The COMPLEMENT_BOOT code is used only for SDIO and is aware of
details of the SDIO implementation that don't belong into
the common linux_wlan.c file.
This moves the functions to linux_wlan_sdio.c to get them out of
the way.
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
drivers/staging/wilc1000/linux_wlan.c | 95 +++------------------------
drivers/staging/wilc1000/linux_wlan_sdio.c | 89 +++++++++++++++++++++++--
drivers/staging/wilc1000/linux_wlan_sdio.h | 4 --
drivers/staging/wilc1000/wilc_wfi_netdevice.h | 2 +-
drivers/staging/wilc1000/wilc_wlan.h | 4 +-
drivers/staging/wilc1000/wilc_wlan_if.h | 5 ++
6 files changed, 103 insertions(+), 96 deletions(-)
diff --git a/drivers/staging/wilc1000/linux_wlan.c b/drivers/staging/wilc1000/linux_wlan.c
index abcb70bb1bd7..980c2c8d300d 100644
--- a/drivers/staging/wilc1000/linux_wlan.c
+++ b/drivers/staging/wilc1000/linux_wlan.c
@@ -483,11 +483,7 @@ _fail_:
}
-#ifdef COMPLEMENT_BOOT
-static int repeat_power_cycle(perInterface_wlan_t *nic);
-#endif
-
-static int linux_wlan_start_firmware(perInterface_wlan_t *nic)
+int wilc1000_start_firmware(perInterface_wlan_t *nic)
{
int ret = 0;
@@ -502,19 +498,17 @@ static int linux_wlan_start_firmware(perInterface_wlan_t *nic)
/* wait for mac ready */
PRINT_D(INIT_DBG, "Waiting for Firmware to get ready ...\n");
ret = linux_wlan_lock_timeout(&wilc1000_dev->sync_event, 5000);
- if (ret) {
-#ifdef COMPLEMENT_BOOT
+ if (ret && wilc1000_dev->ops->repeat_power_cycle) {
static int timeout = 5;
if (timeout--) {
PRINT_D(INIT_DBG, "repeat power cycle[%d]", timeout);
- ret = repeat_power_cycle(nic);
+ ret = wilc1000_dev->ops->repeat_power_cycle(nic);
} else {
timeout = 5;
ret = -1;
goto _fail_;
}
-#endif
PRINT_D(INIT_DBG, "Firmware start timed out");
goto _fail_;
}
@@ -527,7 +521,8 @@ static int linux_wlan_start_firmware(perInterface_wlan_t *nic)
_fail_:
return ret;
}
-static int linux_wlan_firmware_download(struct wilc *p_nic)
+
+int wilc1000_firmware_download(struct wilc *p_nic)
{
int ret = 0;
@@ -954,77 +949,6 @@ static void wlan_deinitialize_threads(struct wilc *nic)
}
}
-#ifdef COMPLEMENT_BOOT
-
-#define READY_CHECK_THRESHOLD 30
-static u8 wilc1000_prepare_11b_core(struct wilc *nic)
-{
- u8 trials = 0;
-
- while ((wilc1000_core_11b_ready() && (READY_CHECK_THRESHOLD > (trials++)))) {
- PRINT_D(INIT_DBG, "11b core not ready yet: %u\n", trials);
- wilc_wlan_cleanup();
- wilc_wlan_global_reset();
- sdio_unregister_driver(&wilc_bus);
-
- sdio_register_driver(&wilc_bus);
-
- while (!wilc1000_probe)
- msleep(100);
- wilc1000_probe = 0;
- wilc1000_dev->dev = &wilc1000_sdio_func->dev;
- nic->ops = &wilc1000_sdio_ops;
- wilc_wlan_init(nic);
- }
-
- if (READY_CHECK_THRESHOLD <= trials)
- return 1;
- else
- return 0;
-
-}
-
-static int repeat_power_cycle(perInterface_wlan_t *nic)
-{
- int ret = 0;
- sdio_unregister_driver(&wilc_bus);
-
- sdio_register_driver(&wilc_bus);
-
- /* msleep(1000); */
- while (!wilc1000_probe)
- msleep(100);
- wilc1000_probe = 0;
- wilc1000_dev->dev = &wilc1000_sdio_func->dev;
- wilc1000_dev->ops = &wilc1000_sdio_ops;
- ret = wilc_wlan_init(wilc1000_dev);
-
- wilc1000_dev->mac_status = WILC_MAC_STATUS_INIT;
- #if (defined WILC_SDIO) && (!defined WILC_SDIO_IRQ_GPIO)
- wilc1000_sdio_enable_interrupt();
- #endif
-
- if (wilc1000_wlan_get_firmware(nic)) {
- PRINT_ER("Can't get firmware\n");
- ret = -1;
- goto __fail__;
- }
-
- /*Download firmware*/
- ret = linux_wlan_firmware_download(wilc1000_dev);
- if (ret < 0) {
- PRINT_ER("Failed to download firmware\n");
- goto __fail__;
- }
- /* Start firmware*/
- ret = linux_wlan_start_firmware(nic);
- if (ret < 0)
- PRINT_ER("Failed to start firmware\n");
-__fail__:
- return ret;
-}
-#endif
-
int wilc1000_wlan_init(struct net_device *dev, perInterface_wlan_t *p_nic)
{
perInterface_wlan_t *nic = p_nic;
@@ -1051,13 +975,12 @@ int wilc1000_wlan_init(struct net_device *dev, perInterface_wlan_t *p_nic)
goto _fail_wilc_wlan_;
}
-#if (defined WILC_SDIO) && (defined COMPLEMENT_BOOT)
- if (wilc1000_prepare_11b_core(wilc1000_dev)) {
+ if (wilc1000_dev->ops->prepare_11b_core &&
+ wilc1000_dev->ops->prepare_11b_core(wilc1000_dev)) {
PRINT_ER("11b Core is not ready\n");
ret = -EIO;
goto _fail_threads_;
}
-#endif
#if (!defined WILC_SDIO) || (defined WILC_SDIO_IRQ_GPIO)
if (init_irq(wilc1000_dev)) {
@@ -1082,7 +1005,7 @@ int wilc1000_wlan_init(struct net_device *dev, perInterface_wlan_t *p_nic)
}
/*Download firmware*/
- ret = linux_wlan_firmware_download(wilc1000_dev);
+ ret = wilc1000_firmware_download(wilc1000_dev);
if (ret < 0) {
PRINT_ER("Failed to download firmware\n");
ret = -EIO;
@@ -1090,7 +1013,7 @@ int wilc1000_wlan_init(struct net_device *dev, perInterface_wlan_t *p_nic)
}
/* Start firmware*/
- ret = linux_wlan_start_firmware(nic);
+ ret = wilc1000_start_firmware(nic);
if (ret < 0) {
PRINT_ER("Failed to start firmware\n");
ret = -EIO;
diff --git a/drivers/staging/wilc1000/linux_wlan_sdio.c b/drivers/staging/wilc1000/linux_wlan_sdio.c
index 429bdc85ed62..bb4a3acf16d0 100644
--- a/drivers/staging/wilc1000/linux_wlan_sdio.c
+++ b/drivers/staging/wilc1000/linux_wlan_sdio.c
@@ -1,5 +1,6 @@
#include "wilc_wfi_netdevice.h"
#include "linux_wlan_sdio.h"
+#include "wilc_wfi_netdevice.h"
#include <linux/mmc/sdio_func.h>
#include <linux/mmc/card.h>
@@ -23,7 +24,7 @@
#endif
-struct sdio_func *wilc1000_sdio_func;
+static struct sdio_func *wilc1000_sdio_func;
static unsigned int sdio_default_speed;
#define SDIO_VENDOR_ID_WILC 0x0296
@@ -108,7 +109,83 @@ static int wilc1000_sdio_cmd53(sdio_cmd53_t *cmd)
return 1;
}
-volatile int wilc1000_probe; /* COMPLEMENT_BOOT */
+static const struct wilc1000_ops wilc1000_sdio_ops;
+
+#ifdef COMPLEMENT_BOOT
+/* FIXME: remove all of COMPLEMENT_BOOT */
+
+static struct sdio_driver wilc_bus;
+static volatile int wilc1000_probe;
+
+#define READY_CHECK_THRESHOLD 30
+static u8 wilc1000_prepare_11b_core(struct wilc *nic)
+{
+ u8 trials = 0;
+
+ while ((wilc1000_core_11b_ready() && (READY_CHECK_THRESHOLD > (trials++)))) {
+ PRINT_D(INIT_DBG, "11b core not ready yet: %u\n", trials);
+ wilc_wlan_cleanup();
+ wilc_wlan_global_reset();
+ sdio_unregister_driver(&wilc_bus);
+
+ sdio_register_driver(&wilc_bus);
+
+ while (!wilc1000_probe)
+ msleep(100);
+ wilc1000_probe = 0;
+ wilc1000_dev->dev = &wilc1000_sdio_func->dev;
+ nic->ops = &wilc1000_sdio_ops;
+ wilc_wlan_init(nic);
+ }
+
+ if (READY_CHECK_THRESHOLD <= trials)
+ return 1;
+ else
+ return 0;
+
+}
+
+static int repeat_power_cycle(perInterface_wlan_t *nic)
+{
+ int ret = 0;
+ sdio_unregister_driver(&wilc_bus);
+
+ sdio_register_driver(&wilc_bus);
+
+ /* msleep(1000); */
+ while (!wilc1000_probe)
+ msleep(100);
+ wilc1000_probe = 0;
+ wilc1000_dev->dev = &wilc1000_sdio_func->dev;
+ wilc1000_dev->ops = &wilc1000_sdio_ops;
+ ret = wilc_wlan_init(wilc1000_dev);
+
+ wilc1000_dev->mac_status = WILC_MAC_STATUS_INIT;
+#if !defined WILC_SDIO_IRQ_GPIO
+ wilc1000_sdio_enable_interrupt();
+#endif
+
+ if (wilc1000_wlan_get_firmware(nic)) {
+ PRINT_ER("Can't get firmware\n");
+ ret = -1;
+ goto __fail__;
+ }
+
+ /*Download firmware*/
+ ret = wilc1000_firmware_download(wilc1000_dev);
+ if (ret < 0) {
+ PRINT_ER("Failed to download firmware\n");
+ goto __fail__;
+ }
+ /* Start firmware*/
+ ret = wilc1000_start_firmware(nic);
+ if (ret < 0)
+ PRINT_ER("Failed to start firmware\n");
+__fail__:
+ return ret;
+}
+#endif
+
static int linux_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id)
{
PRINT_D(INIT_DBG, "probe function\n");
@@ -141,7 +218,7 @@ static void linux_sdio_remove(struct sdio_func *func)
}
-struct sdio_driver wilc_bus = {
+static struct sdio_driver wilc_bus = {
.name = SDIO_MODALIAS,
.id_table = wilc_sdio_ids,
.probe = linux_sdio_probe,
@@ -238,10 +315,14 @@ static int wilc1000_sdio_set_default_speed(void)
return linux_sdio_set_speed(sdio_default_speed);
}
-const struct wilc1000_ops wilc1000_sdio_ops = {
+static const struct wilc1000_ops wilc1000_sdio_ops = {
.io_type = HIF_SDIO,
.io_init = wilc1000_sdio_init,
.io_deinit = wilc1000_sdio_deinit,
+#ifdef COMPLEMENT_BOOT
+ .repeat_power_cycle = repeat_power_cycle,
+ .prepare_11b_core = wilc1000_prepare_11b_core,
+#endif
.u.sdio.sdio_cmd52 = wilc1000_sdio_cmd52,
.u.sdio.sdio_cmd53 = wilc1000_sdio_cmd53,
.u.sdio.sdio_set_max_speed = wilc1000_sdio_set_max_speed,
diff --git a/drivers/staging/wilc1000/linux_wlan_sdio.h b/drivers/staging/wilc1000/linux_wlan_sdio.h
index de79aff9f11c..b4995a3211c7 100644
--- a/drivers/staging/wilc1000/linux_wlan_sdio.h
+++ b/drivers/staging/wilc1000/linux_wlan_sdio.h
@@ -1,9 +1,5 @@
#include <linux/mmc/sdio_func.h>
-extern struct sdio_func *wilc1000_sdio_func;
-extern struct sdio_driver wilc_bus;
-extern const struct wilc1000_ops wilc1000_sdio_ops;
-
int wilc1000_sdio_enable_interrupt(void);
void wilc1000_sdio_disable_interrupt(void);
diff --git a/drivers/staging/wilc1000/wilc_wfi_netdevice.h b/drivers/staging/wilc1000/wilc_wfi_netdevice.h
index 1e5e7dcee11d..ec5a8b1215b7 100644
--- a/drivers/staging/wilc1000/wilc_wfi_netdevice.h
+++ b/drivers/staging/wilc1000/wilc_wfi_netdevice.h
@@ -188,7 +188,7 @@ struct wilc {
struct device *dev;
};
-typedef struct {
+typedef struct wilc_per_interface {
u8 u8IfIdx;
u8 iftype;
int monitor_flag;
diff --git a/drivers/staging/wilc1000/wilc_wlan.h b/drivers/staging/wilc1000/wilc_wlan.h
index 2297e31b5b75..10b2a2f9e1b2 100644
--- a/drivers/staging/wilc1000/wilc_wlan.h
+++ b/drivers/staging/wilc1000/wilc_wlan.h
@@ -338,7 +338,9 @@ void WILC_WFI_p2p_rx(struct net_device *dev, u8 *buff, u32 size);
u8 wilc1000_core_11b_ready(void);
extern bool wilc1000_enable_ps;
-extern volatile int wilc1000_probe;
+
+int wilc1000_firmware_download(struct wilc *p_nic);
+int wilc1000_start_firmware(struct wilc_per_interface *nic);
void __init wilc1000_init_driver(void);
void __exit wilc1000_exit_driver(void);
diff --git a/drivers/staging/wilc1000/wilc_wlan_if.h b/drivers/staging/wilc1000/wilc_wlan_if.h
index bfa1291e22ed..a4befcb74c82 100644
--- a/drivers/staging/wilc1000/wilc_wlan_if.h
+++ b/drivers/staging/wilc1000/wilc_wlan_if.h
@@ -71,10 +71,15 @@ typedef struct {
u32 block_size;
} sdio_cmd53_t;
+struct wilc;
+struct wilc_per_interface;
struct wilc1000_ops {
int io_type;
int (*io_init)(void *);
void (*io_deinit)(void *);
+ int (*repeat_power_cycle)(struct wilc_per_interface *nic);
+ u8 (*prepare_11b_core)(struct wilc *nic);
+
union {
struct {
int (*sdio_cmd52)(sdio_cmd52_t *);
--
2.1.0.rc2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
