Use the BIT macro to define the register bits. Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> Cc: Ian Abbott <abbotti@xxxxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/staging/comedi/drivers/rtd520.c | 54 ++++++++++++++++----------------- 1 file changed, 27 insertions(+), 27 deletions(-) diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c index 4c13f5e..9485e84 100644 --- a/drivers/staging/comedi/drivers/rtd520.c +++ b/drivers/staging/comedi/drivers/rtd520.c @@ -106,39 +106,39 @@ */ #define LAS0_USER_IO 0x0008 /* User I/O */ #define LAS0_ADC 0x0010 /* FIFO Status/Software A/D Start */ -#define FS_DAC1_NOT_EMPTY (1 << 0) /* DAC1 FIFO not empty */ -#define FS_DAC1_HEMPTY (1 << 1) /* DAC1 FIFO half empty */ -#define FS_DAC1_NOT_FULL (1 << 2) /* DAC1 FIFO not full */ -#define FS_DAC2_NOT_EMPTY (1 << 4) /* DAC2 FIFO not empty */ -#define FS_DAC2_HEMPTY (1 << 5) /* DAC2 FIFO half empty */ -#define FS_DAC2_NOT_FULL (1 << 6) /* DAC2 FIFO not full */ -#define FS_ADC_NOT_EMPTY (1 << 8) /* ADC FIFO not empty */ -#define FS_ADC_HEMPTY (1 << 9) /* ADC FIFO half empty */ -#define FS_ADC_NOT_FULL (1 << 10) /* ADC FIFO not full */ -#define FS_DIN_NOT_EMPTY (1 << 12) /* DIN FIFO not empty */ -#define FS_DIN_HEMPTY (1 << 13) /* DIN FIFO half empty */ -#define FS_DIN_NOT_FULL (1 << 14) /* DIN FIFO not full */ +#define FS_DAC1_NOT_EMPTY BIT(0) /* DAC1 FIFO not empty */ +#define FS_DAC1_HEMPTY BIT(1) /* DAC1 FIFO half empty */ +#define FS_DAC1_NOT_FULL BIT(2) /* DAC1 FIFO not full */ +#define FS_DAC2_NOT_EMPTY BIT(4) /* DAC2 FIFO not empty */ +#define FS_DAC2_HEMPTY BIT(5) /* DAC2 FIFO half empty */ +#define FS_DAC2_NOT_FULL BIT(6) /* DAC2 FIFO not full */ +#define FS_ADC_NOT_EMPTY BIT(8) /* ADC FIFO not empty */ +#define FS_ADC_HEMPTY BIT(9) /* ADC FIFO half empty */ +#define FS_ADC_NOT_FULL BIT(10) /* ADC FIFO not full */ +#define FS_DIN_NOT_EMPTY BIT(12) /* DIN FIFO not empty */ +#define FS_DIN_HEMPTY BIT(13) /* DIN FIFO half empty */ +#define FS_DIN_NOT_FULL BIT(14) /* DIN FIFO not full */ #define LAS0_DAC1 0x0014 /* Software D/A1 Update (w) */ #define LAS0_DAC2 0x0018 /* Software D/A2 Update (w) */ #define LAS0_DAC 0x0024 /* Software Simultaneous Update (w) */ #define LAS0_PACER 0x0028 /* Software Pacer Start/Stop */ #define LAS0_TIMER 0x002c /* Timer Status/HDIN Software Trig. */ #define LAS0_IT 0x0030 /* Interrupt Status/Enable */ -#define IRQM_ADC_FIFO_WRITE (1 << 0) /* ADC FIFO Write */ -#define IRQM_CGT_RESET (1 << 1) /* Reset CGT */ -#define IRQM_CGT_PAUSE (1 << 3) /* Pause CGT */ -#define IRQM_ADC_ABOUT_CNT (1 << 4) /* About Counter out */ -#define IRQM_ADC_DELAY_CNT (1 << 5) /* Delay Counter out */ -#define IRQM_ADC_SAMPLE_CNT (1 << 6) /* ADC Sample Counter */ -#define IRQM_DAC1_UCNT (1 << 7) /* DAC1 Update Counter */ -#define IRQM_DAC2_UCNT (1 << 8) /* DAC2 Update Counter */ -#define IRQM_UTC1 (1 << 9) /* User TC1 out */ -#define IRQM_UTC1_INV (1 << 10) /* User TC1 out, inverted */ -#define IRQM_UTC2 (1 << 11) /* User TC2 out */ -#define IRQM_DIGITAL_IT (1 << 12) /* Digital Interrupt */ -#define IRQM_EXTERNAL_IT (1 << 13) /* External Interrupt */ -#define IRQM_ETRIG_RISING (1 << 14) /* Ext Trigger rising-edge */ -#define IRQM_ETRIG_FALLING (1 << 15) /* Ext Trigger falling-edge */ +#define IRQM_ADC_FIFO_WRITE BIT(0) /* ADC FIFO Write */ +#define IRQM_CGT_RESET BIT(1) /* Reset CGT */ +#define IRQM_CGT_PAUSE BIT(3) /* Pause CGT */ +#define IRQM_ADC_ABOUT_CNT BIT(4) /* About Counter out */ +#define IRQM_ADC_DELAY_CNT BIT(5) /* Delay Counter out */ +#define IRQM_ADC_SAMPLE_CNT BIT(6) /* ADC Sample Counter */ +#define IRQM_DAC1_UCNT BIT(7) /* DAC1 Update Counter */ +#define IRQM_DAC2_UCNT BIT(8) /* DAC2 Update Counter */ +#define IRQM_UTC1 BIT(9) /* User TC1 out */ +#define IRQM_UTC1_INV BIT(10) /* User TC1 out, inverted */ +#define IRQM_UTC2 BIT(11) /* User TC2 out */ +#define IRQM_DIGITAL_IT BIT(12) /* Digital Interrupt */ +#define IRQM_EXTERNAL_IT BIT(13) /* External Interrupt */ +#define IRQM_ETRIG_RISING BIT(14) /* Ext Trigger rising-edge */ +#define IRQM_ETRIG_FALLING BIT(15) /* Ext Trigger falling-edge */ #define LAS0_CLEAR 0x0034 /* Clear/Set Interrupt Clear Mask */ #define LAS0_OVERRUN 0x0038 /* Pending interrupts/Clear Overrun */ #define LAS0_PCLK 0x0040 /* Pacer Clock (24bit) */ -- 2.5.1 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
