For aesthetics, define a macro for the pacer clock options and rename
the CamelCase.
Remove the unnecessary local variables used to set the control register.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/quatech_daqp_cs.c | 28 ++++++++++--------------
1 file changed, 11 insertions(+), 17 deletions(-)
diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
index a2bbba1..0d814ff 100644
--- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c
+++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
@@ -85,10 +85,11 @@ struct daqp_private {
#define DAQP_SCANLIST_EXT_GAIN(x) ((x) << 4)
#define DAQP_SCANLIST_EXT_CHANNEL(x) (x)
-#define DAQP_CONTROL_PACER_100kHz 0xc0
-#define DAQP_CONTROL_PACER_1MHz 0x80
-#define DAQP_CONTROL_PACER_5MHz 0x40
-#define DAQP_CONTROL_PACER_EXTERNAL 0x00
+#define DAQP_CONTROL_PACER_CLK(x) (((x) & 0x3) << 6)
+#define DAQP_CONTROL_PACER_CLK_EXT DAQP_CONTROL_PACER_CLK(0)
+#define DAQP_CONTROL_PACER_CLK_5MHZ DAQP_CONTROL_PACER_CLK(1)
+#define DAQP_CONTROL_PACER_CLK_1MHZ DAQP_CONTROL_PACER_CLK(2)
+#define DAQP_CONTROL_PACER_CLK_100KHZ DAQP_CONTROL_PACER_CLK(3)
#define DAQP_CONTORL_EXPANSION 0x20
#define DAQP_CONTROL_EOS_INT_ENABLE 0x10
#define DAQP_CONTROL_FIFO_INT_ENABLE 0x08
@@ -280,7 +281,6 @@ static int daqp_ai_insn_read(struct comedi_device *dev,
{
struct daqp_private *devpriv = dev->private;
int i;
- int v;
int counter = 10000;
if (devpriv->stop)
@@ -302,11 +302,9 @@ static int daqp_ai_insn_read(struct comedi_device *dev,
outb(DAQP_COMMAND_RSTF, dev->iobase + DAQP_COMMAND);
/* Set trigger */
-
- v = DAQP_CONTROL_TRIGGER_ONESHOT | DAQP_CONTROL_TRIGGER_INTERNAL
- | DAQP_CONTROL_PACER_100kHz | DAQP_CONTROL_EOS_INT_ENABLE;
-
- outb(v, dev->iobase + DAQP_CONTROL);
+ outb(DAQP_CONTROL_TRIGGER_ONESHOT | DAQP_CONTROL_TRIGGER_INTERNAL |
+ DAQP_CONTROL_PACER_CLK_100KHZ | DAQP_CONTROL_EOS_INT_ENABLE,
+ dev->iobase + DAQP_CONTROL);
/* Reset any pending interrupts (my card has a tendency to require
* require multiple reads on the status register to achieve this)
@@ -459,9 +457,7 @@ static int daqp_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
int counter;
int scanlist_start_on_every_entry;
int threshold;
-
int i;
- int v;
if (devpriv->stop)
return -EIO;
@@ -607,11 +603,9 @@ static int daqp_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
outb((DAQP_FIFO_SIZE - threshold) >> 8, dev->iobase + DAQP_FIFO);
/* Set trigger */
-
- v = DAQP_CONTROL_TRIGGER_CONTINUOUS | DAQP_CONTROL_TRIGGER_INTERNAL
- | DAQP_CONTROL_PACER_5MHz | DAQP_CONTROL_FIFO_INT_ENABLE;
-
- outb(v, dev->iobase + DAQP_CONTROL);
+ outb(DAQP_CONTROL_TRIGGER_CONTINUOUS | DAQP_CONTROL_TRIGGER_INTERNAL |
+ DAQP_CONTROL_PACER_CLK_5MHZ | DAQP_CONTROL_FIFO_INT_ENABLE,
+ dev->iobase + DAQP_CONTROL);
/* Reset any pending interrupts (my card has a tendency to require
* require multiple reads on the status register to achieve this)
--
2.5.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
