Tidy up the block comments to fix the checkpatch.pl warnings.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/s526.c | 57 +++++++++++++++++++----------------
1 file changed, 31 insertions(+), 26 deletions(-)
diff --git a/drivers/staging/comedi/drivers/s526.c b/drivers/staging/comedi/drivers/s526.c
index 43f9c0c..d70c979 100644
--- a/drivers/staging/comedi/drivers/s526.c
+++ b/drivers/staging/comedi/drivers/s526.c
@@ -176,15 +176,17 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
unsigned int val;
union cmReg cmReg;
- /* Check what type of Counter the user requested, data[0] contains */
- /* the Application type */
+ /*
+ * Check what type of Counter the user requested
+ * data[0] contains the Application type
+ */
switch (data[0]) {
case INSN_CONFIG_GPCT_QUADRATURE_ENCODER:
/*
- data[0]: Application Type
- data[1]: Counter Mode Register Value
- data[2]: Pre-load Register Value
- data[3]: Conter Control Register
+ * data[0]: Application Type
+ * data[1]: Counter Mode Register Value
+ * data[2]: Pre-load Register Value
+ * data[3]: Conter Control Register
*/
devpriv->gpct_config[chan] = data[0];
@@ -214,11 +216,13 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
cmReg.reg.clockSource = 0;
/* When to take into account the indexpulse: */
- /*if (data[2] == GPCT_IndexPhaseLowLow) {
- } else if (data[2] == GPCT_IndexPhaseLowHigh) {
- } else if (data[2] == GPCT_IndexPhaseHighLow) {
- } else if (data[2] == GPCT_IndexPhaseHighHigh) {
- }*/
+ /*
+ * if (data[2] == GPCT_IndexPhaseLowLow) {
+ * } else if (data[2] == GPCT_IndexPhaseLowHigh) {
+ * } else if (data[2] == GPCT_IndexPhaseHighLow) {
+ * } else if (data[2] == GPCT_IndexPhaseHighHigh) {
+ * }
+ */
/* Take into account the index pulse? */
if (data[3] == GPCT_RESET_COUNTER_ON_INDEX)
/* Auto load with INDEX^ */
@@ -248,11 +252,11 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
case INSN_CONFIG_GPCT_SINGLE_PULSE_GENERATOR:
/*
- data[0]: Application Type
- data[1]: Counter Mode Register Value
- data[2]: Pre-load Register 0 Value
- data[3]: Pre-load Register 1 Value
- data[4]: Conter Control Register
+ * data[0]: Application Type
+ * data[1]: Counter Mode Register Value
+ * data[2]: Pre-load Register 0 Value
+ * data[3]: Pre-load Register 1 Value
+ * data[4]: Conter Control Register
*/
devpriv->gpct_config[chan] = data[0];
@@ -281,11 +285,11 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
case INSN_CONFIG_GPCT_PULSE_TRAIN_GENERATOR:
/*
- data[0]: Application Type
- data[1]: Counter Mode Register Value
- data[2]: Pre-load Register 0 Value
- data[3]: Pre-load Register 1 Value
- data[4]: Conter Control Register
+ * data[0]: Application Type
+ * data[1]: Counter Mode Register Value
+ * data[2]: Pre-load Register 0 Value
+ * data[3]: Pre-load Register 1 Value
+ * data[4]: Conter Control Register
*/
devpriv->gpct_config[chan] = data[0];
@@ -332,11 +336,12 @@ static int s526_gpct_winsn(struct comedi_device *dev,
/* Check what Application of Counter this channel is configured for */
switch (devpriv->gpct_config[chan]) {
case INSN_CONFIG_GPCT_PULSE_TRAIN_GENERATOR:
- /* data[0] contains the PULSE_WIDTH
- data[1] contains the PULSE_PERIOD
- @pre PULSE_PERIOD > PULSE_WIDTH > 0
- The above periods must be expressed as a multiple of the
- pulse frequency on the selected source
+ /*
+ * data[0] contains the PULSE_WIDTH
+ * data[1] contains the PULSE_PERIOD
+ * @pre PULSE_PERIOD > PULSE_WIDTH > 0
+ * The above periods must be expressed as a multiple of the
+ * pulse frequency on the selected source
*/
if ((data[1] <= data[0]) || !data[0])
return -EINVAL;
--
2.4.3
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
