Reformat the multi-line comments in the kernel CodingStyle. Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> Cc: Ian Abbott <abbotti@xxxxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/staging/comedi/drivers/dt3000.c | 91 +++++++++++++++++---------------- 1 file changed, 46 insertions(+), 45 deletions(-) diff --git a/drivers/staging/comedi/drivers/dt3000.c b/drivers/staging/comedi/drivers/dt3000.c index 8c4f284..a229b73 100644 --- a/drivers/staging/comedi/drivers/dt3000.c +++ b/drivers/staging/comedi/drivers/dt3000.c @@ -1,52 +1,53 @@ /* - comedi/drivers/dt3000.c - Data Translation DT3000 series driver - - COMEDI - Linux Control and Measurement Device Interface - Copyright (C) 1999 David A. Schleef <ds@xxxxxxxxxxx> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. -*/ -/* -Driver: dt3000 -Description: Data Translation DT3000 series -Author: ds -Devices: [Data Translation] DT3001 (dt3000), DT3001-PGL, DT3002, DT3003, - DT3003-PGL, DT3004, DT3005, DT3004-200 -Updated: Mon, 14 Apr 2008 15:41:24 +0100 -Status: works - -Configuration Options: not applicable, uses PCI auto config + * dt3000.c + * Data Translation DT3000 series driver + * + * COMEDI - Linux Control and Measurement Device Interface + * Copyright (C) 1999 David A. Schleef <ds@xxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ -There is code to support AI commands, but it may not work. - -AO commands are not supported. -*/ +/* + * Driver: dt3000 + * Description: Data Translation DT3000 series + * Devices: [Data Translation] DT3001 (dt3000), DT3001-PGL, DT3002, DT3003, + * DT3003-PGL, DT3004, DT3005, DT3004-200 + * Author: ds + * Updated: Mon, 14 Apr 2008 15:41:24 +0100 + * Status: works + * + * Configuration Options: not applicable, uses PCI auto config + * + * There is code to support AI commands, but it may not work. + * + * AO commands are not supported. + */ /* - The DT3000 series is Data Translation's attempt to make a PCI - data acquisition board. The design of this series is very nice, - since each board has an on-board DSP (Texas Instruments TMS320C52). - However, a few details are a little annoying. The boards lack - bus-mastering DMA, which eliminates them from serious work. - They also are not capable of autocalibration, which is a common - feature in modern hardware. The default firmware is pretty bad, - making it nearly impossible to write an RT compatible driver. - It would make an interesting project to write a decent firmware - for these boards. - - Data Translation originally wanted an NDA for the documentation - for the 3k series. However, if you ask nicely, they might send - you the docs without one, also. -*/ + * The DT3000 series is Data Translation's attempt to make a PCI + * data acquisition board. The design of this series is very nice, + * since each board has an on-board DSP (Texas Instruments TMS320C52). + * However, a few details are a little annoying. The boards lack + * bus-mastering DMA, which eliminates them from serious work. + * They also are not capable of autocalibration, which is a common + * feature in modern hardware. The default firmware is pretty bad, + * making it nearly impossible to write an RT compatible driver. + * It would make an interesting project to write a decent firmware + * for these boards. + * + * Data Translation originally wanted an NDA for the documentation + * for the 3k series. However, if you ask nicely, they might send + * you the docs without one, also. + */ #include <linux/module.h> #include <linux/delay.h> -- 2.5.1 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
