Calling the setup of the SPI master directly causes a NULL pointer
dereference with master drivers without a separate setup function.
This problem is reproduceable on ARM MXS platform.
So fix this issue by using spi_setup() instead.
Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
---
drivers/staging/fbtft/fb_uc1611.c | 2 +-
drivers/staging/fbtft/fb_watterott.c | 4 ++--
drivers/staging/fbtft/fbtft-core.c | 4 ++--
drivers/staging/fbtft/flexfb.c | 4 ++--
4 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/staging/fbtft/fb_uc1611.c b/drivers/staging/fbtft/fb_uc1611.c
index 32f3a9d..5cafa50 100644
--- a/drivers/staging/fbtft/fb_uc1611.c
+++ b/drivers/staging/fbtft/fb_uc1611.c
@@ -76,7 +76,7 @@ static int init_display(struct fbtft_par *par)
/* Set CS active high */
par->spi->mode |= SPI_CS_HIGH;
- ret = par->spi->master->setup(par->spi);
+ ret = spi_setup(par->spi);
if (ret) {
dev_err(par->info->device, "Could not set SPI_CS_HIGH\n");
return ret;
diff --git a/drivers/staging/fbtft/fb_watterott.c b/drivers/staging/fbtft/fb_watterott.c
index 88fb2c0..8eae6ef 100644
--- a/drivers/staging/fbtft/fb_watterott.c
+++ b/drivers/staging/fbtft/fb_watterott.c
@@ -169,7 +169,7 @@ static int init_display(struct fbtft_par *par)
/* enable SPI interface by having CS and MOSI low during reset */
save_mode = par->spi->mode;
par->spi->mode |= SPI_CS_HIGH;
- ret = par->spi->master->setup(par->spi); /* set CS inactive low */
+ ret = spi_setup(par->spi); /* set CS inactive low */
if (ret) {
dev_err(par->info->device, "Could not set SPI_CS_HIGH\n");
return ret;
@@ -180,7 +180,7 @@ static int init_display(struct fbtft_par *par)
par->fbtftops.reset(par);
mdelay(1000);
par->spi->mode = save_mode;
- ret = par->spi->master->setup(par->spi);
+ ret = spi_setup(par->spi);
if (ret) {
dev_err(par->info->device, "Could not restore SPI mode\n");
return ret;
diff --git a/drivers/staging/fbtft/fbtft-core.c b/drivers/staging/fbtft/fbtft-core.c
index 23392eb..3638554 100644
--- a/drivers/staging/fbtft/fbtft-core.c
+++ b/drivers/staging/fbtft/fbtft-core.c
@@ -1437,12 +1437,12 @@ int fbtft_probe_common(struct fbtft_display *display,
/* 9-bit SPI setup */
if (par->spi && display->buswidth == 9) {
par->spi->bits_per_word = 9;
- ret = par->spi->master->setup(par->spi);
+ ret = spi_setup(par->spi);
if (ret) {
dev_warn(&par->spi->dev,
"9-bit SPI not available, emulating using 8-bit.\n");
par->spi->bits_per_word = 8;
- ret = par->spi->master->setup(par->spi);
+ ret = spi_setup(par->spi);
if (ret)
goto out_release;
/* allocate buffer with room for dc bits */
diff --git a/drivers/staging/fbtft/flexfb.c b/drivers/staging/fbtft/flexfb.c
index c763efc..09fd15d 100644
--- a/drivers/staging/fbtft/flexfb.c
+++ b/drivers/staging/fbtft/flexfb.c
@@ -464,12 +464,12 @@ static int flexfb_probe_common(struct spi_device *sdev,
par->fbtftops.write_register = fbtft_write_reg8_bus9;
par->fbtftops.write_vmem = fbtft_write_vmem16_bus9;
sdev->bits_per_word = 9;
- ret = sdev->master->setup(sdev);
+ ret = spi_setup(sdev);
if (ret) {
dev_warn(dev,
"9-bit SPI not available, emulating using 8-bit.\n");
sdev->bits_per_word = 8;
- ret = sdev->master->setup(sdev);
+ ret = spi_setup(sdev);
if (ret)
goto out_release;
/* allocate buffer with room for dc bits */
--
1.7.9.5
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
