The files that implement intefacing with sii164 DVI controller are not
used and therefore they can be removed.
Signed-off-by: Mike Rapoport <mike.rapoport@xxxxxxxxx>
---
drivers/staging/sm750fb/ddk750_dvi.c | 96 --------
drivers/staging/sm750fb/ddk750_dvi.h | 62 -----
drivers/staging/sm750fb/ddk750_sii164.c | 409 --------------------------------
drivers/staging/sm750fb/ddk750_sii164.h | 171 -------------
4 files changed, 738 deletions(-)
delete mode 100644 drivers/staging/sm750fb/ddk750_dvi.c
delete mode 100644 drivers/staging/sm750fb/ddk750_dvi.h
delete mode 100644 drivers/staging/sm750fb/ddk750_sii164.c
delete mode 100644 drivers/staging/sm750fb/ddk750_sii164.h
diff --git a/drivers/staging/sm750fb/ddk750_dvi.c b/drivers/staging/sm750fb/ddk750_dvi.c
deleted file mode 100644
index a7a2351..0000000
--- a/drivers/staging/sm750fb/ddk750_dvi.c
+++ /dev/null
@@ -1,96 +0,0 @@
-#define USE_DVICHIP
-#ifdef USE_DVICHIP
-#include "ddk750_help.h"
-#include "ddk750_reg.h"
-#include "ddk750_dvi.h"
-#include "ddk750_sii164.h"
-
-
-/* This global variable contains all the supported driver and its corresponding
- function API. Please set the function pointer to NULL whenever the function
- is not supported. */
-static dvi_ctrl_device_t g_dcftSupportedDviController[] = {
-#ifdef DVI_CTRL_SII164
- {
- .pfnInit = sii164InitChip,
- .pfnGetVendorId = sii164GetVendorID,
- .pfnGetDeviceId = sii164GetDeviceID,
-#ifdef SII164_FULL_FUNCTIONS
- .pfnResetChip = sii164ResetChip,
- .pfnGetChipString = sii164GetChipString,
- .pfnSetPower = sii164SetPower,
- .pfnEnableHotPlugDetection = sii164EnableHotPlugDetection,
- .pfnIsConnected = sii164IsConnected,
- .pfnCheckInterrupt = sii164CheckInterrupt,
- .pfnClearInterrupt = sii164ClearInterrupt,
-#endif
- },
-#endif
-};
-
-
-int dviInit(
- unsigned char edgeSelect,
- unsigned char busSelect,
- unsigned char dualEdgeClkSelect,
- unsigned char hsyncEnable,
- unsigned char vsyncEnable,
- unsigned char deskewEnable,
- unsigned char deskewSetting,
- unsigned char continuousSyncEnable,
- unsigned char pllFilterEnable,
- unsigned char pllFilterValue
- )
-{
- dvi_ctrl_device_t *pCurrentDviCtrl;
-
- pCurrentDviCtrl = g_dcftSupportedDviController;
- if (pCurrentDviCtrl->pfnInit != NULL) {
- return pCurrentDviCtrl->pfnInit(edgeSelect, busSelect, dualEdgeClkSelect, hsyncEnable,
- vsyncEnable, deskewEnable, deskewSetting, continuousSyncEnable,
- pllFilterEnable, pllFilterValue);
- }
- return -1; /* error */
-}
-
-
-/*
- * dviGetVendorID
- * This function gets the vendor ID of the DVI controller chip.
- *
- * Output:
- * Vendor ID
- */
-unsigned short dviGetVendorID(void)
-{
- dvi_ctrl_device_t *pCurrentDviCtrl;
-
- pCurrentDviCtrl = g_dcftSupportedDviController;
- if (pCurrentDviCtrl != (dvi_ctrl_device_t *)0)
- return pCurrentDviCtrl->pfnGetVendorId();
-
- return 0x0000;
-}
-
-
-/*
- * dviGetDeviceID
- * This function gets the device ID of the DVI controller chip.
- *
- * Output:
- * Device ID
- */
-unsigned short dviGetDeviceID(void)
-{
- dvi_ctrl_device_t *pCurrentDviCtrl;
-
- pCurrentDviCtrl = g_dcftSupportedDviController;
- if (pCurrentDviCtrl != (dvi_ctrl_device_t *)0)
- return pCurrentDviCtrl->pfnGetDeviceId();
-
- return 0x0000;
-}
-
-#endif
-
-
diff --git a/drivers/staging/sm750fb/ddk750_dvi.h b/drivers/staging/sm750fb/ddk750_dvi.h
deleted file mode 100644
index e1d4c9a..0000000
--- a/drivers/staging/sm750fb/ddk750_dvi.h
+++ /dev/null
@@ -1,62 +0,0 @@
-#ifndef DDK750_DVI_H__
-#define DDK750_DVI_H__
-
-/* dvi chip stuffs structros */
-
-typedef long (*PFN_DVICTRL_INIT)(
- unsigned char edgeSelect,
- unsigned char busSelect,
- unsigned char dualEdgeClkSelect,
- unsigned char hsyncEnable,
- unsigned char vsyncEnable,
- unsigned char deskewEnable,
- unsigned char deskewSetting,
- unsigned char continuousSyncEnable,
- unsigned char pllFilterEnable,
- unsigned char pllFilterValue);
-
-typedef void (*PFN_DVICTRL_RESETCHIP)(void);
-typedef char* (*PFN_DVICTRL_GETCHIPSTRING)(void);
-typedef unsigned short (*PFN_DVICTRL_GETVENDORID)(void);
-typedef unsigned short (*PFN_DVICTRL_GETDEVICEID)(void);
-typedef void (*PFN_DVICTRL_SETPOWER)(unsigned char powerUp);
-typedef void (*PFN_DVICTRL_HOTPLUGDETECTION)(unsigned char enableHotPlug);
-typedef unsigned char (*PFN_DVICTRL_ISCONNECTED)(void);
-typedef unsigned char (*PFN_DVICTRL_CHECKINTERRUPT)(void);
-typedef void (*PFN_DVICTRL_CLEARINTERRUPT)(void);
-
-/* Structure to hold all the function pointer to the DVI Controller. */
-typedef struct _dvi_ctrl_device_t {
- PFN_DVICTRL_INIT pfnInit;
- PFN_DVICTRL_RESETCHIP pfnResetChip;
- PFN_DVICTRL_GETCHIPSTRING pfnGetChipString;
- PFN_DVICTRL_GETVENDORID pfnGetVendorId;
- PFN_DVICTRL_GETDEVICEID pfnGetDeviceId;
- PFN_DVICTRL_SETPOWER pfnSetPower;
- PFN_DVICTRL_HOTPLUGDETECTION pfnEnableHotPlugDetection;
- PFN_DVICTRL_ISCONNECTED pfnIsConnected;
- PFN_DVICTRL_CHECKINTERRUPT pfnCheckInterrupt;
- PFN_DVICTRL_CLEARINTERRUPT pfnClearInterrupt;
-} dvi_ctrl_device_t;
-
-#define DVI_CTRL_SII164
-
-/* dvi functions prototype */
-int dviInit(
- unsigned char edgeSelect,
- unsigned char busSelect,
- unsigned char dualEdgeClkSelect,
- unsigned char hsyncEnable,
- unsigned char vsyncEnable,
- unsigned char deskewEnable,
- unsigned char deskewSetting,
- unsigned char continuousSyncEnable,
- unsigned char pllFilterEnable,
- unsigned char pllFilterValue
-);
-
-unsigned short dviGetVendorID(void);
-unsigned short dviGetDeviceID(void);
-
-#endif
-
diff --git a/drivers/staging/sm750fb/ddk750_sii164.c b/drivers/staging/sm750fb/ddk750_sii164.c
deleted file mode 100644
index 241b77b..0000000
--- a/drivers/staging/sm750fb/ddk750_sii164.c
+++ /dev/null
@@ -1,409 +0,0 @@
-#define USE_DVICHIP
-#ifdef USE_DVICHIP
-
-#include "ddk750_sii164.h"
-#include "ddk750_hwi2c.h"
-
-/* I2C Address of each SII164 chip */
-#define SII164_I2C_ADDRESS 0x70
-
-/* Define this definition to use hardware i2c. */
-#define USE_HW_I2C
-
-#ifdef USE_HW_I2C
- #define i2cWriteReg sm750_hw_i2c_write_reg
- #define i2cReadReg sm750_hw_i2c_read_reg
-#else
- #define i2cWriteReg swI2CWriteReg
- #define i2cReadReg swI2CReadReg
-#endif
-
-/* SII164 Vendor and Device ID */
-#define SII164_VENDOR_ID 0x0001
-#define SII164_DEVICE_ID 0x0006
-
-#ifdef SII164_FULL_FUNCTIONS
-/* Name of the DVI Controller chip */
-static char *gDviCtrlChipName = "Silicon Image SiI 164";
-#endif
-
-/*
- * sii164GetVendorID
- * This function gets the vendor ID of the DVI controller chip.
- *
- * Output:
- * Vendor ID
- */
-unsigned short sii164GetVendorID(void)
-{
- unsigned short vendorID;
-
- vendorID = ((unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_VENDOR_ID_HIGH) << 8) |
- (unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_VENDOR_ID_LOW);
-
- return vendorID;
-}
-
-/*
- * sii164GetDeviceID
- * This function gets the device ID of the DVI controller chip.
- *
- * Output:
- * Device ID
- */
-unsigned short sii164GetDeviceID(void)
-{
- unsigned short deviceID;
-
- deviceID = ((unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_DEVICE_ID_HIGH) << 8) |
- (unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_DEVICE_ID_LOW);
-
- return deviceID;
-}
-
-
-
-/* DVI.C will handle all SiI164 chip stuffs and try it best to make code minimal and useful */
-
-/*
- * sii164InitChip
- * This function initialize and detect the DVI controller chip.
- *
- * Input:
- * edgeSelect - Edge Select:
- * 0 = Input data is falling edge latched (falling edge
- * latched first in dual edge mode)
- * 1 = Input data is rising edge latched (rising edge
- * latched first in dual edge mode)
- * busSelect - Input Bus Select:
- * 0 = Input data bus is 12-bits wide
- * 1 = Input data bus is 24-bits wide
- * dualEdgeClkSelect - Dual Edge Clock Select
- * 0 = Input data is single edge latched
- * 1 = Input data is dual edge latched
- * hsyncEnable - Horizontal Sync Enable:
- * 0 = HSYNC input is transmitted as fixed LOW
- * 1 = HSYNC input is transmitted as is
- * vsyncEnable - Vertical Sync Enable:
- * 0 = VSYNC input is transmitted as fixed LOW
- * 1 = VSYNC input is transmitted as is
- * deskewEnable - De-skewing Enable:
- * 0 = De-skew disabled
- * 1 = De-skew enabled
- * deskewSetting - De-skewing Setting (increment of 260psec)
- * 0 = 1 step --> minimum setup / maximum hold
- * 1 = 2 step
- * 2 = 3 step
- * 3 = 4 step
- * 4 = 5 step
- * 5 = 6 step
- * 6 = 7 step
- * 7 = 8 step --> maximum setup / minimum hold
- * continuousSyncEnable- SYNC Continuous:
- * 0 = Disable
- * 1 = Enable
- * pllFilterEnable - PLL Filter Enable
- * 0 = Disable PLL Filter
- * 1 = Enable PLL Filter
- * pllFilterValue - PLL Filter characteristics:
- * 0~7 (recommended value is 4)
- *
- * Output:
- * 0 - Success
- * -1 - Fail.
- */
-long sii164InitChip(
- unsigned char edgeSelect,
- unsigned char busSelect,
- unsigned char dualEdgeClkSelect,
- unsigned char hsyncEnable,
- unsigned char vsyncEnable,
- unsigned char deskewEnable,
- unsigned char deskewSetting,
- unsigned char continuousSyncEnable,
- unsigned char pllFilterEnable,
- unsigned char pllFilterValue
-)
-{
- unsigned char config;
-
- /* Initialize the i2c bus */
-#ifdef USE_HW_I2C
- /* Use fast mode. */
- sm750_hw_i2c_init(1);
-#else
- sm750_sw_i2c_init(DEFAULT_I2C_SCL, DEFAULT_I2C_SDA);
-#endif
-
- /* Check if SII164 Chip exists */
- if ((sii164GetVendorID() == SII164_VENDOR_ID) && (sii164GetDeviceID() == SII164_DEVICE_ID)) {
- /*
- * Initialize SII164 controller chip.
- */
-
- /* Select the edge */
- if (edgeSelect == 0)
- config = SII164_CONFIGURATION_LATCH_FALLING;
- else
- config = SII164_CONFIGURATION_LATCH_RISING;
-
- /* Select bus wide */
- if (busSelect == 0)
- config |= SII164_CONFIGURATION_BUS_12BITS;
- else
- config |= SII164_CONFIGURATION_BUS_24BITS;
-
- /* Select Dual/Single Edge Clock */
- if (dualEdgeClkSelect == 0)
- config |= SII164_CONFIGURATION_CLOCK_SINGLE;
- else
- config |= SII164_CONFIGURATION_CLOCK_DUAL;
-
- /* Select HSync Enable */
- if (hsyncEnable == 0)
- config |= SII164_CONFIGURATION_HSYNC_FORCE_LOW;
- else
- config |= SII164_CONFIGURATION_HSYNC_AS_IS;
-
- /* Select VSync Enable */
- if (vsyncEnable == 0)
- config |= SII164_CONFIGURATION_VSYNC_FORCE_LOW;
- else
- config |= SII164_CONFIGURATION_VSYNC_AS_IS;
-
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
-
- /* De-skew enabled with default 111b value.
- This will fix some artifacts problem in some mode on board 2.2.
- Somehow this fix does not affect board 2.1.
- */
- if (deskewEnable == 0)
- config = SII164_DESKEW_DISABLE;
- else
- config = SII164_DESKEW_ENABLE;
-
- switch (deskewSetting) {
- case 0:
- config |= SII164_DESKEW_1_STEP;
- break;
- case 1:
- config |= SII164_DESKEW_2_STEP;
- break;
- case 2:
- config |= SII164_DESKEW_3_STEP;
- break;
- case 3:
- config |= SII164_DESKEW_4_STEP;
- break;
- case 4:
- config |= SII164_DESKEW_5_STEP;
- break;
- case 5:
- config |= SII164_DESKEW_6_STEP;
- break;
- case 6:
- config |= SII164_DESKEW_7_STEP;
- break;
- case 7:
- config |= SII164_DESKEW_8_STEP;
- break;
- }
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_DESKEW, config);
-
- /* Enable/Disable Continuous Sync. */
- if (continuousSyncEnable == 0)
- config = SII164_PLL_FILTER_SYNC_CONTINUOUS_DISABLE;
- else
- config = SII164_PLL_FILTER_SYNC_CONTINUOUS_ENABLE;
-
- /* Enable/Disable PLL Filter */
- if (pllFilterEnable == 0)
- config |= SII164_PLL_FILTER_DISABLE;
- else
- config |= SII164_PLL_FILTER_ENABLE;
-
- /* Set the PLL Filter value */
- config |= ((pllFilterValue & 0x07) << 1);
-
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_PLL, config);
-
- /* Recover from Power Down and enable output. */
- config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
- config |= SII164_CONFIGURATION_POWER_NORMAL;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
-
- return 0;
- }
-
- /* Return -1 if initialization fails. */
- return (-1);
-}
-
-
-
-
-
-/* below sii164 function is not necessary */
-
-#ifdef SII164_FULL_FUNCTIONS
-
-/*
- * sii164ResetChip
- * This function resets the DVI Controller Chip.
- */
-void sii164ResetChip(void)
-{
- /* Power down */
- sii164SetPower(0);
- sii164SetPower(1);
-}
-
-
-/*
- * sii164GetChipString
- * This function returns a char string name of the current DVI Controller chip.
- * It's convenient for application need to display the chip name.
- */
-char *sii164GetChipString(void)
-{
- return gDviCtrlChipName;
-}
-
-
-/*
- * sii164SetPower
- * This function sets the power configuration of the DVI Controller Chip.
- *
- * Input:
- * powerUp - Flag to set the power down or up
- */
-void sii164SetPower(
- unsigned char powerUp
-)
-{
- unsigned char config;
-
- config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
- if (powerUp == 1) {
- /* Power up the chip */
- config &= ~SII164_CONFIGURATION_POWER_MASK;
- config |= SII164_CONFIGURATION_POWER_NORMAL;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
- } else {
- /* Power down the chip */
- config &= ~SII164_CONFIGURATION_POWER_MASK;
- config |= SII164_CONFIGURATION_POWER_DOWN;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
- }
-}
-
-
-/*
- * sii164SelectHotPlugDetectionMode
- * This function selects the mode of the hot plug detection.
- */
-static void sii164SelectHotPlugDetectionMode(
- sii164_hot_plug_mode_t hotPlugMode
-)
-{
- unsigned char detectReg;
-
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & ~SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG;
- switch (hotPlugMode) {
- case SII164_HOTPLUG_DISABLE:
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HIGH;
- break;
- case SII164_HOTPLUG_USE_MDI:
- detectReg &= ~SII164_DETECT_INTERRUPT_MASK;
- detectReg |= SII164_DETECT_INTERRUPT_BY_HTPLG_PIN;
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_MDI;
- break;
- case SII164_HOTPLUG_USE_RSEN:
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_RSEN;
- break;
- case SII164_HOTPLUG_USE_HTPLG:
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HTPLG;
- break;
- }
-
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_DETECT, detectReg);
-}
-
-/*
- * sii164EnableHotPlugDetection
- * This function enables the Hot Plug detection.
- *
- * enableHotPlug - Enable (=1) / disable (=0) Hot Plug detection
- */
-void sii164EnableHotPlugDetection(
- unsigned char enableHotPlug
-)
-{
- unsigned char detectReg;
-
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT);
-
- /* Depending on each DVI controller, need to enable the hot plug based on each
- individual chip design. */
- if (enableHotPlug != 0)
- sii164SelectHotPlugDetectionMode(SII164_HOTPLUG_USE_MDI);
- else
- sii164SelectHotPlugDetectionMode(SII164_HOTPLUG_DISABLE);
-}
-
-/*
- * sii164IsConnected
- * Check if the DVI Monitor is connected.
- *
- * Output:
- * 0 - Not Connected
- * 1 - Connected
- */
-unsigned char sii164IsConnected(void)
-{
- unsigned char hotPlugValue;
-
- hotPlugValue = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & SII164_DETECT_HOT_PLUG_STATUS_MASK;
- if (hotPlugValue == SII164_DETECT_HOT_PLUG_STATUS_ON)
- return 1;
- else
- return 0;
-}
-
-/*
- * sii164CheckInterrupt
- * Checks if interrupt has occurred.
- *
- * Output:
- * 0 - No interrupt
- * 1 - Interrupt occurs
- */
-unsigned char sii164CheckInterrupt(void)
-{
- unsigned char detectReg;
-
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & SII164_DETECT_MONITOR_STATE_MASK;
- if (detectReg == SII164_DETECT_MONITOR_STATE_CHANGE)
- return 1;
- else
- return 0;
-}
-
-/*
- * sii164ClearInterrupt
- * Clear the hot plug interrupt.
- */
-void sii164ClearInterrupt(void)
-{
- unsigned char detectReg;
-
- /* Clear the MDI interrupt */
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT);
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_DETECT, detectReg | SII164_DETECT_MONITOR_STATE_CLEAR);
-}
-
-#endif
-
-#endif
-
-
diff --git a/drivers/staging/sm750fb/ddk750_sii164.h b/drivers/staging/sm750fb/ddk750_sii164.h
deleted file mode 100644
index f2610c9..0000000
--- a/drivers/staging/sm750fb/ddk750_sii164.h
+++ /dev/null
@@ -1,171 +0,0 @@
-#ifndef DDK750_SII164_H__
-#define DDK750_SII164_H__
-
-#define USE_DVICHIP
-
-/* Hot Plug detection mode structure */
-typedef enum _sii164_hot_plug_mode_t {
- SII164_HOTPLUG_DISABLE = 0, /* Disable Hot Plug output bit (always high). */
- SII164_HOTPLUG_USE_MDI, /* Use Monitor Detect Interrupt bit. */
- SII164_HOTPLUG_USE_RSEN, /* Use Receiver Sense detect bit. */
- SII164_HOTPLUG_USE_HTPLG /* Use Hot Plug detect bit. */
-} sii164_hot_plug_mode_t;
-
-
-/* Silicon Image SiI164 chip prototype */
-long sii164InitChip(
- unsigned char edgeSelect,
- unsigned char busSelect,
- unsigned char dualEdgeClkSelect,
- unsigned char hsyncEnable,
- unsigned char vsyncEnable,
- unsigned char deskewEnable,
- unsigned char deskewSetting,
- unsigned char continuousSyncEnable,
- unsigned char pllFilterEnable,
- unsigned char pllFilterValue
-);
-
-unsigned short sii164GetVendorID(void);
-unsigned short sii164GetDeviceID(void);
-
-
-#ifdef SII164_FULL_FUNCTIONS
-void sii164ResetChip(void);
-char *sii164GetChipString(void);
-void sii164SetPower(unsigned char powerUp);
-void sii164EnableHotPlugDetection(unsigned char enableHotPlug);
-unsigned char sii164IsConnected(void);
-unsigned char sii164CheckInterrupt(void);
-void sii164ClearInterrupt(void);
-#endif
-/* below register definination is used for Silicon Image SiI164 DVI controller chip */
-/*
- * Vendor ID registers
- */
-#define SII164_VENDOR_ID_LOW 0x00
-#define SII164_VENDOR_ID_HIGH 0x01
-
-/*
- * Device ID registers
- */
-#define SII164_DEVICE_ID_LOW 0x02
-#define SII164_DEVICE_ID_HIGH 0x03
-
-/*
- * Device Revision
- */
-#define SII164_DEVICE_REVISION 0x04
-
-/*
- * Frequency Limitation registers
- */
-#define SII164_FREQUENCY_LIMIT_LOW 0x06
-#define SII164_FREQUENCY_LIMIT_HIGH 0x07
-
-/*
- * Power Down and Input Signal Configuration registers
- */
-#define SII164_CONFIGURATION 0x08
-
-/* Power down (PD) */
-#define SII164_CONFIGURATION_POWER_DOWN 0x00
-#define SII164_CONFIGURATION_POWER_NORMAL 0x01
-#define SII164_CONFIGURATION_POWER_MASK 0x01
-
-/* Input Edge Latch Select (EDGE) */
-#define SII164_CONFIGURATION_LATCH_FALLING 0x00
-#define SII164_CONFIGURATION_LATCH_RISING 0x02
-
-/* Bus Select (BSEL) */
-#define SII164_CONFIGURATION_BUS_12BITS 0x00
-#define SII164_CONFIGURATION_BUS_24BITS 0x04
-
-/* Dual Edge Clock Select (DSEL) */
-#define SII164_CONFIGURATION_CLOCK_SINGLE 0x00
-#define SII164_CONFIGURATION_CLOCK_DUAL 0x08
-
-/* Horizontal Sync Enable (HEN) */
-#define SII164_CONFIGURATION_HSYNC_FORCE_LOW 0x00
-#define SII164_CONFIGURATION_HSYNC_AS_IS 0x10
-
-/* Vertical Sync Enable (VEN) */
-#define SII164_CONFIGURATION_VSYNC_FORCE_LOW 0x00
-#define SII164_CONFIGURATION_VSYNC_AS_IS 0x20
-
-/*
- * Detection registers
- */
-#define SII164_DETECT 0x09
-
-/* Monitor Detect Interrupt (MDI) */
-#define SII164_DETECT_MONITOR_STATE_CHANGE 0x00
-#define SII164_DETECT_MONITOR_STATE_NO_CHANGE 0x01
-#define SII164_DETECT_MONITOR_STATE_CLEAR 0x01
-#define SII164_DETECT_MONITOR_STATE_MASK 0x01
-
-/* Hot Plug detect Input (HTPLG) */
-#define SII164_DETECT_HOT_PLUG_STATUS_OFF 0x00
-#define SII164_DETECT_HOT_PLUG_STATUS_ON 0x02
-#define SII164_DETECT_HOT_PLUG_STATUS_MASK 0x02
-
-/* Receiver Sense (RSEN) */
-#define SII164_DETECT_RECEIVER_SENSE_NOT_DETECTED 0x00
-#define SII164_DETECT_RECEIVER_SENSE_DETECTED 0x04
-
-/* Interrupt Generation Method (TSEL) */
-#define SII164_DETECT_INTERRUPT_BY_RSEN_PIN 0x00
-#define SII164_DETECT_INTERRUPT_BY_HTPLG_PIN 0x08
-#define SII164_DETECT_INTERRUPT_MASK 0x08
-
-/* Monitor Sense Output (MSEN) */
-#define SII164_DETECT_MONITOR_SENSE_OUTPUT_HIGH 0x00
-#define SII164_DETECT_MONITOR_SENSE_OUTPUT_MDI 0x10
-#define SII164_DETECT_MONITOR_SENSE_OUTPUT_RSEN 0x20
-#define SII164_DETECT_MONITOR_SENSE_OUTPUT_HTPLG 0x30
-#define SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG 0x30
-
-/*
- * Skewing registers
- */
-#define SII164_DESKEW 0x0A
-
-/* General Purpose Input (CTL[3:1]) */
-#define SII164_DESKEW_GENERAL_PURPOSE_INPUT_MASK 0x0E
-
-/* De-skewing Enable bit (DKEN) */
-#define SII164_DESKEW_DISABLE 0x00
-#define SII164_DESKEW_ENABLE 0x10
-
-/* De-skewing Setting (DK[3:1])*/
-#define SII164_DESKEW_1_STEP 0x00
-#define SII164_DESKEW_2_STEP 0x20
-#define SII164_DESKEW_3_STEP 0x40
-#define SII164_DESKEW_4_STEP 0x60
-#define SII164_DESKEW_5_STEP 0x80
-#define SII164_DESKEW_6_STEP 0xA0
-#define SII164_DESKEW_7_STEP 0xC0
-#define SII164_DESKEW_8_STEP 0xE0
-
-/*
- * User Configuration Data registers (CFG 7:0)
- */
-#define SII164_USER_CONFIGURATION 0x0B
-
-/*
- * PLL registers
- */
-#define SII164_PLL 0x0C
-
-/* PLL Filter Value (PLLF) */
-#define SII164_PLL_FILTER_VALUE_MASK 0x0E
-
-/* PLL Filter Enable (PFEN) */
-#define SII164_PLL_FILTER_DISABLE 0x00
-#define SII164_PLL_FILTER_ENABLE 0x01
-
-/* Sync Continuous (SCNT) */
-#define SII164_PLL_FILTER_SYNC_CONTINUOUS_DISABLE 0x00
-#define SII164_PLL_FILTER_SYNC_CONTINUOUS_ENABLE 0x80
-
-#endif
--
2.1.0
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
