Reformat the multi-line comments in the kernel CodingStyle. Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> Cc: Ian Abbott <abbotti@xxxxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/staging/comedi/drivers/cb_pcidas.c | 115 ++++++++++++++--------------- 1 file changed, 57 insertions(+), 58 deletions(-) diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c index b43e836..3e02777 100644 --- a/drivers/staging/comedi/drivers/cb_pcidas.c +++ b/drivers/staging/comedi/drivers/cb_pcidas.c @@ -1,65 +1,64 @@ /* - comedi/drivers/cb_pcidas.c + * cb_pcidas.c + * Developed by Ivan Martinez and Frank Mori Hess, with valuable help from + * David Schleef and the rest of the Comedi developers comunity. + * + * Copyright (C) 2001-2003 Ivan Martinez <imr@xxxxxxxxxxxxxx> + * Copyright (C) 2001,2002 Frank Mori Hess <fmhess@xxxxxxxxxxxxxxxxxxxxx> + * + * COMEDI - Linux Control and Measurement Device Interface + * Copyright (C) 1997-8 David A. Schleef <ds@xxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ - Developed by Ivan Martinez and Frank Mori Hess, with valuable help from - David Schleef and the rest of the Comedi developers comunity. - - Copyright (C) 2001-2003 Ivan Martinez <imr@xxxxxxxxxxxxxx> - Copyright (C) 2001,2002 Frank Mori Hess <fmhess@xxxxxxxxxxxxxxxxxxxxx> - - COMEDI - Linux Control and Measurement Device Interface - Copyright (C) 1997-8 David A. Schleef <ds@xxxxxxxxxxx> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. -*/ /* -Driver: cb_pcidas -Description: MeasurementComputing PCI-DAS series - with the AMCC S5933 PCI controller -Author: Ivan Martinez <imr@xxxxxxxxxxxxxx>, - Frank Mori Hess <fmhess@xxxxxxxxxxxxxxxxxxxxx> -Updated: 2003-3-11 -Devices: [Measurement Computing] PCI-DAS1602/16 (cb_pcidas), - PCI-DAS1602/16jr, PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, - PCI-DAS1000, PCI-DAS1001, PCI_DAS1002 - -Status: - There are many reports of the driver being used with most of the - supported cards. Despite no detailed log is maintained, it can - be said that the driver is quite tested and stable. - - The boards may be autocalibrated using the comedi_calibrate - utility. - -Configuration options: not applicable, uses PCI auto config - -For commands, the scanned channels must be consecutive -(i.e. 4-5-6-7, 2-3-4,...), and must all have the same -range and aref. - -AI Triggering: - For start_src == TRIG_EXT, the A/D EXTERNAL TRIGGER IN (pin 45) is used. - For 1602 series, the start_arg is interpreted as follows: - start_arg == 0 => gated trigger (level high) - start_arg == CR_INVERT => gated trigger (level low) - start_arg == CR_EDGE => Rising edge - start_arg == CR_EDGE | CR_INVERT => Falling edge - For the other boards the trigger will be done on rising edge -*/ -/* - -TODO: + * Driver: cb_pcidas + * Description: MeasurementComputing PCI-DAS series + * with the AMCC S5933 PCI controller + * Devices: [Measurement Computing] PCI-DAS1602/16 (cb_pcidas), + * PCI-DAS1602/16jr, PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, + * PCI-DAS1000, PCI-DAS1001, PCI_DAS1002 + * Author: Ivan Martinez <imr@xxxxxxxxxxxxxx>, + * Frank Mori Hess <fmhess@xxxxxxxxxxxxxxxxxxxxx> + * Updated: 2003-3-11 + * + * Status: + * There are many reports of the driver being used with most of the + * supported cards. Despite no detailed log is maintained, it can + * be said that the driver is quite tested and stable. + * + * The boards may be autocalibrated using the comedi_calibrate + * utility. + * + * Configuration options: not applicable, uses PCI auto config + * + * For commands, the scanned channels must be consecutive + * (i.e. 4-5-6-7, 2-3-4,...), and must all have the same + * range and aref. + * + * AI Triggering: + * For start_src == TRIG_EXT, the A/D EXTERNAL TRIGGER IN (pin 45) is used. + * For 1602 series, the start_arg is interpreted as follows: + * start_arg == 0 => gated trigger (level high) + * start_arg == CR_INVERT => gated trigger (level low) + * start_arg == CR_EDGE => Rising edge + * start_arg == CR_EDGE | CR_INVERT => Falling edge + * For the other boards the trigger will be done on rising edge + */ -analog triggering on 1602 series -*/ +/* + * TODO: + * analog triggering on 1602 series + */ #include <linux/module.h> #include <linux/delay.h> -- 2.5.1 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
