For aesthetics, convert the inline functions that return the bits
used to set the DAC range and enable bits to macros.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/cb_pcidas.c | 26 ++++++++------------------
1 file changed, 8 insertions(+), 18 deletions(-)
diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c
index 5106b7d..e24def6 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas.c
@@ -130,15 +130,8 @@
#define DACEN 0x02 /* dac enable */
#define DAC_MODE_UPDATE_BOTH 0x80 /* update both dacs */
-static inline unsigned int DAC_RANGE(unsigned int channel, unsigned int range)
-{
- return (range & 0x3) << (8 + 2 * (channel & 0x1));
-}
-
-static inline unsigned int DAC_RANGE_MASK(unsigned int channel)
-{
- return 0x3 << (8 + 2 * (channel & 0x1));
-};
+#define DAC_RANGE(c, r) (((r) & 0x3) << (8 + 2 * ((c) & 0x1)))
+#define DAC_RANGE_MASK(c) DAC_RANGE((c), 0x3)
/* bits for 1602 series only */
#define DAC_EMPTY 0x1 /* fifo empty, read, write clear */
@@ -148,10 +141,7 @@ static inline unsigned int DAC_RANGE_MASK(unsigned int channel)
#define DAC_PACER_EXT_FALL 0x10 /* ext. pacing, falling edge */
#define DAC_PACER_EXT_RISE 0x18 /* ext. pacing, rising edge */
-static inline unsigned int DAC_CHAN_EN(unsigned int channel)
-{
- return 1 << (5 + (channel & 0x1)); /* enable channel 0 or 1 */
-};
+#define DAC_CHAN_EN(c) BIT(5 + ((c) & 0x1))
/*
* PCI BAR2 Register map (devpriv->pcibar2)
@@ -1108,13 +1098,13 @@ static int cb_pcidas_ao_cmd(struct comedi_device *dev,
/* set channel limits, gain */
spin_lock_irqsave(&dev->spinlock, flags);
for (i = 0; i < cmd->chanlist_len; i++) {
+ unsigned int chan = CR_CHAN(cmd->chanlist[i]);
+ unsigned int range = CR_RANGE(cmd->chanlist[i]);
+
/* enable channel */
- devpriv->ao_control_bits |=
- DAC_CHAN_EN(CR_CHAN(cmd->chanlist[i]));
+ devpriv->ao_control_bits |= DAC_CHAN_EN(chan);
/* set range */
- devpriv->ao_control_bits |= DAC_RANGE(CR_CHAN(cmd->chanlist[i]),
- CR_RANGE(cmd->
- chanlist[i]));
+ devpriv->ao_control_bits |= DAC_RANGE(chan, range);
}
/* disable analog out before settings pacer source and count values */
--
2.5.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
