Re: [PATCH] zram: Replace pr_* with dev_*

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sanjeev,

thanx for comments.

best regards,
salah triki

On Wed, Aug 05, 2015 at 10:10:58AM +0530, sanjeev sharma wrote:
> Hello Salah,
> 
> It would be good,if you provide some information why you are doing so like
> " messages that are associated with a particular device"  should be tagged
> with the right level: dev_err(), dev_warn(), dev_info(), and so forth.
> 
> Regards
> Sanjeev Sharma
> 
> 
> On Tue, Aug 4, 2015 at 11:49 PM, Salah Triki <salah.triki@xxxxxxx> wrote:
> 
> > This patch replaces pr_info/pr_warn/pr_err with
> > dev_info/dev_warn/dev_err.
> >
> > Signed-off-by: Salah Triki <salah.triki@xxxxxxx>
> > ---
> >  drivers/block/zram/zram_drv.c | 40
> > +++++++++++++++++++++++-----------------
> >  1 file changed, 23 insertions(+), 17 deletions(-)
> >
> > diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
> > index fb655e8..8eecb72 100644
> > --- a/drivers/block/zram/zram_drv.c
> > +++ b/drivers/block/zram/zram_drv.c
> > @@ -333,7 +333,8 @@ static ssize_t max_comp_streams_store(struct device
> > *dev,
> >         down_write(&zram->init_lock);
> >         if (init_done(zram)) {
> >                 if (!zcomp_set_max_streams(zram->comp, num)) {
> > -                       pr_info("Cannot change max compression streams\n");
> > +                       dev_warn(dev, "Cannot change max compression
> > streams to %d",
> > +                               num);
> >                         ret = -EINVAL;
> >                         goto out;
> >                 }
> > @@ -368,7 +369,7 @@ static ssize_t comp_algorithm_store(struct device *dev,
> >         down_write(&zram->init_lock);
> >         if (init_done(zram)) {
> >                 up_write(&zram->init_lock);
> > -               pr_info("Can't change algorithm for initialized device\n");
> > +               dev_warn(dev, "Can't change algorithm for initialized
> > device");
> >                 return -EBUSY;
> >         }
> >         strlcpy(zram->compressor, buf, sizeof(zram->compressor));
> > @@ -508,14 +509,15 @@ static struct zram_meta *zram_meta_alloc(int
> > device_id, u64 disksize)
> >         num_pages = disksize >> PAGE_SHIFT;
> >         meta->table = vzalloc(num_pages * sizeof(*meta->table));
> >         if (!meta->table) {
> > -               pr_err("Error allocating zram address table\n");
> > +               dev_err("Error allocating zram address table for device
> > %d",
> > +                       device_id);
> >                 goto out_error;
> >         }
> >
> >         snprintf(pool_name, sizeof(pool_name), "zram%d", device_id);
> >         meta->mem_pool = zs_create_pool(pool_name, GFP_NOIO |
> > __GFP_HIGHMEM);
> >         if (!meta->mem_pool) {
> > -               pr_err("Error creating memory pool\n");
> > +               dev_err("Error creating memory pool for device %d",
> > device_id);
> >                 goto out_error;
> >         }
> >
> > @@ -587,7 +589,8 @@ static int zram_decompress_page(struct zram *zram,
> > char *mem, u32 index)
> >
> >         /* Should NEVER happen. Return bio error if it does. */
> >         if (unlikely(ret)) {
> > -               pr_err("Decompression failed! err=%d, page=%u\n", ret,
> > index);
> > +               dev_err(disk_to_dev(zram->disk), "Decompression failed!
> > err=%d, page=%u",
> > +                       ret, index);
> >                 return ret;
> >         }
> >
> > @@ -621,7 +624,7 @@ static int zram_bvec_read(struct zram *zram, struct
> > bio_vec *bvec,
> >                 uncmem = user_mem;
> >
> >         if (!uncmem) {
> > -               pr_info("Unable to allocate temp memory\n");
> > +               dev_warn("Unable to allocate temp memory");
> >                 ret = -ENOMEM;
> >                 goto out_cleanup;
> >         }
> > @@ -706,7 +709,8 @@ static int zram_bvec_write(struct zram *zram, struct
> > bio_vec *bvec, u32 index,
> >         }
> >
> >         if (unlikely(ret)) {
> > -               pr_err("Compression failed! err=%d\n", ret);
> > +               dev_err(disk_to_dev(zram->disk), "Compression failed!
> > err=%d",
> > +                       ret);
> >                 goto out;
> >         }
> >         src = zstrm->buffer;
> > @@ -718,7 +722,7 @@ static int zram_bvec_write(struct zram *zram, struct
> > bio_vec *bvec, u32 index,
> >
> >         handle = zs_malloc(meta->mem_pool, clen);
> >         if (!handle) {
> > -               pr_info("Error allocating memory for compressed page: %u,
> > size=%zu\n",
> > +               dev_warn(dev, "Error allocating memory for compressed
> > page: %u, size=%zu",
> >                         index, clen);
> >                 ret = -ENOMEM;
> >                 goto out;
> > @@ -1037,7 +1041,7 @@ static ssize_t disksize_store(struct device *dev,
> >
> >         comp = zcomp_create(zram->compressor, zram->max_comp_streams);
> >         if (IS_ERR(comp)) {
> > -               pr_info("Cannot initialise %s compressing backend\n",
> > +               dev_info(dev, "Cannot initialise %s compressing backend",
> >                                 zram->compressor);
> >                 err = PTR_ERR(comp);
> >                 goto out_free_meta;
> > @@ -1045,7 +1049,7 @@ static ssize_t disksize_store(struct device *dev,
> >
> >         down_write(&zram->init_lock);
> >         if (init_done(zram)) {
> > -               pr_info("Cannot change disksize for initialized device\n");
> > +               dev_warn(dev, "Cannot change disksize for initialized
> > device");
> >                 err = -EBUSY;
> >                 goto out_destroy_comp;
> >         }
> > @@ -1204,7 +1208,7 @@ static int zram_add(void)
> >
> >         queue = blk_alloc_queue(GFP_KERNEL);
> >         if (!queue) {
> > -               pr_err("Error allocating disk queue for device %d\n",
> > +               dev_err("Error allocating disk queue for device %d",
> >                         device_id);
> >                 ret = -ENOMEM;
> >                 goto out_free_idr;
> > @@ -1215,7 +1219,7 @@ static int zram_add(void)
> >         /* gendisk structure */
> >         zram->disk = alloc_disk(1);
> >         if (!zram->disk) {
> > -               pr_warn("Error allocating disk structure for device %d\n",
> > +               dev_warn("Error allocating disk structure for device %d",
> >                         device_id);
> >                 ret = -ENOMEM;
> >                 goto out_free_queue;
> > @@ -1264,14 +1268,15 @@ static int zram_add(void)
> >         ret = sysfs_create_group(&disk_to_dev(zram->disk)->kobj,
> >                                 &zram_disk_attr_group);
> >         if (ret < 0) {
> > -               pr_warn("Error creating sysfs group");
> > +               dev_warn(disk_to_dev(zram->disk), "Error creating sysfs
> > group");
> >                 goto out_free_disk;
> >         }
> >         strlcpy(zram->compressor, default_compressor,
> > sizeof(zram->compressor));
> >         zram->meta = NULL;
> >         zram->max_comp_streams = 1;
> >
> > -       pr_info("Added device: %s\n", zram->disk->disk_name);
> > +       dev_info(disk_to_dev(zram->disk), "Added device: %s",
> > +               zram->disk->disk_name);
> >         return device_id;
> >
> >  out_free_disk:
> > @@ -1319,7 +1324,8 @@ static int zram_remove(struct zram *zram)
> >         zram_reset_device(zram);
> >         bdput(bdev);
> >
> > -       pr_info("Removed device: %s\n", zram->disk->disk_name);
> > +       dev_info(disk_to_dev(zram->disk), "Removed device: %s",
> > +               zram->disk->disk_name);
> >
> >         idr_remove(&zram_index_idr, zram->disk->first_minor);
> >         blk_cleanup_queue(zram->disk->queue);
> > @@ -1404,13 +1410,13 @@ static int __init zram_init(void)
> >
> >         ret = class_register(&zram_control_class);
> >         if (ret) {
> > -               pr_warn("Unable to register zram-control class\n");
> > +               dev_warn("Unable to register zram-control class");
> >                 return ret;
> >         }
> >
> >         zram_major = register_blkdev(0, "zram");
> >         if (zram_major <= 0) {
> > -               pr_warn("Unable to get major number\n");
> > +               dev_warn("Unable to get major number");
> >                 class_unregister(&zram_control_class);
> >                 return -EBUSY;
> >         }
> > --
> > 1.9.1
> >
> > _______________________________________________
> > devel mailing list
> > devel@xxxxxxxxxxxxxxxxxxxxxx
> > http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
> >
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux