The comedi core expects (*insn_read) operations to return insn->n data values. Refactor this function to work like the core expects. For aesthetics, nvram_read() and use the comedi_timeout() helper to handle the busy wait for the eeprom to be "ready". Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> Cc: Ian Abbott <abbotti@xxxxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/staging/comedi/drivers/cb_pcidas.c | 80 ++++++++++++++---------------- 1 file changed, 38 insertions(+), 42 deletions(-) diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c index 4a90871..7f4e491 100644 --- a/drivers/staging/comedi/drivers/cb_pcidas.c +++ b/drivers/staging/comedi/drivers/cb_pcidas.c @@ -466,44 +466,18 @@ static int cb_pcidas_ao_fifo_winsn(struct comedi_device *dev, return insn->n; } -static int wait_for_nvram_ready(unsigned long s5933_base_addr) -{ - static const int timeout = 1000; - unsigned int i; - - for (i = 0; i < timeout; i++) { - if ((inb(s5933_base_addr + - AMCC_OP_REG_MCSR_NVCMD) & MCSR_NV_BUSY) - == 0) - return 0; - udelay(1); - } - return -1; -} - -static int nvram_read(struct comedi_device *dev, unsigned int address, - u8 *data) +static int cb_pcidas_eeprom_ready(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned long context) { struct cb_pcidas_private *devpriv = dev->private; - unsigned long iobase = devpriv->s5933_config; - - if (wait_for_nvram_ready(iobase) < 0) - return -ETIMEDOUT; - - outb(MCSR_NV_ENABLE | MCSR_NV_LOAD_LOW_ADDR, - iobase + AMCC_OP_REG_MCSR_NVCMD); - outb(address & 0xff, iobase + AMCC_OP_REG_MCSR_NVDATA); - outb(MCSR_NV_ENABLE | MCSR_NV_LOAD_HIGH_ADDR, - iobase + AMCC_OP_REG_MCSR_NVCMD); - outb((address >> 8) & 0xff, iobase + AMCC_OP_REG_MCSR_NVDATA); - outb(MCSR_NV_ENABLE | MCSR_NV_READ, iobase + AMCC_OP_REG_MCSR_NVCMD); - - if (wait_for_nvram_ready(iobase) < 0) - return -ETIMEDOUT; - - *data = inb(iobase + AMCC_OP_REG_MCSR_NVDATA); + unsigned int status; - return 0; + status = inb(devpriv->s5933_config + AMCC_OP_REG_MCSR_NVCMD); + if ((status & MCSR_NV_BUSY) == 0) + return 0; + return -EBUSY; } static int cb_pcidas_eeprom_insn_read(struct comedi_device *dev, @@ -511,16 +485,38 @@ static int cb_pcidas_eeprom_insn_read(struct comedi_device *dev, struct comedi_insn *insn, unsigned int *data) { - u8 nvram_data; - int retval; + struct cb_pcidas_private *devpriv = dev->private; + unsigned int chan = CR_CHAN(insn->chanspec); + int ret; + int i; - retval = nvram_read(dev, CR_CHAN(insn->chanspec), &nvram_data); - if (retval < 0) - return retval; + for (i = 0; i < insn->n; i++) { + /* make sure eeprom is ready */ + ret = comedi_timeout(dev, s, insn, cb_pcidas_eeprom_ready, 0); + if (ret) + return ret; + + /* set address (chan) and read operation */ + outb(MCSR_NV_ENABLE | MCSR_NV_LOAD_LOW_ADDR, + devpriv->s5933_config + AMCC_OP_REG_MCSR_NVCMD); + outb(chan & 0xff, + devpriv->s5933_config + AMCC_OP_REG_MCSR_NVDATA); + outb(MCSR_NV_ENABLE | MCSR_NV_LOAD_HIGH_ADDR, + devpriv->s5933_config + AMCC_OP_REG_MCSR_NVCMD); + outb((chan >> 8) & 0xff, + devpriv->s5933_config + AMCC_OP_REG_MCSR_NVDATA); + outb(MCSR_NV_ENABLE | MCSR_NV_READ, + devpriv->s5933_config + AMCC_OP_REG_MCSR_NVCMD); + + /* wait for data to be returned */ + ret = comedi_timeout(dev, s, insn, cb_pcidas_eeprom_ready, 0); + if (ret) + return ret; - data[0] = nvram_data; + data[i] = inb(devpriv->s5933_config + AMCC_OP_REG_MCSR_NVDATA); + } - return 1; + return insn->n; } static void cb_pcidas_calib_write(struct comedi_device *dev, -- 2.5.1 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel