[PATCH v3 15/23] staging/rdma/hfi1: Allow tuning of SDMA interrupt rate

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Mitko Haralanov <mitko.haralanov@xxxxxxxxx>

The SDMA engines were configured to generate progress interrupts every time they
processed N/2 descriptors (where N is the size of the descriptor queue). This
interval was too infrequent, leading to degraded performance.

This commit adds a module parameter, as well as a recommended default, which
allows for the tuning of the interrupt frequency.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@xxxxxxxxx>
Signed-off-by: Mitko Haralanov <mitko.haralanov@xxxxxxxxx>
Signed-off-by: Ira Weiny <ira.weiny@xxxxxxxxx>

---
Change from v2:
	Squash in a patch with a recommended default value of 64.

 drivers/staging/rdma/hfi1/sdma.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/rdma/hfi1/sdma.c b/drivers/staging/rdma/hfi1/sdma.c
index 53b3e4d9518b..77800df1d3b8 100644
--- a/drivers/staging/rdma/hfi1/sdma.c
+++ b/drivers/staging/rdma/hfi1/sdma.c
@@ -66,6 +66,7 @@
 
 /* must be a power of 2 >= 64 <= 32768 */
 #define SDMA_DESCQ_CNT 1024
+#define SDMA_DESC_INTR 64
 #define INVALID_TAIL 0xffff
 
 static uint sdma_descq_cnt = SDMA_DESCQ_CNT;
@@ -80,6 +81,10 @@ uint mod_num_sdma;
 module_param_named(num_sdma, mod_num_sdma, uint, S_IRUGO);
 MODULE_PARM_DESC(num_sdma, "Set max number SDMA engines to use");
 
+static uint sdma_desct_intr = SDMA_DESC_INTR;
+module_param_named(desct_intr, sdma_desct_intr, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(desct_intr, "Number of SDMA descriptor before interrupt");
+
 #define SDMA_WAIT_BATCH_SIZE 20
 /* max wait time for a SDMA engine to indicate it has halted */
 #define SDMA_ERR_HALT_TIMEOUT 10 /* ms */
@@ -1046,6 +1051,9 @@ int sdma_init(struct hfi1_devdata *dd, u8 port)
 		return -ENOMEM;
 
 	idle_cnt = ns_to_cclock(dd, idle_cnt);
+	if (!sdma_desct_intr)
+		sdma_desct_intr = SDMA_DESC_INTR;
+
 	/* Allocate memory for SendDMA descriptor FIFOs */
 	for (this_idx = 0; this_idx < num_engines; ++this_idx) {
 		sde = &dd->per_sdma[this_idx];
@@ -1548,7 +1556,7 @@ void sdma_engine_interrupt(struct sdma_engine *sde, u64 status)
 {
 	trace_hfi1_sdma_engine_interrupt(sde, status);
 	write_seqlock(&sde->head_lock);
-	sdma_set_desc_cnt(sde, sde->descq_cnt / 2);
+	sdma_set_desc_cnt(sde, sdma_desct_intr);
 	sdma_make_progress(sde, status);
 	write_sequnlock(&sde->head_lock);
 }
-- 
1.8.2

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux