This patch removes unused preprocessor conditionals for the
PLAT_AML8726_M3_BACKUP and PLAT_AML8726_M3 which are not used and so
dead codes. They are also platform-dependent codes.
Signed-off-by: Tony Cho <tony.cho@xxxxxxxxx>
---
drivers/staging/wilc1000/wilc_sdio.c | 174 +----------------------------------
1 file changed, 1 insertion(+), 173 deletions(-)
diff --git a/drivers/staging/wilc1000/wilc_sdio.c b/drivers/staging/wilc1000/wilc_sdio.c
index 967df95..ea545c9 100644
--- a/drivers/staging/wilc1000/wilc_sdio.c
+++ b/drivers/staging/wilc1000/wilc_sdio.c
@@ -13,12 +13,7 @@
#ifdef WILC1000_SINGLE_TRANSFER
#define WILC_SDIO_BLOCK_SIZE 256
#else
- #if defined(PLAT_AML8726_M3) /* johnny */
- #define WILC_SDIO_BLOCK_SIZE 512
- #define MAX_SEG_SIZE (1 << 12) /* 4096 */
- #else
- #define WILC_SDIO_BLOCK_SIZE 512
- #endif
+#define WILC_SDIO_BLOCK_SIZE 512
#endif
typedef struct {
@@ -356,88 +351,6 @@ static int sdio_write(uint32_t addr, uint8_t *buf, uint32_t size)
nleft = size % block_size;
if (nblk > 0) {
-
-#if defined(PLAT_AML8726_M3_BACKUP) /* johnny */
- int i;
-
- for (i = 0; i < nblk; i++) {
- cmd.block_mode = 0; /* 1; */
- cmd.increment = 1;
- cmd.count = block_size; /* nblk; */
- cmd.buffer = buf;
- cmd.block_size = block_size;
- if (addr > 0) {
- if (!sdio_set_func0_csa_address(addr))
- goto _fail_;
- }
- if (!g_sdio.sdio_cmd53(&cmd)) {
- g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd53 [%x], block send...\n", addr);
- goto _fail_;
- }
-
- if (addr > 0)
- addr += block_size; /* addr += nblk*block_size; */
-
- buf += block_size; /* buf += nblk*block_size; */
- }
-
-#elif defined(PLAT_AML8726_M3) /* johnny */
-
- int i;
- int rest;
- int seg_cnt;
-
- seg_cnt = (nblk * block_size) / MAX_SEG_SIZE;
- rest = (nblk * block_size) & (MAX_SEG_SIZE - 1);
-
- for (i = 0; i < seg_cnt; i++) {
- cmd.block_mode = 1;
- cmd.increment = 1;
- cmd.count = MAX_SEG_SIZE / block_size;
- cmd.buffer = buf;
- cmd.block_size = block_size;
-
- if (addr > 0) {
- if (!sdio_set_func0_csa_address(addr))
- goto _fail_;
- }
- if (!g_sdio.sdio_cmd53(&cmd)) {
- g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd53 [%x], block send...\n", addr);
- goto _fail_;
- }
-
- if (addr > 0)
- addr += MAX_SEG_SIZE;
-
- buf += MAX_SEG_SIZE;
-
- }
-
- if (rest > 0) {
- cmd.block_mode = 1;
- cmd.increment = 1;
- cmd.count = rest / block_size;
- cmd.buffer = buf;
- cmd.block_size = block_size; /* johnny : prevent it from setting unexpected value */
-
- if (addr > 0) {
- if (!sdio_set_func0_csa_address(addr))
- goto _fail_;
- }
- if (!g_sdio.sdio_cmd53(&cmd)) {
- g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd53 [%x], bytes send...\n", addr);
- goto _fail_;
- }
-
- if (addr > 0)
- addr += rest;
-
- buf += rest;
-
- }
-
-#else
-
cmd.block_mode = 1;
cmd.increment = 1;
cmd.count = nblk;
@@ -454,8 +367,6 @@ static int sdio_write(uint32_t addr, uint8_t *buf, uint32_t size)
if (addr > 0)
addr += nblk * block_size;
buf += nblk * block_size;
-
-#endif /* platform */
}
if (nleft > 0) {
@@ -582,87 +493,6 @@ static int sdio_read(uint32_t addr, uint8_t *buf, uint32_t size)
nleft = size % block_size;
if (nblk > 0) {
-
-#if defined(PLAT_AML8726_M3_BACKUP) /* johnny */
-
- int i;
-
- for (i = 0; i < nblk; i++) {
- cmd.block_mode = 0; /* 1; */
- cmd.increment = 1;
- cmd.count = block_size; /* nblk; */
- cmd.buffer = buf;
- cmd.block_size = block_size;
- if (addr > 0) {
- if (!sdio_set_func0_csa_address(addr))
- goto _fail_;
- }
- if (!g_sdio.sdio_cmd53(&cmd)) {
- g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd53 [%x], block read...\n", addr);
- goto _fail_;
- }
- if (addr > 0)
- addr += block_size; /* addr += nblk*block_size; */
- buf += block_size; /* buf += nblk*block_size; */
- }
-
-#elif defined(PLAT_AML8726_M3) /* johnny */
-
- int i;
- int rest;
- int seg_cnt;
-
- seg_cnt = (nblk * block_size) / MAX_SEG_SIZE;
- rest = (nblk * block_size) & (MAX_SEG_SIZE - 1);
-
- for (i = 0; i < seg_cnt; i++) {
- cmd.block_mode = 1;
- cmd.increment = 1;
- cmd.count = MAX_SEG_SIZE / block_size;
- cmd.buffer = buf;
- cmd.block_size = block_size;
-
- if (addr > 0) {
- if (!sdio_set_func0_csa_address(addr))
- goto _fail_;
- }
- if (!g_sdio.sdio_cmd53(&cmd)) {
- g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd53 [%x], block read...\n", addr);
- goto _fail_;
- }
-
- if (addr > 0)
- addr += MAX_SEG_SIZE;
-
- buf += MAX_SEG_SIZE;
-
- }
-
- if (rest > 0) {
- cmd.block_mode = 1;
- cmd.increment = 1;
- cmd.count = rest / block_size;
- cmd.buffer = buf;
- cmd.block_size = block_size; /* johnny : prevent it from setting unexpected value */
-
- if (addr > 0) {
- if (!sdio_set_func0_csa_address(addr))
- goto _fail_;
- }
- if (!g_sdio.sdio_cmd53(&cmd)) {
- g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd53 [%x], block read...\n", addr);
- goto _fail_;
- }
-
- if (addr > 0)
- addr += rest;
-
- buf += rest;
-
- }
-
-#else
-
cmd.block_mode = 1;
cmd.increment = 1;
cmd.count = nblk;
@@ -679,8 +509,6 @@ static int sdio_read(uint32_t addr, uint8_t *buf, uint32_t size)
if (addr > 0)
addr += nblk * block_size;
buf += nblk * block_size;
-
-#endif /* platform */
} /* if (nblk > 0) */
if (nleft > 0) {
--
1.9.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
