As suggested by checkpatch.pl, use the BIT macro to define the register bits. Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> Cc: Ian Abbott <abbotti@xxxxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/staging/comedi/drivers/ii_pci20kc.c | 70 ++++++++++++++--------------- 1 file changed, 35 insertions(+), 35 deletions(-) diff --git a/drivers/staging/comedi/drivers/ii_pci20kc.c b/drivers/staging/comedi/drivers/ii_pci20kc.c index 14ef1f6..4d3f89c 100644 --- a/drivers/staging/comedi/drivers/ii_pci20kc.c +++ b/drivers/staging/comedi/drivers/ii_pci20kc.c @@ -37,37 +37,37 @@ #define II20K_SIZE 0x400 #define II20K_MOD_OFFSET 0x100 #define II20K_ID_REG 0x00 -#define II20K_ID_MOD1_EMPTY (1 << 7) -#define II20K_ID_MOD2_EMPTY (1 << 6) -#define II20K_ID_MOD3_EMPTY (1 << 5) +#define II20K_ID_MOD1_EMPTY BIT(7) +#define II20K_ID_MOD2_EMPTY BIT(6) +#define II20K_ID_MOD3_EMPTY BIT(5) #define II20K_ID_MASK 0x1f #define II20K_ID_PCI20001C_1A 0x1b /* no on-board DIO */ #define II20K_ID_PCI20001C_2A 0x1d /* on-board DIO */ #define II20K_MOD_STATUS_REG 0x40 -#define II20K_MOD_STATUS_IRQ_MOD1 (1 << 7) -#define II20K_MOD_STATUS_IRQ_MOD2 (1 << 6) -#define II20K_MOD_STATUS_IRQ_MOD3 (1 << 5) +#define II20K_MOD_STATUS_IRQ_MOD1 BIT(7) +#define II20K_MOD_STATUS_IRQ_MOD2 BIT(6) +#define II20K_MOD_STATUS_IRQ_MOD3 BIT(5) #define II20K_DIO0_REG 0x80 #define II20K_DIO1_REG 0x81 #define II20K_DIR_ENA_REG 0x82 -#define II20K_DIR_DIO3_OUT (1 << 7) -#define II20K_DIR_DIO2_OUT (1 << 6) -#define II20K_BUF_DISAB_DIO3 (1 << 5) -#define II20K_BUF_DISAB_DIO2 (1 << 4) -#define II20K_DIR_DIO1_OUT (1 << 3) -#define II20K_DIR_DIO0_OUT (1 << 2) -#define II20K_BUF_DISAB_DIO1 (1 << 1) -#define II20K_BUF_DISAB_DIO0 (1 << 0) +#define II20K_DIR_DIO3_OUT BIT(7) +#define II20K_DIR_DIO2_OUT BIT(6) +#define II20K_BUF_DISAB_DIO3 BIT(5) +#define II20K_BUF_DISAB_DIO2 BIT(4) +#define II20K_DIR_DIO1_OUT BIT(3) +#define II20K_DIR_DIO0_OUT BIT(2) +#define II20K_BUF_DISAB_DIO1 BIT(1) +#define II20K_BUF_DISAB_DIO0 BIT(0) #define II20K_CTRL01_REG 0x83 -#define II20K_CTRL01_SET (1 << 7) -#define II20K_CTRL01_DIO0_IN (1 << 4) -#define II20K_CTRL01_DIO1_IN (1 << 1) +#define II20K_CTRL01_SET BIT(7) +#define II20K_CTRL01_DIO0_IN BIT(4) +#define II20K_CTRL01_DIO1_IN BIT(1) #define II20K_DIO2_REG 0xc0 #define II20K_DIO3_REG 0xc1 #define II20K_CTRL23_REG 0xc3 -#define II20K_CTRL23_SET (1 << 7) -#define II20K_CTRL23_DIO2_IN (1 << 4) -#define II20K_CTRL23_DIO3_IN (1 << 1) +#define II20K_CTRL23_SET BIT(7) +#define II20K_CTRL23_DIO2_IN BIT(4) +#define II20K_CTRL23_DIO3_IN BIT(1) #define II20K_ID_PCI20006M_1 0xe2 /* 1 AO channels */ #define II20K_ID_PCI20006M_2 0xe3 /* 2 AO channels */ @@ -78,27 +78,27 @@ #define II20K_ID_PCI20341M_1 0x77 /* 4 AI channels */ #define II20K_AI_STATUS_CMD_REG 0x01 -#define II20K_AI_STATUS_CMD_BUSY (1 << 7) -#define II20K_AI_STATUS_CMD_HW_ENA (1 << 1) -#define II20K_AI_STATUS_CMD_EXT_START (1 << 0) +#define II20K_AI_STATUS_CMD_BUSY BIT(7) +#define II20K_AI_STATUS_CMD_HW_ENA BIT(1) +#define II20K_AI_STATUS_CMD_EXT_START BIT(0) #define II20K_AI_LSB_REG 0x02 #define II20K_AI_MSB_REG 0x03 #define II20K_AI_PACER_RESET_REG 0x04 #define II20K_AI_16BIT_DATA_REG 0x06 #define II20K_AI_CONF_REG 0x10 -#define II20K_AI_CONF_ENA (1 << 2) +#define II20K_AI_CONF_ENA BIT(2) #define II20K_AI_OPT_REG 0x11 -#define II20K_AI_OPT_TRIG_ENA (1 << 5) -#define II20K_AI_OPT_TRIG_INV (1 << 4) +#define II20K_AI_OPT_TRIG_ENA BIT(5) +#define II20K_AI_OPT_TRIG_INV BIT(4) #define II20K_AI_OPT_TIMEBASE(x) (((x) & 0x3) << 1) -#define II20K_AI_OPT_BURST_MODE (1 << 0) +#define II20K_AI_OPT_BURST_MODE BIT(0) #define II20K_AI_STATUS_REG 0x12 -#define II20K_AI_STATUS_INT (1 << 7) -#define II20K_AI_STATUS_TRIG (1 << 6) -#define II20K_AI_STATUS_TRIG_ENA (1 << 5) -#define II20K_AI_STATUS_PACER_ERR (1 << 2) -#define II20K_AI_STATUS_DATA_ERR (1 << 1) -#define II20K_AI_STATUS_SET_TIME_ERR (1 << 0) +#define II20K_AI_STATUS_INT BIT(7) +#define II20K_AI_STATUS_TRIG BIT(6) +#define II20K_AI_STATUS_TRIG_ENA BIT(5) +#define II20K_AI_STATUS_PACER_ERR BIT(2) +#define II20K_AI_STATUS_DATA_ERR BIT(1) +#define II20K_AI_STATUS_SET_TIME_ERR BIT(0) #define II20K_AI_LAST_CHAN_ADDR_REG 0x13 #define II20K_AI_CUR_ADDR_REG 0x14 #define II20K_AI_SET_TIME_REG 0x15 @@ -109,9 +109,9 @@ #define II20K_AI_START_TRIG_REG 0x1a #define II20K_AI_COUNT_RESET_REG 0x1b #define II20K_AI_CHANLIST_REG 0x80 -#define II20K_AI_CHANLIST_ONBOARD_ONLY (1 << 5) +#define II20K_AI_CHANLIST_ONBOARD_ONLY BIT(5) #define II20K_AI_CHANLIST_GAIN(x) (((x) & 0x3) << 3) -#define II20K_AI_CHANLIST_MUX_ENA (1 << 2) +#define II20K_AI_CHANLIST_MUX_ENA BIT(2) #define II20K_AI_CHANLIST_CHAN(x) (((x) & 0x3) << 0) #define II20K_AI_CHANLIST_LEN 0x80 -- 2.5.1 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
