This is checkpatch fixes for hal/bb_cfg.c file:
line over 80 characters.
Signed-off-by: Ivan Safonov <insafonov@xxxxxxxxx>
---
Changes in v2: no changes.
drivers/staging/rtl8188eu/hal/bb_cfg.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/bb_cfg.c b/drivers/staging/rtl8188eu/hal/bb_cfg.c
index 82990ed..5ab8277 100644
--- a/drivers/staging/rtl8188eu/hal/bb_cfg.c
+++ b/drivers/staging/rtl8188eu/hal/bb_cfg.c
@@ -500,7 +500,8 @@ static u32 array_phy_reg_pg_8188e[] = {
};
-static void store_pwrindex_offset(struct adapter *Adapter, u32 regaddr, u32 bitmask, u32 data)
+static void store_pwrindex_offset(struct adapter *Adapter,
+ u32 regaddr, u32 bitmask, u32 data)
{
struct hal_data_8188e *hal_data = GET_HAL_DATA(Adapter);
u8 pwrGrpCnt = hal_data->pwrGroupCnt;
@@ -705,18 +706,21 @@ bool rtl88eu_phy_bb_config(struct adapter *adapt)
/* Enable BB and RF */
regval = usb_read16(adapt, REG_SYS_FUNC_EN);
- usb_write16(adapt, REG_SYS_FUNC_EN, (u16)(regval | BIT(13) | BIT(0) | BIT(1)));
+ usb_write16(adapt, REG_SYS_FUNC_EN,
+ (u16)(regval | BIT(13) | BIT(0) | BIT(1)));
usb_write8(adapt, REG_RF_CTRL, RF_EN | RF_RSTB | RF_SDMRSTB);
- usb_write8(adapt, REG_SYS_FUNC_EN, FEN_USBA | FEN_USBD | FEN_BB_GLB_RSTn | FEN_BBRSTB);
+ usb_write8(adapt, REG_SYS_FUNC_EN, FEN_USBA |
+ FEN_USBD | FEN_BB_GLB_RSTn | FEN_BBRSTB);
/* Config BB and AGC */
rtstatus = config_parafile(adapt);
/* write 0x24[16:11] = 0x24[22:17] = crystal_cap */
crystal_cap = hal_data->CrystalCap & 0x3F;
- phy_set_bb_reg(adapt, REG_AFE_XTAL_CTRL, 0x7ff800, (crystal_cap | (crystal_cap << 6)));
+ phy_set_bb_reg(adapt, REG_AFE_XTAL_CTRL, 0x7ff800,
+ (crystal_cap | (crystal_cap << 6)));
return rtstatus;
}
--
2.4.10
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
