For aesthetics, add some whitespace to the subdevice initialization. Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> Cc: Ian Abbott <abbotti@xxxxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/staging/comedi/drivers/s526.c | 73 ++++++++++++++++++----------------- 1 file changed, 38 insertions(+), 35 deletions(-) diff --git a/drivers/staging/comedi/drivers/s526.c b/drivers/staging/comedi/drivers/s526.c index 9ed3edd..242db7d 100644 --- a/drivers/staging/comedi/drivers/s526.c +++ b/drivers/staging/comedi/drivers/s526.c @@ -561,51 +561,54 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it) if (ret) return ret; + /* General-Purpose Counter/Timer (GPCT) */ s = &dev->subdevices[0]; - /* GENERAL-PURPOSE COUNTER/TIME (GPCT) */ - s->type = COMEDI_SUBD_COUNTER; - s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL; - s->n_chan = 4; - s->maxdata = 0x00ffffff; /* 24 bit counter */ - s->insn_read = s526_gpct_rinsn; - s->insn_config = s526_gpct_insn_config; - s->insn_write = s526_gpct_winsn; + s->type = COMEDI_SUBD_COUNTER; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL; + s->n_chan = 4; + s->maxdata = 0x00ffffff; + s->insn_read = s526_gpct_rinsn; + s->insn_config = s526_gpct_insn_config; + s->insn_write = s526_gpct_winsn; + /* + * Analog Input subdevice + * channels 0 to 7 are the regular differential inputs + * channel 8 is "reference 0" (+10V) + * channel 9 is "reference 1" (0V) + */ s = &dev->subdevices[1]; - /* analog input subdevice */ - s->type = COMEDI_SUBD_AI; - s->subdev_flags = SDF_READABLE | SDF_DIFF; - /* channels 0 to 7 are the regular differential inputs */ - /* channel 8 is "reference 0" (+10V), channel 9 is "reference 1" (0V) */ - s->n_chan = 10; - s->maxdata = 0xffff; - s->range_table = &range_bipolar10; - s->len_chanlist = 16; - s->insn_read = s526_ai_rinsn; - s->insn_config = s526_ai_insn_config; - + s->type = COMEDI_SUBD_AI; + s->subdev_flags = SDF_READABLE | SDF_DIFF; + s->n_chan = 10; + s->maxdata = 0xffff; + s->range_table = &range_bipolar10; + s->len_chanlist = 16; + s->insn_read = s526_ai_rinsn; + s->insn_config = s526_ai_insn_config; + + /* Analog Output subdevice */ s = &dev->subdevices[2]; - /* analog output subdevice */ - s->type = COMEDI_SUBD_AO; - s->subdev_flags = SDF_WRITABLE; - s->n_chan = 4; - s->maxdata = 0xffff; - s->range_table = &range_bipolar10; - s->insn_write = s526_ao_insn_write; + s->type = COMEDI_SUBD_AO; + s->subdev_flags = SDF_WRITABLE; + s->n_chan = 4; + s->maxdata = 0xffff; + s->range_table = &range_bipolar10; + s->insn_write = s526_ao_insn_write; ret = comedi_alloc_subdev_readback(s); if (ret) return ret; + /* Digital I/O subdevice */ s = &dev->subdevices[3]; - /* digital i/o subdevice */ - s->type = COMEDI_SUBD_DIO; - s->subdev_flags = SDF_READABLE | SDF_WRITABLE; - s->n_chan = 8; - s->maxdata = 1; - s->range_table = &range_digital; - s->insn_bits = s526_dio_insn_bits; - s->insn_config = s526_dio_insn_config; + s->type = COMEDI_SUBD_DIO; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE; + s->n_chan = 8; + s->maxdata = 1; + s->range_table = &range_digital; + s->insn_bits = s526_dio_insn_bits; + s->insn_config = s526_dio_insn_config; return 0; } -- 2.4.3 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
