devdata *dd)
spin_unlock_irqrestore(&hfi1_devs_lock, flags);
}
+/*
+ * Set dd->boardname. Use a generic name if a name is not returned from
+ * EFI variable space.
+ *
+ * Return 0 on success, -ENOMEM if space could not be allocated.
+ */
+static int obtain_boardname(struct hfi1_devdata *dd)
+{
+ /* generic board description */
+ const char generic[] =
+ "Intel Omni-Path Host Fabric Interface Adapter 100 Series";
+ unsigned long size;
+ int ret;
+
+ ret = read_hfi1_efi_var(dd, "description", &size,
+ (void **)&dd->boardname);
+ if (ret) {
+ dd_dev_err(dd, "Board description not found\n");
+ /* use generic description */
+ dd->boardname = kstrdup(generic, GFP_KERNEL);
+ if (!dd->boardname)
+ return -ENOMEM;
+ }
+ return 0;
+}
+
/**
* Allocate and initialize the device structure for the hfi.
* @dev: the pci_dev for hfi1_ib device
@@ -10721,18 +10748,13 @@ struct hfi1_devdata *hfi1_init_dd(struct pci_dev *pdev,
parse_platform_config(dd);
- /* add board names as they are defined */
- dd->boardname = kmalloc(64, GFP_KERNEL);
- if (!dd->boardname)
+ ret = obtain_boardname(dd);
+ if (ret)
goto bail_cleanup;
- snprintf(dd->boardname, 64, "Board ID 0x%llx",
- dd->revision >> CCE_REVISION_BOARD_ID_LOWER_NIBBLE_SHIFT
- & CCE_REVISION_BOARD_ID_LOWER_NIBBLE_MASK);
snprintf(dd->boardversion, BOARD_VERS_MAX,
- "ChipABI %u.%u, %s, ChipRev %u.%u, SW Compat %llu\n",
+ "ChipABI %u.%u, ChipRev %u.%u, SW Compat %llu\n",
HFI1_CHIP_VERS_MAJ, HFI1_CHIP_VERS_MIN,
- dd->boardname,
(u32)dd->majrev,
(u32)dd->minrev,
(dd->revision >> CCE_REVISION_SW_SHIFT)
diff --git a/drivers/staging/rdma/hfi1/efivar.c b/drivers/staging/rdma/hfi1/efivar.c
new file mode 100644
index 0000000..476391d
--- /dev/null
+++ b/drivers/staging/rdma/hfi1/efivar.c
@@ -0,0 +1,176 @@
+/*
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include "efivar.h"
+
+/* GUID for HFI1 variables in EFI */
+#define HFI1_EFIVAR_GUID EFI_GUID(0xc50a953e, 0xa8b2, 0x42a6, \
+ 0xbf, 0x89, 0xd3, 0x33, 0xa6, 0xe9, 0xe6, 0xd4)
+/* largest EFI data size we expect */
+#define EFI_DATA_SIZE 4096
+
+/*
+ * Read the named EFI variable. Return the size of the actual data in *size
+ * and a kmalloc'ed buffer in *return_data. The caller must free the
+ * data. It is guaranteed that *return_data will be NULL and *size = 0
+ * if this routine fails.
+ *
+ * Return 0 on success, -errno on failure.
+ */
+static int read_efi_var(const char *name, unsigned long *size,
+ void **return_data)
+{
+ int ret;
+
+ /* set failure return values */
+ *size = 0;
+ *return_data = NULL;
+
+ /*
+ * Use EFI run-time support to obtain an EFI variable. Support may
+ * be compiled out, so declare all variables inside.
+ */
+ if (efi_enabled(EFI_RUNTIME_SERVICES)) {
+ efi_status_t status;
+ efi_char16_t *uni_name;
+ efi_guid_t guid;
+ unsigned long temp_size;
+ void *temp_buffer;
+ void *data;
+ int i;
+
+ uni_name = kzalloc(sizeof(efi_char16_t) * (strlen(name) + 1),
+ GFP_KERNEL);
+ temp_buffer = kzalloc(EFI_DATA_SIZE, GFP_KERNEL);
+ data = NULL;
+
+ if (!uni_name || !temp_buffer) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ /* input: the size of the buffer */
+ temp_size = EFI_DATA_SIZE;
+
+ /* convert ASCII to unicode - it is a 1:1 mapping */
+ for (i = 0; name[i]; i++)
+ uni_name[i] = name[i];
+
+ /* need a variable for our GUID */
+ guid = HFI1_EFIVAR_GUID;
+
+ /* call into EFI runtime services */
+ status = efi.get_variable(
+ uni_name,
+ &guid,
+ NULL,
+ &temp_size,
+ temp_buffer);
+
+ /*
+ * It would be nice to call efi_status_to_err() here, but that
+ * is in the EFIVAR_FS code and may not be compiled in.
+ * However, even that is insufficient since it does not cover
+ * EFI_BUFFER_TOO_SMALL which could be an important return.
+ * For now, just split out succces or not found.
+ */
+ ret = status == EFI_SUCCESS ? 0 :
+ status == EFI_NOT_FOUND ? -ENOENT :
+ -EINVAL;
+
+ if (!ret) {
+ /*
+ * We have successfully read the EFI variable into our
+ * temporary buffer. Now allocate a correctly sized
+ * buffer.
+ */
+ data = kmalloc(temp_size, GFP_KERNEL);
+ if (data) {
+ memcpy(data, temp_buffer, temp_size);
+ *size = temp_size;
+ *return_data = data;
+ } else {
+ ret = -ENOMEM;
+ }
+ }
+
+fail:
+ kfree(uni_name);
+ kfree(temp_buffer);
+ } else {
+ ret = -ENOSYS;
+ }
+
+ return ret;
+}
+
+/*
+ * Read an HFI1 EFI variable of the form:
+ * <PCIe address>-<kind>
+ * Return an kalloc'ed array and size of the data.
+ *
+ * Returns 0 on success, -errno on failure.
+ */
+int read_hfi1_efi_var(struct hfi1_devdata *dd, const char *kind,
+ unsigned long *size, void **return_data)
+{
+ char name[64];
+
+ /* create a common prefix */
+ snprintf(name, sizeof(name), "%04x:%02x:%02x.%x-%s",
+ pci_domain_nr(dd->pcidev->bus),
+ dd->pcidev->bus->number,
+ PCI_SLOT(dd->pcidev->devfn),
+ PCI_FUNC(dd->pcidev->devfn),
+ kind);
+ name[sizeof(name) - 1] = 0; /* make sure the string is terminated */
+
+ return read_efi_var(name, size, return_data);
+}
diff --git a/drivers/staging/rdma/hfi1/efivar.h b/drivers/staging/rdma/hfi1/efivar.h
new file mode 100644
index 0000000..0707062
--- /dev/null
+++ b/drivers/staging/rdma/hfi1/efivar.h
@@ -0,0 +1,60 @@
+/*
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#ifndef _HFI1_EFIVAR_H
+#define _HFI1_EFIVAR_H
+
+#include <linux/efi.h>
+
+#include "hfi.h"
+
+int read_hfi1_efi_var(struct hfi1_devdata *dd, const char *kind,
+ unsigned long *size, void **return_data);
+
+#endif /* _HFI1_EFIVAR_H */
--
1.7.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
