[PATCH 11/20] staging/lustre/obdclass: Move AT controls from sysctl to sysfs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Oleg Drokin <green@xxxxxxxxxxxxxx>

Adaptive Timeouts controls are being moved from /proc/sys/lustre
to /sys/fs/lustre

Signed-off-by: Oleg Drokin <green@xxxxxxxxxxxxxx>
---
 .../lustre/lustre/obdclass/linux/linux-sysctl.c    | 45 ++++--------------
 drivers/staging/lustre/sysfs-fs-lustre             | 53 ++++++++++++++++++++++
 2 files changed, 63 insertions(+), 35 deletions(-)

diff --git a/drivers/staging/lustre/lustre/obdclass/linux/linux-sysctl.c b/drivers/staging/lustre/lustre/obdclass/linux/linux-sysctl.c
index 6af1cb2..82b3c39 100644
--- a/drivers/staging/lustre/lustre/obdclass/linux/linux-sysctl.c
+++ b/drivers/staging/lustre/lustre/obdclass/linux/linux-sysctl.c
@@ -138,44 +138,14 @@ LUSTRE_RW_ATTR(max_dirty_mb);
 LUSTRE_STATIC_UINT_ATTR(debug_peer_on_timeout, &obd_debug_peer_on_timeout);
 LUSTRE_STATIC_UINT_ATTR(dump_on_timeout, &obd_dump_on_timeout);
 LUSTRE_STATIC_UINT_ATTR(dump_on_eviction, &obd_dump_on_eviction);
+LUSTRE_STATIC_UINT_ATTR(at_min, &at_min);
+LUSTRE_STATIC_UINT_ATTR(at_max, &at_max);
+LUSTRE_STATIC_UINT_ATTR(at_extra, &at_extra);
+LUSTRE_STATIC_UINT_ATTR(at_early_margin, &at_early_margin);
+LUSTRE_STATIC_UINT_ATTR(at_history, &at_history);
 
 #ifdef CONFIG_SYSCTL
 static struct ctl_table obd_table[] = {
-	{
-		.procname = "at_min",
-		.data     = &at_min,
-		.maxlen   = sizeof(int),
-		.mode     = 0644,
-		.proc_handler = &proc_dointvec,
-	},
-	{
-		.procname = "at_max",
-		.data     = &at_max,
-		.maxlen   = sizeof(int),
-		.mode     = 0644,
-		.proc_handler = &proc_dointvec,
-	},
-	{
-		.procname = "at_extra",
-		.data     = &at_extra,
-		.maxlen   = sizeof(int),
-		.mode     = 0644,
-		.proc_handler = &proc_dointvec,
-	},
-	{
-		.procname = "at_early_margin",
-		.data     = &at_early_margin,
-		.maxlen   = sizeof(int),
-		.mode     = 0644,
-		.proc_handler = &proc_dointvec,
-	},
-	{
-		.procname = "at_history",
-		.data     = &at_history,
-		.maxlen   = sizeof(int),
-		.mode     = 0644,
-		.proc_handler = &proc_dointvec,
-	},
 	{}
 };
 
@@ -197,6 +167,11 @@ static struct attribute *lustre_attrs[] = {
 	&lustre_sattr_debug_peer_on_timeout.u.attr,
 	&lustre_sattr_dump_on_timeout.u.attr,
 	&lustre_sattr_dump_on_eviction.u.attr,
+	&lustre_sattr_at_min.u.attr,
+	&lustre_sattr_at_max.u.attr,
+	&lustre_sattr_at_extra.u.attr,
+	&lustre_sattr_at_early_margin.u.attr,
+	&lustre_sattr_at_history.u.attr,
 	NULL,
 };
 
diff --git a/drivers/staging/lustre/sysfs-fs-lustre b/drivers/staging/lustre/sysfs-fs-lustre
index ea9982b..873e2cf 100644
--- a/drivers/staging/lustre/sysfs-fs-lustre
+++ b/drivers/staging/lustre/sysfs-fs-lustre
@@ -90,6 +90,59 @@ Description:
 		This is useful if yout debug buffer typically rolls over
 		 by the time you notice the eviction event.
 
+What:		/sys/fs/lustre/at_min
+Date:		July 2015
+Contact:	"Oleg Drokin" <oleg.drokin@xxxxxxxxx>
+Description:
+		Controls minimum adaptive timeout in seconds. If you encounter
+		a case where clients timeout due to server-reported processing
+		time being too short, you might consider increasing this value.
+		One common case of this if the underlying network has
+		unpredictable long delays.
+		Default: 0
+
+What:		/sys/fs/lustre/at_max
+Date:		July 2015
+Contact:	"Oleg Drokin" <oleg.drokin@xxxxxxxxx>
+Description:
+		Controls maximum adaptive timeout in seconds. If at_max timeout
+		is reached for an RPC, the RPC will time out.
+		Some genuinuely slow network hardware might warrant increasing
+		this value.
+		Setting this value to 0 disables Adaptive Timeouts
+		functionality and old-style obd_timeout value is then used.
+		Default: 600
+
+What:		/sys/fs/lustre/at_extra
+Date:		July 2015
+Contact:	"Oleg Drokin" <oleg.drokin@xxxxxxxxx>
+Description:
+		Controls how much extra time to request for unfinished requests
+		in processing in seconds. Normally a server-side parameter, it
+		is also used on the client for responses to various LDLM ASTs
+		that are handled with a special server thread on the client.
+		This is a way for the servers to ask the clients not to time
+		out the request that reached current servicing time estimate
+		yet and give it some more time.
+		Default: 30
+
+What:		/sys/fs/lustre/at_early_margin
+Date:		July 2015
+Contact:	"Oleg Drokin" <oleg.drokin@xxxxxxxxx>
+Description:
+		Controls when to send the early reply for requests that are
+		about to timeout as an offset to the estimated service time in
+		seconds..
+		Default: 5
+
+What:		/sys/fs/lustre/at_history
+Date:		July 2015
+Contact:	"Oleg Drokin" <oleg.drokin@xxxxxxxxx>
+Description:
+		Controls for how many seconds to remember slowest events
+		encountered by adaptive timeouts code.
+		Default: 600
+
 What:		/sys/fs/lustre/llite/<fsname>-<uuid>/blocksize
 Date:		May 2015
 Contact:	"Oleg Drokin" <oleg.drokin@xxxxxxxxx>
-- 
2.1.0

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux