From: "Kim, Leo" <leo.kim@xxxxxxxxx>
This patch removes the preprocessor definition, NM73131_0_BOARD which is
not used anymore.
Signed-off-by: Leo Kim <leo.kim@xxxxxxxxx>
Signed-off-by: Tony Cho <tony.cho@xxxxxxxxx>
---
drivers/staging/wilc1000/linux_wlan.c | 40 --------------
drivers/staging/wilc1000/linux_wlan_common.h | 7 +--
drivers/staging/wilc1000/linux_wlan_sdio.c | 8 +--
drivers/staging/wilc1000/linux_wlan_spi.c | 75 +--------------------------
drivers/staging/wilc1000/wilc_wfi_netdevice.h | 4 +-
5 files changed, 5 insertions(+), 129 deletions(-)
diff --git a/drivers/staging/wilc1000/linux_wlan.c b/drivers/staging/wilc1000/linux_wlan.c
index dc297fc..b24cb75 100644
--- a/drivers/staging/wilc1000/linux_wlan.c
+++ b/drivers/staging/wilc1000/linux_wlan.c
@@ -471,8 +471,6 @@ static int init_irq(linux_wlan_t *p_nic)
*
* ex) nic->dev_irq_num = gpio_to_irq(GPIO_NUM);
*/
-#elif defined(NM73131_0_BOARD)
- nic->dev_irq_num = IRQ_WILC1000;
#elif defined(PANDA_BOARD)
gpio_export(GPIO_NUM, 1);
nic->dev_irq_num = OMAP_GPIO_IRQ(GPIO_NUM);
@@ -1719,7 +1717,6 @@ _fail_locks_:
* - this function will be called automatically by OS when module inserted.
*/
-#if !defined(NM73131_0_BOARD)
int mac_init_fn(struct net_device *ndev)
{
@@ -1729,28 +1726,11 @@ int mac_init_fn(struct net_device *ndev)
return 0;
}
-#else
-int mac_init_fn(struct net_device *ndev)
-{
-
- unsigned char mac_add[] = {0x00, 0x50, 0xc2, 0x5e, 0x10, 0x00};
- /* TODO: get MAC address whenever the source is EPROM - hardcoded and copy it to ndev*/
- memcpy(ndev->dev_addr, mac_add, 6);
-
- if (!is_valid_ether_addr(ndev->dev_addr)) {
- PRINT_ER("Error: Wrong MAC address\n");
- return -EINVAL;
- }
-
- return 0;
-}
-#endif
void WILC_WFI_frame_register(struct wiphy *wiphy, struct net_device *dev,
u16 frame_type, bool reg);
/* This fn is called, when this device is setup using ifconfig */
-#if !defined(NM73131_0_BOARD)
int mac_open(struct net_device *ndev)
{
perInterface_wlan_t *nic;
@@ -1822,26 +1802,6 @@ _err_:
wilc1000_wlan_deinit(g_linux_wlan);
return ret;
}
-#else
-int mac_open(struct net_device *ndev)
-{
-
- linux_wlan_t *nic;
-
- nic = netdev_priv(ndev);
-
- /*initialize platform*/
- if (wilc1000_wlan_init(nic)) {
- PRINT_ER("Failed to initialize platform\n");
- return 1;
- }
- /* Start the network interface queue for this device */
- PRINT_D(INIT_DBG, "Starting netifQ\n");
- netif_start_queue(ndev);
-/* down(&close_exit_sync); */
- return 0;
-}
-#endif
struct net_device_stats *mac_stats(struct net_device *dev)
{
diff --git a/drivers/staging/wilc1000/linux_wlan_common.h b/drivers/staging/wilc1000/linux_wlan_common.h
index e6ebf3e..ea121f9 100644
--- a/drivers/staging/wilc1000/linux_wlan_common.h
+++ b/drivers/staging/wilc1000/linux_wlan_common.h
@@ -135,12 +135,7 @@ extern atomic_t DEBUG_LEVEL;
#define WILC_MULTICAST_TABLE_SIZE 8
-#if defined (NM73131_0_BOARD)
-
-#define MODALIAS "wilc_spi"
-#define GPIO_NUM IRQ_WILC1000_GPIO
-
-#elif defined (BEAGLE_BOARD)
+#if defined (BEAGLE_BOARD)
#define SPI_CHANNEL 4
#if SPI_CHANNEL == 4
diff --git a/drivers/staging/wilc1000/linux_wlan_sdio.c b/drivers/staging/wilc1000/linux_wlan_sdio.c
index 62e6b62..1120a0f 100644
--- a/drivers/staging/wilc1000/linux_wlan_sdio.c
+++ b/drivers/staging/wilc1000/linux_wlan_sdio.c
@@ -8,15 +8,9 @@
-#if defined (NM73131_0_BOARD)
-#define SDIO_MODALIAS "wilc_sdio"
-#else
#define SDIO_MODALIAS "wilc1000_sdio"
-#endif
-#if defined (NM73131_0_BOARD)
- #define MAX_SPEED 50000000
-#elif defined(CUSTOMER_PLATFORM)
+#if defined(CUSTOMER_PLATFORM)
/* TODO : User have to stable bus clock as user's environment. */
#ifdef MAX_BUS_SPEED
#define MAX_SPEED MAX_BUS_SPEED
diff --git a/drivers/staging/wilc1000/linux_wlan_spi.c b/drivers/staging/wilc1000/linux_wlan_spi.c
index c5cdab7..8bcbed8 100644
--- a/drivers/staging/wilc1000/linux_wlan_spi.c
+++ b/drivers/staging/wilc1000/linux_wlan_spi.c
@@ -113,45 +113,7 @@ int linux_spi_init(void *vp)
#define TXRX_PHASE_SIZE (4096)
#endif
-#if defined (NM73131_0_BOARD)
-
-int linux_spi_write(uint8_t *b, uint32_t len)
-{
-
- int ret;
-
- if (len > 0 && b != NULL) {
- struct spi_message msg;
-
- PRINT_D(BUS_DBG, "Request writing %d bytes\n", len);
- struct spi_transfer tr = {
- .tx_buf = b,
- .len = len,
- .speed_hz = SPEED,
- .delay_usecs = 0,
- };
-
- spi_message_init(&msg);
- spi_message_add_tail(&tr, &msg);
- ret = spi_sync(wilc_spi_dev, &msg);
- if (ret < 0) {
- PRINT_ER("SPI transaction failed\n");
- }
-
- } else {
- PRINT_ER("can't write data with the following length: %d\n", len);
- PRINT_ER("FAILED due to NULL buffer or ZERO length check the following length: %d\n", len);
- ret = -1;
- }
-
- /* change return value to match WILC interface */
- (ret < 0) ? (ret = 0) : (ret = 1);
-
-
- return ret;
-}
-
-#elif defined(TXRX_PHASE_SIZE)
+#if defined(TXRX_PHASE_SIZE)
int linux_spi_write(uint8_t *b, uint32_t len)
{
@@ -282,40 +244,7 @@ int linux_spi_write(uint8_t *b, uint32_t len)
#endif
-#if defined (NM73131_0_BOARD)
-
-int linux_spi_read(unsigned char *rb, unsigned long rlen)
-{
-
- int ret;
-
- if (rlen > 0) {
- struct spi_message msg;
- struct spi_transfer tr = {
- .rx_buf = rb,
- .len = rlen,
- .speed_hz = SPEED,
- .delay_usecs = 0,
-
- };
-
- spi_message_init(&msg);
- spi_message_add_tail(&tr, &msg);
- ret = spi_sync(wilc_spi_dev, &msg);
- if (ret < 0) {
- PRINT_ER("SPI transaction failed\n");
- }
- } else {
- PRINT_ER("can't read data with the following length: %ld\n", rlen);
- ret = -1;
- }
- /* change return value to match WILC interface */
- (ret < 0) ? (ret = 0) : (ret = 1);
-
- return ret;
-}
-
-#elif defined(TXRX_PHASE_SIZE)
+#if defined(TXRX_PHASE_SIZE)
int linux_spi_read(unsigned char *rb, unsigned long rlen)
{
diff --git a/drivers/staging/wilc1000/wilc_wfi_netdevice.h b/drivers/staging/wilc1000/wilc_wfi_netdevice.h
index 27c6920..e1caea9 100644
--- a/drivers/staging/wilc1000/wilc_wfi_netdevice.h
+++ b/drivers/staging/wilc1000/wilc_wfi_netdevice.h
@@ -80,9 +80,7 @@ struct WILC_WFI_stats {
* LPC3131 which is important to get the MAC start status when you are blocked
* inside linux_wlan_firmware_download() which blocks mac_open().
*/
-#if defined(NM73131_0_BOARD)
- #define RX_BH_TYPE RX_BH_KTHREAD
-#elif defined(PANDA_BOARD)
+#if defined(PANDA_BOARD)
#define RX_BH_TYPE RX_BH_THREADED_IRQ
#else
#define RX_BH_TYPE RX_BH_KTHREAD
--
1.9.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
