Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching
process. Function does the same that was done by chip-specific code inside
of epautoconf. Now this code can be removed from there to separate generic code
from platform specific logic.
Signed-off-by: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
---
drivers/usb/gadget/epautoconf.c | 23 +----------------------
drivers/usb/gadget/udc/net2280.c | 31 +++++++++++++++++++++++++++++++
2 files changed, 32 insertions(+), 22 deletions(-)
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index cc0b084..d41fd82 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -86,28 +86,7 @@ struct usb_ep *usb_ep_autoconfig_ss(
/* First, apply chip-specific "best usage" knowledge.
* This might make a good usb_gadget_ops hook ...
*/
- if (gadget_is_net2280(gadget)) {
- char name[8];
-
- if (type == USB_ENDPOINT_XFER_INT) {
- /* ep-e, ep-f are PIO with only 64 byte fifos */
- ep = gadget_find_ep_by_name(gadget, "ep-e");
- if (ep && usb_gadget_ep_match_desc(gadget,
- ep, desc, ep_comp))
- goto found_ep;
- ep = gadget_find_ep_by_name(gadget, "ep-f");
- if (ep && usb_gadget_ep_match_desc(gadget,
- ep, desc, ep_comp))
- goto found_ep;
- }
-
- /* USB3380: use same address for usb and hardware endpoints */
- snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc),
- usb_endpoint_dir_in(desc) ? "in" : "out");
- ep = gadget_find_ep_by_name(gadget, name);
- if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
- goto found_ep;
- } else if (gadget_is_goku (gadget)) {
+ if (gadget_is_goku (gadget)) {
if (USB_ENDPOINT_XFER_INT == type) {
/* single buffering is enough */
ep = gadget_find_ep_by_name(gadget, "ep3-bulk");
diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index 872ca25..9d7eac1 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -1550,6 +1550,36 @@ static int net2280_pullup(struct usb_gadget *_gadget, int is_on)
return 0;
}
+static struct usb_ep *net2280_match_ep(struct usb_gadget *_gadget,
+ struct usb_endpoint_descriptor *desc,
+ struct usb_ss_ep_comp_descriptor *ep_comp)
+{
+ char name[8];
+ struct usb_ep *ep;
+ u8 type;
+
+ type = usb_endpoint_type(desc);
+
+ if (type == USB_ENDPOINT_XFER_INT) {
+ /* ep-e, ep-f are PIO with only 64 byte fifos */
+ ep = gadget_find_ep_by_name(_gadget, "ep-e");
+ if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+ return ep;
+ ep = gadget_find_ep_by_name(_gadget, "ep-f");
+ if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+ return ep;
+ }
+
+ /* USB3380: use same address for usb and hardware endpoints */
+ snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc),
+ usb_endpoint_dir_in(desc) ? "in" : "out");
+ ep = gadget_find_ep_by_name(_gadget, name);
+ if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+ return ep;
+
+ return NULL;
+}
+
static int net2280_start(struct usb_gadget *_gadget,
struct usb_gadget_driver *driver);
static int net2280_stop(struct usb_gadget *_gadget);
@@ -1561,6 +1591,7 @@ static const struct usb_gadget_ops net2280_ops = {
.pullup = net2280_pullup,
.udc_start = net2280_start,
.udc_stop = net2280_stop,
+ .match_ep = net2280_match_ep,
};
/*-------------------------------------------------------------------------*/
--
1.9.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
