The PCI-1710 series boards are multifunction data acquisition boards with
analog inputs and outputs, digital inputs and outputs, and counter/timer
functions.
The PCI-1720 is a simple 4 channel analog output board. It also uses a
unique register map.
Separate out the PCI-1720 support as a new driver, adv_pci1720, to ease
maintainability.
Fix some issues with the PCI-1720 support in the new driver:
1) the registers are all 8-bit
2) remove the analog output "reset" when the driver attaches/detaches
3) disable "synchronized output" to simplify the analog outputs
4) remove the need for the private data
5) add support for the BoardID register to allow multiple cards
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/Kconfig | 12 +-
drivers/staging/comedi/drivers/Makefile | 1 +
drivers/staging/comedi/drivers/adv_pci1710.c | 108 +--------------
drivers/staging/comedi/drivers/adv_pci1720.c | 195 +++++++++++++++++++++++++++
4 files changed, 211 insertions(+), 105 deletions(-)
create mode 100644 drivers/staging/comedi/drivers/adv_pci1720.c
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index ac0f010..945c85a 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -737,15 +737,23 @@ config COMEDI_ADL_PCI9118
called adl_pci9118.
config COMEDI_ADV_PCI1710
- tristate "Advantech PCI-171x, PCI-1720 and PCI-1731 support"
+ tristate "Advantech PCI-171x and PCI-1731 support"
select COMEDI_8254
---help---
Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
- PCI-1713, PCI-1720 and PCI-1731
+ PCI-1713 and PCI-1731
To compile this driver as a module, choose M here: the module will be
called adv_pci1710.
+config COMEDI_ADV_PCI1720
+ tristate "Advantech PCI-1720 support"
+ ---help---
+ Enable support for Advantech PCI-1720 Analog Output board.
+
+ To compile this driver as a module, choose M here: the module will be
+ called adv_pci1720.
+
config COMEDI_ADV_PCI1723
tristate "Advantech PCI-1723 support"
---help---
diff --git a/drivers/staging/comedi/drivers/Makefile b/drivers/staging/comedi/drivers/Makefile
index c3b8f2d..94c179b 100644
--- a/drivers/staging/comedi/drivers/Makefile
+++ b/drivers/staging/comedi/drivers/Makefile
@@ -78,6 +78,7 @@ obj-$(CONFIG_COMEDI_ADL_PCI8164) += adl_pci8164.o
obj-$(CONFIG_COMEDI_ADL_PCI9111) += adl_pci9111.o
obj-$(CONFIG_COMEDI_ADL_PCI9118) += adl_pci9118.o
obj-$(CONFIG_COMEDI_ADV_PCI1710) += adv_pci1710.o
+obj-$(CONFIG_COMEDI_ADV_PCI1720) += adv_pci1720.o
obj-$(CONFIG_COMEDI_ADV_PCI1723) += adv_pci1723.o
obj-$(CONFIG_COMEDI_ADV_PCI1724) += adv_pci1724.o
obj-$(CONFIG_COMEDI_ADV_PCI_DIO) += adv_pci_dio.o
diff --git a/drivers/staging/comedi/drivers/adv_pci1710.c b/drivers/staging/comedi/drivers/adv_pci1710.c
index 399c511..7cd4944 100644
--- a/drivers/staging/comedi/drivers/adv_pci1710.c
+++ b/drivers/staging/comedi/drivers/adv_pci1710.c
@@ -11,7 +11,7 @@
* Driver: adv_pci1710
* Description: Comedi driver for Advantech PCI-1710 series boards
* Devices: [Advantech] PCI-1710 (adv_pci1710), PCI-1710HG, PCI-1711,
- * PCI-1713, PCI-1720, PCI-1731
+ * PCI-1713, PCI-1731
* Author: Michal Dobes <dobes@xxxxxxxxx>
* Status: works
*
@@ -62,16 +62,6 @@
#define PCI171X_DO_REG 0x10 /* W: digital outputs */
#define PCI171X_TIMER_BASE 0x18 /* R/W: 8254 timer */
-/*
- * PCI-1720 only has analog outputs and has a different
- * register map (dev->iobase)
- */
-#define PCI1720_DA_REG(x) (0x00 + ((x) * 2)) /* W: D/A registers */
-#define PCI1720_RANGE_REG 0x08 /* R/W: D/A range register */
-#define PCI1720_SYNC_REG 0x09 /* W: D/A synchronized output */
-#define PCI1720_SYNC_CTRL_REG 0x0f /* R/W: D/A synchronized control */
-#define PCI1720_SYNC_CTRL_SC0 BIT(0) /* set synchronous output mode */
-
static const struct comedi_lrange range_pci1710_3 = {
9, {
BIP_RANGE(5),
@@ -122,15 +112,6 @@ static const struct comedi_lrange range_pci17x1 = {
static const char range_codes_pci17x1[] = { 0x00, 0x01, 0x02, 0x03, 0x04 };
-static const struct comedi_lrange pci1720_ao_range = {
- 4, {
- UNI_RANGE(5),
- UNI_RANGE(10),
- BIP_RANGE(5),
- BIP_RANGE(10)
- }
-};
-
static const struct comedi_lrange pci171x_ao_range = {
2, {
UNI_RANGE(5),
@@ -143,7 +124,6 @@ enum pci1710_boardid {
BOARD_PCI1710HG,
BOARD_PCI1711,
BOARD_PCI1713,
- BOARD_PCI1720,
BOARD_PCI1731,
};
@@ -153,7 +133,6 @@ struct boardtype {
const struct comedi_lrange *rangelist_ai; /* rangelist for A/D */
const char *rangecode_ai; /* range codes for programming */
unsigned int is_pci1713:1;
- unsigned int is_pci1720:1;
unsigned int has_irq:1;
unsigned int has_large_fifo:1; /* 4K or 1K FIFO */
unsigned int has_diff_ai:1;
@@ -207,11 +186,6 @@ static const struct boardtype boardtypes[] = {
.has_large_fifo = 1,
.has_diff_ai = 1,
},
- [BOARD_PCI1720] = {
- .name = "pci1720",
- .is_pci1720 = 1,
- .has_ao = 1,
- },
[BOARD_PCI1731] = {
.name = "pci1731",
.n_aichan = 16,
@@ -465,36 +439,6 @@ static int pci171x_do_insn_bits(struct comedi_device *dev,
return insn->n;
}
-static int pci1720_ao_insn_write(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data)
-{
- struct pci1710_private *devpriv = dev->private;
- unsigned int chan = CR_CHAN(insn->chanspec);
- unsigned int range = CR_RANGE(insn->chanspec);
- unsigned int val;
- int i;
-
- val = devpriv->da_ranges & (~(0x03 << (chan << 1)));
- val |= (range << (chan << 1));
- if (val != devpriv->da_ranges) {
- outb(val, dev->iobase + PCI1720_RANGE_REG);
- devpriv->da_ranges = val;
- }
-
- val = s->readback[chan];
- for (i = 0; i < insn->n; i++) {
- val = data[i];
- outw(val, dev->iobase + PCI1720_DA_REG(chan));
- outb(0, dev->iobase + PCI1720_SYNC_REG); /* update outputs */
- }
-
- s->readback[chan] = val;
-
- return insn->n;
-}
-
static int pci171x_ai_cancel(struct comedi_device *dev,
struct comedi_subdevice *s)
{
@@ -790,7 +734,7 @@ static int pci171x_insn_counter_config(struct comedi_device *dev,
return insn->n;
}
-static int pci171x_reset(struct comedi_device *dev)
+static int pci1710_reset(struct comedi_device *dev)
{
const struct boardtype *board = dev->board_ptr;
struct pci1710_private *devpriv = dev->private;
@@ -815,33 +759,6 @@ static int pci171x_reset(struct comedi_device *dev)
return 0;
}
-static int pci1720_reset(struct comedi_device *dev)
-{
- struct pci1710_private *devpriv = dev->private;
- /* set synchronous output mode */
- outb(PCI1720_SYNC_CTRL_SC0, dev->iobase + PCI1720_SYNC_CTRL_REG);
- devpriv->da_ranges = 0xAA;
- /* set all ranges to +/-5V and outputs to 0V */
- outb(devpriv->da_ranges, dev->iobase + PCI1720_RANGE_REG);
- outw(0x0800, dev->iobase + PCI1720_DA_REG(0));
- outw(0x0800, dev->iobase + PCI1720_DA_REG(1));
- outw(0x0800, dev->iobase + PCI1720_DA_REG(2));
- outw(0x0800, dev->iobase + PCI1720_DA_REG(3));
- outb(0, dev->iobase + PCI1720_SYNC_REG); /* update outputs */
-
- return 0;
-}
-
-static int pci1710_reset(struct comedi_device *dev)
-{
- const struct boardtype *board = dev->board_ptr;
-
- if (board->is_pci1720)
- return pci1720_reset(dev);
-
- return pci171x_reset(dev);
-}
-
static int pci1710_auto_attach(struct comedi_device *dev,
unsigned long context)
{
@@ -922,29 +839,15 @@ static int pci1710_auto_attach(struct comedi_device *dev,
s = &dev->subdevices[subdev];
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_WRITABLE | SDF_GROUND | SDF_COMMON;
+ s->n_chan = 2;
s->maxdata = 0x0fff;
- if (board->is_pci1720) {
- s->n_chan = 4;
- s->range_table = &pci1720_ao_range;
- s->insn_write = pci1720_ao_insn_write;
- } else {
- s->n_chan = 2;
- s->range_table = &pci171x_ao_range;
- s->insn_write = pci171x_ao_insn_write;
- }
+ s->range_table = &pci171x_ao_range;
+ s->insn_write = pci171x_ao_insn_write;
ret = comedi_alloc_subdev_readback(s);
if (ret)
return ret;
- /* initialize the readback values to match the board reset */
- if (board->is_pci1720) {
- int i;
-
- for (i = 0; i < s->n_chan; i++)
- s->readback[i] = 0x0800;
- }
-
subdev++;
}
@@ -1063,7 +966,6 @@ static const struct pci_device_id adv_pci1710_pci_table[] = {
},
{ PCI_VDEVICE(ADVANTECH, 0x1711), BOARD_PCI1711 },
{ PCI_VDEVICE(ADVANTECH, 0x1713), BOARD_PCI1713 },
- { PCI_VDEVICE(ADVANTECH, 0x1720), BOARD_PCI1720 },
{ PCI_VDEVICE(ADVANTECH, 0x1731), BOARD_PCI1731 },
{ 0 }
};
diff --git a/drivers/staging/comedi/drivers/adv_pci1720.c b/drivers/staging/comedi/drivers/adv_pci1720.c
new file mode 100644
index 0000000..77c078e
--- /dev/null
+++ b/drivers/staging/comedi/drivers/adv_pci1720.c
@@ -0,0 +1,195 @@
+/*
+ * COMEDI driver for Advantech PCI-1720U
+ * Copyright (c) 2015 H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
+ *
+ * Separated from the adv_pci1710 driver written by:
+ * Michal Dobes <dobes@xxxxxxxxx>
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 2000 David A. Schleef <ds@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Driver: adv_pci1720
+ * Description: 4-channel Isolated D/A Output board
+ * Devices: [Adventech] PCI-7220U
+ * Author: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
+ * Updated: Thu, 02 Aug 2012 14:27:46 -0700
+ * Status: untested
+ *
+ * Configuration options: not applicable, uses PCI auto config
+ *
+ * The PCI-1720 has 4 isolated 12-bit analog output channels with multiple
+ * output ranges. It also has a BoardID switch to allow differentiating
+ * multiple boards in the system.
+ *
+ * The analog outputs can operate in two modes, immediate and synchronized.
+ * This driver currently does not support the synchronized output mode.
+ *
+ * Jumpers JP1 to JP4 are used to set the current sink ranges for each
+ * analog output channel. In order to use the current sink ranges, the
+ * unipolar 5V range must be used. The voltage output and sink output for
+ * each channel is available on the connector as separate pins.
+ *
+ * Jumper JP5 controls the "hot" reset state of the analog outputs.
+ * Depending on its setting, the analog outputs will either keep the
+ * last settings and output values or reset to the default state after
+ * a "hot" reset. The default state for all channels is uniploar 5V range
+ * and all the output values are 0V. To allow this feature to work, the
+ * analog outputs are not "reset" when the driver attaches.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+
+#include "../comedi_pci.h"
+
+/*
+ * PCI BAR2 Register map (dev->iobase)
+ */
+#define PCI1720_AO_LSB_REG(x) (0x00 + ((x) * 2))
+#define PCI1720_AO_MSB_REG(x) (0x01 + ((x) * 2))
+#define PCI1720_AO_RANGE_REG 0x08
+#define PCI1720_AO_RANGE(c, r) (((r) & 0x3) << ((c) * 2))
+#define PCI1720_AO_RANGE_MASK(c) PCI1720_AO_RANGE((c), 0x3)
+#define PCI1720_SYNC_REG 0x09
+#define PCI1720_SYNC_CTRL_REG 0x0f
+#define PCI1720_SYNC_CTRL_SC0 BIT(0)
+#define PCI1720_BOARDID_REG 0x14
+
+static const struct comedi_lrange pci1720_ao_range = {
+ 4, {
+ UNI_RANGE(5),
+ UNI_RANGE(10),
+ BIP_RANGE(5),
+ BIP_RANGE(10)
+ }
+};
+
+static int pci1720_ao_insn_write(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ unsigned int chan = CR_CHAN(insn->chanspec);
+ unsigned int range = CR_RANGE(insn->chanspec);
+ unsigned int val;
+ int i;
+
+ /* set the channel range and polarity */
+ val = inb(dev->iobase + PCI1720_AO_RANGE_REG);
+ val &= ~PCI1720_AO_RANGE_MASK(chan);
+ val |= PCI1720_AO_RANGE(chan, range);
+ outb(val, dev->iobase + PCI1720_AO_RANGE_REG);
+
+ val = s->readback[chan];
+ for (i = 0; i < insn->n; i++) {
+ val = data[i];
+
+ outb(val & 0xff, dev->iobase + PCI1720_AO_LSB_REG(chan));
+ outb((val >> 8) & 0xff, dev->iobase + PCI1720_AO_MSB_REG(chan));
+
+ /* conversion time is 2us (500 kHz throughput) */
+ usleep_range(2, 100);
+ }
+
+ s->readback[chan] = val;
+
+ return insn->n;
+}
+
+static int pci1720_di_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ data[1] = inb(dev->iobase + PCI1720_BOARDID_REG);
+
+ return insn->n;
+}
+
+static int pci1720_auto_attach(struct comedi_device *dev,
+ unsigned long context)
+{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ struct comedi_subdevice *s;
+ int ret;
+
+ ret = comedi_pci_enable(dev);
+ if (ret)
+ return ret;
+ dev->iobase = pci_resource_start(pcidev, 2);
+
+ ret = comedi_alloc_subdevices(dev, 2);
+ if (ret)
+ return ret;
+
+ /* Analog Output subdevice */
+ s = &dev->subdevices[0];
+ s->type = COMEDI_SUBD_AO;
+ s->subdev_flags = SDF_WRITABLE;
+ s->n_chan = 4;
+ s->maxdata = 0x0fff;
+ s->range_table = &pci1720_ao_range;
+ s->insn_write = pci1720_ao_insn_write;
+
+ ret = comedi_alloc_subdev_readback(s);
+ if (ret)
+ return ret;
+
+ /* Digital Input subdevice (BoardID SW1) */
+ s = &dev->subdevices[1];
+ s->type = COMEDI_SUBD_DI;
+ s->subdev_flags = SDF_READABLE;
+ s->n_chan = 4;
+ s->maxdata = 1;
+ s->range_table = &range_digital;
+ s->insn_bits = pci1720_di_insn_bits;
+
+ /* disable synchronized output, channels update when written */
+ outb(0, dev->iobase + PCI1720_SYNC_CTRL_REG);
+
+ return 0;
+}
+
+static struct comedi_driver adv_pci1720_driver = {
+ .driver_name = "adv_pci1720",
+ .module = THIS_MODULE,
+ .auto_attach = pci1720_auto_attach,
+ .detach = comedi_pci_detach,
+};
+
+static int adv_pci1720_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ return comedi_pci_auto_config(dev, &adv_pci1720_driver,
+ id->driver_data);
+}
+
+static const struct pci_device_id adv_pci1720_pci_table[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1720) },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, adv_pci1720_pci_table);
+
+static struct pci_driver adv_pci1720_pci_driver = {
+ .name = "adv_pci1720",
+ .id_table = adv_pci1720_pci_table,
+ .probe = adv_pci1720_pci_probe,
+ .remove = comedi_pci_auto_unconfig,
+};
+module_comedi_pci_driver(adv_pci1720_driver, adv_pci1720_pci_driver);
+
+MODULE_AUTHOR("H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Comedi driver for Advantech PCI-1720 Analog Output board");
+MODULE_LICENSE("GPL");
--
2.5.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
